TWDDDO16TK Schneider Electric Twido Transistor Output Module

Product Overview

The TWDDDO16TK is a high-density solid-state discrete output expansion module engineered by Schneider Electric.

Designed strictly for the Twido programmable controller platform, it adds 16 electronic switching channels.

This compact component delivers precise, high-speed switching for low-power DC control circuits.

It utilizes source (PNP) logic configuration to match standard European and global automation layouts.

The unit provides robust short-circuit and overload protection for critical field instrumentation safety.

Global PLC Spare HUB's Insight

From an engineering perspective, the TWDDDO16TK excels due to its fast transistor response times.

A response speed of 300 µs significantly outperforms standard mechanical relay modules.

The dual-common architecture splits the 16 channels into two isolated 8-point groups.

This layout permits a substantial total current capacity of 2 A per output common.

We recommend this module for high-cycle applications where physical relays would suffer from contact wear.

System Compatibility & Target Equipment

This expansion module integrates directly with the following industrial hardware platforms:

• Schneider Electric Twido modular and compact base controllers
• 24 V DC industrial solenoid valves and hydraulic pilot valves
• Electronic indicators, alarm stacks, and control panel pilot lights
• Interfacing terminals accepting HE-10 multi-pin ribbon cables

Technical Specifications

• Brand: Schneider Electric
• Model: TWDDDO16TK
• Product Series: Twido
• Module Type: Discrete solid-state output module
• Output Count: 16 channels
• Output Type: Transistor (Solid State)
• Output Logic: Source (PNP configuration)
• Nominal Output Voltage: 24 V DC
• Operating Voltage Range: 20.4 V to 28.8 V DC
• Maximum Current Per Channel: 500 mA (0.5 A)
• Maximum Current Per Common: 2 A (2 common points total)
• Turn-On Response Time: 300 µs maximum
• Turn-Off Response Time: 450 µs maximum
• Residual Voltage State 1: ≤ 0.2 V across switching transistor
• Maximum Inductive Load: 2000 mH
• Maximum Tungsten Load: 16 W
• Internal Circuit Isolation: 1500 Vrms for 1 minute via photocoupler
• Internal Bus Current Consumption: 10 mA at 5 V DC maximum
• External Power Current Consumption: 40 mA at 24 V DC maximum
• Enclosure Protection Class: IP20
• Operating Temperature Window: 0 °C to 55 °C
• Net Weight: 0.07 kg

Core Application Scenarios

• High-speed sorting gate actuation in logistics fulfillment centers
• Pneumatic cylinder manifold control in assembly automation machinery
• Pulse-width modulation tasks for small industrial heating elements
• Dosing pump activation within water treatment control panels

Advanced Diagnostic Capabilities

• Built-in electronic sensors trip immediately during overload or short-circuit faults.
• Hardware protection suppresses inductive voltage spikes caused by heavy inductive coils.
• Photocoupler barriers isolate external field faults from damaging the CPU bus.

Procurement & Logistics Terms

• Processing Time: Order dispatch finalized within 24 to 48 hours
• International Shipping: Express transit via FedEx, UPS, and DHL
• Warranty Policy: Comprehensive 12-month hardware guarantee
• Package Inclusions: One factory-original TWDDDO16TK transistor output unit

Engineering Selection Guide

• Calculate total concurrent current load to avoid exceeding the 2 A common limit.
• Select this transistor model only for pure DC loads; it cannot switch AC.
• Ensure your wiring plan incorporates pre-wired HE-10 connector modules for reliable grounding.

FAQ

What is the primary advantage of the dual common point architecture?

It divides the electrical load across separate power groups to prevent thermal overloading.

Can I use this module to directly switch high-frequency inductive loads?

Yes, the 2000 mH rating accommodates most compact solenoids without requiring external flyback diodes.

How does the transistor protection reset after a short-circuit event?

Clear the external wiring short circuit and cycle the 24V DC field power supply.

What happens if I inadvertently connect a sink-configured device to these outputs?

The circuit will fail to complete because this source module only supplies positive current.

Why should I select this module over a standard relay output option?

Choose this solid-state version if your application demands rapid, repetitive switching cycles without wear.

Tags