330877-080-36-00 Bently Nevada Extension Cable 3300 XL 50 mm FluidLoc
Manufacturer: Bently Nevada
Product No.: 330877-080-36-00
Condition： In stock
Product Type: Extension Cable
Product Origin: USA
Payment: T/T, Western Union
Weight: 700g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
330877-080-36-00 | Bently Nevada 3300 XL 50 mm FluidLoc Extension Cable
The Bently Nevada 330877-080-36-00 is an 8.0-meter extension cable for compatible 3300 XL 50 mm proximity measurement systems. It provides the electrical connection between the probe assembly and the Proximitor Sensor within the configured measurement chain.
This version specifies a FluidLoc cable construction, PFA insulation, and an operating and storage temperature range of −51°C to +200°C (−31°F to +392°F). Engineers should verify cable routing, environmental exposure, and the complete system length before installation.
- Manufacturer: Bently Nevada
- Model: 3300 XL 50 mm Extension Cable
- Part Number: 330877-080-36-00
- Condition: New & Original in Factory Packing
- Factory Warranty: 12 Months
01 | Configuration Logic — Decode the Ordering Number
The ordering code identifies the cable length, cable construction, and agency approval option. Check each field against the existing installation before ordering a replacement.
| Code Position | Selected Code | Configuration Meaning |
|---|---|---|
| Base model | 330877 | 3300 XL 50 mm extension cable family |
| A — Cable length | 080 | 8.0 meters (26.2 feet) |
| B — Armor and cable option | 36 | FluidLoc cable |
| C — Agency approval | 00 | No approvals specified |
Complete configuration: 330877-080-36-00
The suffix 00 indicates no agency approvals in the supplied ordering information. Do not assume that this configuration carries hazardous-area approvals required by a particular installation.
02 | Electrical and Material Specifications
| Parameter | Specification | Engineering Relevance |
|---|---|---|
| Cable length | 8.0 m (26.2 ft) | Used when calculating the complete proximity measurement chain length. |
| Cable construction | 75 Ω triaxial cable | Match the specified cable type to the compatible system components. |
| Insulation material | Perfluoroalkoxyethylene (PFA) | Review chemical and temperature exposure against the application requirements. |
| Cable option | FluidLoc | Identifies the selected cable construction; confirm suitability for the installation environment. |
| Center-to-coaxial conductor resistance | 2.0 ± 0.5 Ω | Provides a reference for electrical inspection under the specified test conditions. |
| Coaxial-to-coaxial conductor resistance | 0.6 ± 0.2 Ω | Provides a reference for checking conductor continuity and resistance. |
| Operating temperature | −51°C to +200°C (−31°F to +392°F) | Check actual cable exposure and routing conditions. |
| Storage temperature | −51°C to +200°C (−31°F to +392°F) | Follow the stated storage limits and handling instructions. |
| Agency approval option | 00 — No approvals specified | Verify installation approval requirements separately. |
Use the specified resistance values as reference points, not as a substitute for the manufacturer's test procedure. Confirm the correct test points and isolation requirements before measuring the cable.
03 | Critical Selection Rule — Match the Complete System Length
The extension cable length and probe length must add up to the total length specified for the compatible Proximitor Sensor. An incorrect combination can make the measurement chain incompatible with its intended configuration.
Configuration check:
- Identify the exact proximity probe model and its specified length.
- Confirm the selected extension cable length is 8.0 meters.
- Verify the required Proximitor Sensor total length in the applicable system documentation.
- Confirm that the cable option and connector arrangement match the installed components.
- Check the full ordering code before commissioning a replacement.
Do not select an extension cable by length alone. Confirm the complete probe, extension cable, and Proximitor Sensor combination against Bently Nevada documentation for the specific measurement system.
04 | Where This Cable Fits in a Machinery Monitoring System
The 330877 extension cable supports compatible 3300 XL 50 mm proximity probe installations. Its role is to maintain the specified electrical connection between the probe assembly and the associated Proximitor Sensor.
- Large rotating machinery: Suitable for compatible proximity measurement arrangements where the 3300 XL 50 mm system is specified.
- Turbine monitoring installations: Supports the connection between the probe and signal-conditioning components in an approved system configuration.
- Industrial compressor systems: Can be used in compatible shaft-position or displacement measurement arrangements.
- High-temperature cable routes: The specified temperature range supports applications within the cable's documented limits.
- Maintenance and replacement work: Provides a candidate spare when the existing cable's part number, length, and construction match.
Actual application suitability depends on the probe system, installation environment, cable routing, and required approvals. Confirm these details before using the cable in a machinery protection circuit.
05 | Field Inspection and Troubleshooting
An extension cable fault can affect signal continuity or measurement stability. However, unstable readings do not automatically indicate a defective cable; the probe, connectors, Proximitor Sensor, and monitoring channel may also contribute.
| Observed Symptom | Inspection Focus | Recommended Action |
|---|---|---|
| Unexpected or unstable measurement readings | Connector seating, cable damage, routing, and system compatibility | Inspect the connection path before replacing the probe or sensor. |
| Open-circuit indication or missing signal | Conductor continuity and connector condition | Follow the manufacturer's isolation and continuity-test procedure. |
| Resistance outside the stated reference range | Test points, conductor condition, and measurement setup | Repeat the test under the specified conditions and compare results with approved limits. |
| Intermittent readings during machinery operation | Connector security, cable strain, abrasion, and routing near interference sources | Inspect mechanical damage and review the installed cable route. |
| Replacement assembly does not match the required configuration | Probe length, cable length, cable option, and Proximitor Sensor requirements | Recheck the complete measurement-chain configuration before energizing the system. |
Before disconnecting or testing components, follow the plant's machinery protection procedures. Use approved test equipment and the manufacturer's instructions to avoid damaging sensitive measurement electronics.
06 | Global PLC Spare HUB's Insight
For proximity measurement systems, extension cable selection is an electrical configuration task as well as a mechanical routing decision. A cable may fit physically but still fail to match the required system length or cable specification.
During maintenance, engineers should record the complete cable part number before removal. Verify the 8.0-meter length, FluidLoc option, and approval suffix against the installed equipment records.
When troubleshooting a suspected cable fault, inspect the connectors and routing first. Then test conductor continuity and resistance using the manufacturer's prescribed procedure. Compare results with the specified reference values before replacing other components in the measurement chain.
The 330877-080-36-00 configuration lists no agency approvals. If the installation requires specific hazardous-area approvals, verify the applicable system requirements and select an approved configuration where necessary.
07 | Installation and Maintenance Checklist
- Verify the complete part number before installation.
- Confirm that the probe and extension cable lengths match the required Proximitor Sensor total length.
- Check the cable route for abrasion, excessive mechanical strain, and connector stress.
- Review the operating and storage temperature limits at the actual installation location.
- Inspect connector condition and follow the approved resistance or continuity-test procedure.
- Confirm the cable construction and approval requirements for the installation area.
- Document the replacement part number and relevant commissioning checks.
08 | Product Supply, Warranty and Shipping
- Product: Bently Nevada 3300 XL 50 mm Extension Cable
- Part number: 330877-080-36-00
- Condition: New & Original in Factory Packing
- Warranty: 12 months, subject to the seller's written warranty terms.
- Shipping methods: FedEx, UPS, and DHL, subject to destination and shipping arrangements.
- Order verification: Provide the complete part number and compatible probe or Proximitor Sensor details when requesting a quotation.
09 | Frequently Asked Questions
Q1: What records should maintenance teams retain after replacing an extension cable?
A: Record the complete part number, installation date, associated probe and Proximitor Sensor models, and inspection results. These records simplify future compatibility checks and fault tracing.
Q2: Can a cable with the same length but a different cable option be used?
A: Do not assume interchangeability. Confirm the cable construction, electrical characteristics, and approval requirements against the manufacturer's documentation for the installed measurement system.
Q3: What should engineers check if the cable passes continuity testing but the signal remains abnormal?
A: Review the complete measurement chain, including connector condition, probe compatibility, Proximitor Sensor requirements, and monitoring-channel configuration. Continuity alone does not establish full system compatibility.
Q4: How should buyers evaluate a spare cable for a critical machinery installation?
A: Match the complete ordering code and confirm the required system length, environmental limits, and approval status. For critical machinery, validate the replacement against the approved bill of materials before installation.
Q5: What information should I provide when requesting technical assistance?
A: Provide the cable part number, probe model, Proximitor Sensor model, observed symptoms, and any test results. Include installation temperature and routing details if environmental exposure may be relevant.
Request a Quote from Global PLC Spare HUB
Contact Global PLC Spare HUB for pricing, availability, and compatibility checks for the Bently Nevada 330877-080-36-00 extension cable. Share your existing probe and Proximitor Sensor details to help verify the required cable configuration.
Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.
People Also Bought
