Home 990-10-50-02-01 Bently Nevada 3300 NSv Vibration Monitoring Transmitter
990-05-XX-01-00 Bently Nevada Vibration Transmitter 990 Series
990-05-XX-01-00 Bently Nevada Vibration Transmitter 990 Series
990-05-XX-01-00 Bently Nevada Vibration Transmitter 990 Series
990-05-XX-01-00 Bently Nevada Vibration Transmitter 990 Series
990-05-XX-01-00 Bently Nevada Vibration Transmitter 990 Series
990-05-XX-01-00 Bently Nevada Vibration Transmitter 990 Series

990-10-50-02-01 Bently Nevada 3300 NSv Vibration Monitoring Transmitter

  • Manufacturer: Bently Nevada

  • Product No.: 990-10-50-02-01

  • Condition: In stock

  • Product Type: Vibration Transmitter

  • Product Origin: USA

  • Payment: T/T, Western Union

  • Weight: 430g

  • Shipping port: Xiamen

  • Warranty: 12 months

Selected quantity: 1
Request a quote

Estimate delivery times: 12-26 days (International), 3-6 days (United States).

Return within 30 days of purchase. Duties & taxes are non-refundable.

Guaranteed Safe Checkout

Visa
PayPal
Mastercard
American Express

990-10-50-02-01 | Bently Nevada 990 Series Vibration Transmitter

The Bently Nevada 990-10-50-02-01 is a two-wire vibration transmitter for continuous machinery condition monitoring. It accepts signals from a compatible 3300 NSv Proximity Probe and extension cable. The transmitter converts shaft displacement measurements into a standard 4–20 mA output.

This configuration provides a 0–10 mils peak-to-peak (0–250 μm pp) measurement range. It features a 5.0-meter system length, bulkhead screw mounting, and CSA Division 2 approval option.

The transmitter supports integration with industrial PLC, DCS, and machinery monitoring systems. Its independent zero and span adjustments simplify measurement calibration. The NOT OK signal defeat function also helps identify abnormal measurement conditions.

Technical Specifications

Parameter Specification
Manufacturer Bently Nevada
Model 990-10-50-02-01
Series 990 Vibration Transmitter
Product Type Two-Wire Vibration Transmitter
Compatible Probe 3300 NSv Proximity Probe
Measurement Range 0–10 mils pp (0–250 μm pp)
System Length 5.0 m (16.4 ft)
Mounting Bulkhead screws
Agency Approval Option CSA Division 2
Input Power +12 to +35 VDC
Power Supply Reference 28 VDC
Output Signal 4–20 mA DC
Output Configuration Two-wire loop-powered
Loop Accuracy ±1.5% over specified full-scale range
Maximum Loop Resistance 1,000 Ω at 35 VDC, including cable
Current Limiting 23 mA typical
Frequency Response 5 Hz to 6,000 Hz (+0, -3 dB)
Probe Gap 0.5–1.75 mm (20–55 mils)
Minimum Target Diameter 9.5 mm (0.375 in)
Zero and Span Independent external adjustments
NOT OK Output Below 3.6 mA within 100 μs
Signal Recovery 2–3 seconds after NOT OK clears
Maximum Probe Output Cable Distance 3 m (10 ft), BNC connection
Weight 0.43 kg (0.9 lb)
Country of Manufacture USA

Configuration Breakdown | Model Number Explanation

The catalog number identifies the transmitter's measurement range, system length, mounting arrangement, and approval option.

Code Configuration Description
990 Product Family Bently Nevada 990 Vibration Transmitter
10 Full-Scale Option 0–10 mils pp (0–250 μm pp)
50 System Length 5.0 m (16.4 ft)
02 Mounting Option Bulkhead screws
01 Agency Approval CSA Division 2

Complete configuration:

  • Measurement range: 10 mils peak-to-peak.
  • System length: 5.0 meters.
  • Mounting arrangement: Bulkhead screws.
  • Approval option: CSA Division 2.

Measurement Principle and Signal Architecture

The 990-10-50-02-01 converts proximity probe displacement signals into a proportional current output.

  • Signal acquisition: A compatible 3300 NSv probe measures shaft displacement without physical contact.
  • Signal transmission: The probe and extension cable connect to the transmitter.
  • Signal conditioning: The transmitter processes the incoming displacement signal.
  • Analog output: The transmitter generates a 4–20 mA signal.
  • Control integration: A PLC or DCS receives the signal for monitoring and alarm processing.

Output Performance and Electrical Characteristics

The two-wire output supports conventional industrial analog input interfaces.

Performance Item Value
Output Range 4–20 mA DC
Full-Scale Measurement 0–10 mils pp
Loop Accuracy ±1.5%
Frequency Response 5 Hz–6,000 Hz
Maximum Loop Resistance 1,000 Ω at 35 VDC
Current Limiting 23 mA typical
Supply Voltage +12 to +35 VDC

The specified loop accuracy uses a TEST signal input and voltage measurement across a 250 Ω loop resistance. The ±1.5% error adds to the Prox Out incremental scale factor.

NOT OK Detection and Signal Recovery

The transmitter provides a dedicated NOT OK signal defeat function. It changes the current output when the measurement circuit detects an invalid condition.

Operating Condition Output Response
Normal Operation 4–20 mA proportional output
NOT OK Condition Below 3.6 mA
Detection Response Within 100 μs
Signal Recovery 2–3 seconds after fault removal

Configure the receiving analog input to recognize the below-3.6 mA condition. This helps distinguish invalid measurements from normal machinery vibration.

Model Selection Comparison | 990-10 and 990-05

The following comparison helps engineers select the appropriate full-scale range and mounting configuration.

Selection Parameter 990-10-50-02-01 990-05-50-01-01
Product Family 990 Series 990 Series
Full-Scale Option 10 mils pp 5 mils pp
Measurement Range 0–250 μm pp 0–125 μm pp
System Length Code 50 50
System Length 5.0 m 5.0 m
Mounting Code 02 01
Approval Code 01 01

Alternative model: 990-05-50-01-01 Bently Nevada 990 Vibration Transmitter

Engineering Selection Recommendations

  • Choose 990-10-50-02-01 when the application requires a 0–10 mils pp range.
  • Choose 990-05-50-01-01 when the application requires a 0–5 mils pp range.
  • Check the existing probe and extension cable configuration.
  • Verify mounting compatibility before replacement.
  • Reconfigure analog input scaling when changing full-scale ranges.
  • Review alarm thresholds after any measurement range change.

Important: The two configurations have different mounting codes. Do not assume direct mechanical interchangeability without checking the installation drawings.

Tags

Q: Are these parts 100% original and new?

A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.

Q: How fast is the shipping to my country?

A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.

Q: Can I get a formal quotation with shipping costs?

A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.

Q: Do you offer discounts for bulk orders?

A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.




12-Month Comprehensive Warranty

Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.

  • Coverage: Functional defects and hardware failures under normal operating conditions.
  • Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.

Returns & Exchange Policy

We offer a 30-day return policy to ensure you receive the exact part your system requires.

  • Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
  • RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
  • Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.

Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.