IS200TAMBH1ACB GE Mark VI Acoustic Board | In Stock

Product Architecture & Overview

The GE IS200TAMBH1ACB (IS200TAMBH1ACB) acts as an acoustic monitoring terminal board.

It belongs to the Mark VI turbine control system series.

The unit provides nine channels for high-precision acoustic signal acquisition and processing.

Engineers use this module to monitor combustion dynamics and mechanical health.

Technical Specifications

• Core Architecture & Hardware Specifications
  • Brand & Origin: General Electric (USA)
  • Model Number: IS200TAMBH1ACB
  • Product Series: Mark VI Speedtronic System
  • Equipment Type: Acoustic Monitoring Terminal Board (TAMB)
  • Channel Capacity: 9 Independent Acoustic Channels
• Signal Handling & Electrical Characteristics
  • Auxiliary Power Outputs: Current-limited +24V DC and standard +24V DC per channel
  • Input Mode Selection: Current mode (250 Ω internal burden) or direct voltage mode via JPx (even) jumpers
  • Return Line Routing: Tied to PCOM or floating via JPx (odd) jumpers
  • Constant Current Logic: Controlled via CCSELx logic signals from VAMB board
  • Operating Temperature Range: -30 to +65 °C (-22 to +149 °F)

Installation & Configuration Guide

Set even jumpers (JPx) to select current or voltage input modes.

Current mode engages an internal 250 ohm resistor for 4-20 mA current loops.

Set odd jumpers (JPx) to ground or float return lines (RETx).

Select PCOM to reference power common or choose OPEN to eliminate ground loops.

Keep constant current sources disabled during initial power-up logic sequences.

Diagnostic Capabilities & Fault Detection

A high-impedance DC bias continuously supervises sensor connection integrity.

The connected VAMB board detects voltage shifts caused by broken transducer cables.

Fault alerts trigger immediately when an open circuit condition occurs in field wiring.

Dual power outputs protect sensor loops against overcurrent short circuits.

Target Applications & System Integration

Monitors combustion dynamics inside heavy-duty gas turbine burner cans.

Connects directly to the VAMB acoustic monitoring processor board.

Interfaces charge amplifiers and piezo sensors in high-vibration power generation plants.

Global PLC Spare HUB's Insight

In a 7F gas turbine installation, severe flame pulsation caused false acoustic alarms.

Replacing worn cabling and setting IS200TAMBH1ACB jumpers to isolated return mode fixed ground loops.

The 250 ohm internal burden resistor delivered stable voltage conversion without signal drift.

High-impedance DC bias detected a loose sensor lead before severe combustor damage occurred.

Selection & Procurement Guide

Confirm channel counts to match your acoustic transducer quantity before installation.

Select current input mode when connecting 4-20 mA charge amplifier transmitters.

Verify hardware revision code IS200TAMBH1ACB to match existing panel baseplates.

Package List & Delivery Terms

• Included Items: One factory-original IS200TAMBH1ACB acoustic terminal board.
• Warranty Term: Full 12-month factory coverage on all parts.
• Dispatch Speed: Ships from warehouse stock within 24 to 48 hours.
• Global Logistics: Express delivery via FedEx, UPS, or DHL.

Frequently Asked Questions

Q1: How do engineers switch between voltage and current input modes?

A1: Adjust even-numbered jumpers (JPx) on the board to select current or voltage mode.

Q2: Why does the board keep constant current sources inactive during startup?

A2: Startup delay prevents current spikes before software configuration parameters load completely.

Q3: What purpose does setting odd jumpers to OPEN serve during commissioning?

A3: Setting odd jumpers to OPEN isolates return lines to prevent ground loop noise.

Q4: How does the system detect disconnected piezo sensor cables?

A4: High-impedance DC bias detects impedance breaks and alerts the VAMB processor instantly.

Q5: What power redundancy features exist for field transducer loops?

A5: Each channel delivers both current-limited and standard +24V DC auxiliary power outputs.

Tags