330907-05-30-70-12-CN Bently Nevada 3300 NSv Reverse Mount Probe

Global PLC Spare HUB's Insight

The 330907-05-30-70-12-CN is an advanced evolution in proximity sensing, specifically designed for challenging environments where legacy 190-series probes falter. At Global PLC Spare HUB, we value the NSv series for its exceptional side-view suppression, which allows for precise gap measurement on small-diameter shafts without the common scale-factor errors associated with older technology. Its robust TipLoc and ClickLoc construction makes it the gold standard for process compressor health monitoring.

Configuration Breakdown

• 330907-05-30: 3300 NSv Reverse Mount Probe (M10x1 Thread)
  • Total Length: -70 (7.0 meters)
  • Connector/Cable: -12 (Miniature ClickLoc / FluidLoc cable)
  • Agency Approval: -CN (Country Specific)

Technical Specifications

• Linear Range: 1.5 mm (60 mils).
• Incremental Scale Factor (ISF): 7.87 V/mm (200 mV/mil).
• Operating Temperature: -52 °C to +177 °C.
• Material: Polyphenylene sulfide (PPS) tip, 304 Stainless Steel (SST) case.
• Resistance: 5.9 Ω ± 0.9 Ω (Probe tip center to outer).
• Torque Specs: 7.5 N•m (Recommended) / 22.6 N•m (Max Rated).

Applications & Diagnostic Capability

• Ideal For: High-speed process gas compressors, small induction motors, and specialized turbomachinery.
• Application: Radial vibration monitoring, shaft centerline displacement, and precise thrust position tracking.
• Diagnostic Capability: Superior sensitivity in restricted spaces; effective at capturing high-frequency transient data without signal distortion.

Global PLC Spare HUB Support

• Warranty: 12-month manufacturer quality assurance coverage.
• Shipping: Swift delivery via FedEx, UPS, or DHL with rapid 24-48 hour dispatch.

Professional FAQ

• How does the FluidLoc cable prevent long-term signal degradation?
  It creates an internal capillary seal that stops pressurized process fluids from migrating through the cable assembly, protecting the electronics from chemical attack.
• Why is side-view suppression critical for small-diameter shafts?
  On shafts smaller than 13 mm, standard probes capture "noise" from the shaft curvature; the NSv characteristics actively minimize this, resulting in a cleaner signal.
• Are there any risks to the Viton O-ring seal during extreme cold?
  Yes; sustained exposure to temperatures below -34 °C (-30 °F) can induce seal embrittlement, potentially leading to pressure leaks.
• What is the significance of the "Reverse Mount" configuration?
  Reverse mount allows the probe to be installed from the inside of the machine case, providing an extra layer of protection for the cabling.
• How should I ensure the best torque during installation?
  Use a calibrated torque wrench set to 7.5 N•m; over-torquing risks deforming the M10x1 threads and compromising the pressure seal.

Selection Guidance & Comparison

• Comparison: For a different length or approval configuration, see the 330907-05-30-10-12-00.
• Advice: Always verify that your field wiring uses high-quality three-conductor shielded triad cable to maintain the integrity of the 1,000-foot signal path.
• Best Practice: Before final installation, check that the machine hole is perfectly tapped to M10x1; cross-threading a stainless steel housing can be impossible to rectify.

Tags