Home PM783F ABB Freelance AC 700F CPU Controller

PM783F ABB Freelance AC 700F CPU Controller

  • Manufacturer: ABB

  • Product No.: PM783F

  • Condition: In stock

  • Product Type: CPU Controller

  • Product Origin: SE

  • Payment: T/T, Western Union

  • Weight: 500g

  • Shipping port: Xiamen

  • Warranty: 12 months

Selected quantity: 1
Request a quote

Estimate delivery times: 12-26 days (International), 3-6 days (United States).

Return within 30 days of purchase. Duties & taxes are non-refundable.

Guaranteed Safe Checkout

Visa
PayPal
Mastercard
American Express

ABB PM783F – Freelance AC 700F CPU Controller

The ABB PM783F is a compact CPU controller for the Freelance AC 700F distributed control system. It executes process-control logic, coordinates I/O communication and manages multiple application tasks within a single controller.

Based on a Motorola PowerPC MPC8247 processor, the PM783F combines onboard Ethernet, two RS-232C interfaces and expandable I/O connectivity. Its multitasking architecture allows engineers to separate control functions by execution priority and cycle time, helping balance processing demand in compact automation applications.

01 | Controller Architecture at a Glance

Manufacturer ABB
Model PM783F
Article Number 3BDH000364R0005
Product Family Freelance AC 700F
Product Type CPU Controller
Processor Motorola PowerPC MPC8247 / PowerQUICC
Clock Frequency 96 MHz
Boolean Processing Performance 0.71 ms per 1,000 Boolean operations
Controller Redundancy Not supported
Lifecycle Status Active (according to supplied product data)

02 | Memory and Application Execution

The PM783F provides separate memory resources for program execution, internal operation and non-volatile storage. Its battery-backed SRAM supports retention of application data during power interruption.

Program Memory 2 MB battery-backed SRAM
Internal Memory 8 MB SDRAM and 4 MB Flash ROM
Application RAM 2 MB available for application
Data Backup Lithium battery, type TA 521F
Clock Synchronization Supported
Configured Tasks Up to 9 tasks per controller

Task scheduling: The controller supports eight cyclic, priority-driven tasks with adjustable cycle times, plus one cyclic PLC-type task that runs as fast as possible. This arrangement allows control functions with different response requirements to be organized separately.

03 | Communication and I/O Expansion

Ethernet Ports 1 onboard Ethernet interface
Ethernet Standard IEEE 802.3
Ethernet Speed 10/100 Mbit/s
Connector RJ-45, 8-pole female
Serial Interfaces 2 × RS-232C
Serial Interface Functions 1 general-purpose interface and 1 service-tool interface
Modbus Communication Supported through the applicable communication interface and configuration
Maximum Direct I/O Modules 8
PROFIBUS Expansion Optional interface module

The onboard Ethernet interface provides a connection for system communication. The serial ports support external communication and service diagnostics. The controller can also be expanded with up to eight direct I/O modules, subject to the system configuration.

04 | Power, Mechanical and Environmental Data

Power Supply 24 V DC
Power Consumption 24 W typical / maximum (as specified)
Power Dissipation 10 W
Dimensions (W × H × D) 67.5 × 76 × 54 mm
Weight 0.4 kg including base
Weight Without Base Approximately 0.15 kg (as separately stated)
Operating Temperature 0°C to +60°C
Storage Temperature -20°C to +75°C
Relative Humidity Maximum 95%, non-condensing
Vibration Resistance 1 g, 2 Hz to 150 Hz
Corrosion Protection G3 compliant, according to ISA 71.04
Protection Class IP20
Maximum Installation Altitude Below 2,000 m

05 | Engineering Functions and Operating Considerations

  • Distributed process control: Executes application logic within an AC 700F Freelance control architecture.
  • Task separation: Assigns control routines to cyclic tasks with different priorities and cycle times.
  • Communication integration: Uses Ethernet and serial interfaces for system connectivity, Modbus communication and service access.
  • Expandable I/O: Supports up to eight direct I/O modules, with optional PROFIBUS connectivity.
  • Local diagnostics: The front-panel display provides controller status and diagnostic information.
  • Access protection: The controller can be locked using its keys to block application and firmware downloads. The lock state is indicated on the display.

06 | Installation and Maintenance Notes

  1. Verify the system configuration: Confirm that the PM783F is intended for the target AC 700F installation and check the project engineering version before replacement.
  2. Check the 24 V DC supply: Verify supply polarity, voltage stability and available power capacity before energizing the controller.
  3. Inspect communication wiring: Check the RJ-45 Ethernet connection and RS-232C cable assignments against the application wiring documentation.
  4. Review I/O expansion: Confirm module count, module types and PROFIBUS interface requirements before installing the controller.
  5. Check battery-backed memory: Inspect the lithium backup battery condition and follow ABB's approved replacement procedure to protect retained data.
  6. Confirm controller access state: Check the front display to determine whether the controller is locked before attempting an application or firmware download.

07 | Standards and Certifications

CE Marking Yes
EMC Emission EN 61000-6-4
EMC Immunity EN 61000-6-2
Electrical Safety EN 50178, IEC 61131-2, UL 61010-1, UL 61010-2-201
Hazardous Location cULus Class I, Division 2
Marine Approval DNV
RoHS Directive 2011/65/EU and (EU) 2015/863
WEEE Directive 2012/19/EU

08 | Typical Application Areas

  • Compact process automation and distributed control systems
  • Freelance AC 700F controller installations
  • Industrial machine and utility control
  • Systems requiring mixed Ethernet and serial communication
  • Small and medium-sized process I/O applications

9 | Ordering and Supply Information

  • Product: ABB PM783F CPU Controller
  • Article Number: 3BDH000364R0005
  • Series: Freelance AC 700F
  • Condition: New & Original in Factory Packing
  • Warranty: Factory Warranty: 12 Months
  • Shipping: FedEx, UPS and DHL available

Contact our sales team for current availability, pricing and compatibility confirmation. Please provide the complete part number and your application details when requesting a quotation.

Tags

Q: Are these parts 100% original and new?

A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.

Q: How fast is the shipping to my country?

A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.

Q: Can I get a formal quotation with shipping costs?

A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.

Q: Do you offer discounts for bulk orders?

A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.




12-Month Comprehensive Warranty

Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.

  • Coverage: Functional defects and hardware failures under normal operating conditions.
  • Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.

Returns & Exchange Policy

We offer a 30-day return policy to ensure you receive the exact part your system requires.

  • Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
  • RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
  • Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.

Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.