3BSE072270R1 ABB AC 800M SM812K01 SIL3 Safety CPU Module
Manufacturer: ABB
Product No.: SM812K01
Condition: In stock
Product Type: CPU Module
Product Origin: SE
Payment: T/T, Western Union
Weight: 700g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
ABB 3BSE072270R1 SM812K01 – Safety Control Core
The ABB 3BSE072270R1 is an SM812K01 Safety CPU module for ABB AC 800M safety control systems.
It provides high-integrity processing for safety-related control applications. The module supports redundant configurations and SIL 3 applications when correctly engineered and configured.
This product package includes the SM812 Safety Module, TP868 Baseplate, and TK852V10 synchronization link cable. It is specified for use with PM857, PM863, and PM867 controllers.
For system integration, check the controller configuration, firmware revision, and 800xA version before installation. The stated compatibility begins with ABB System 800xA 6.0.2.
01 | Safety Architecture and Operating Role
- Safety processing: Executes application logic for high-integrity control functions.
- SIL capability: Designed for SIL 3 safety applications, subject to the applicable safety manual and system requirements.
- Redundant operation: Supports redundant configurations with a maximum stated switchover time of 10 ms.
- Controller integration: Specified for use with PM857, PM863, and PM867.
- System compatibility: Compatible with ABB System 800xA 6.0.2 and later, subject to configuration requirements.
Engineering note: SIL 3 capability does not automatically establish the safety integrity of the complete application. The system design, configuration, validation, and maintenance must follow ABB safety documentation.
02 | Hardware and Performance Profile
| Parameter | Specification |
|---|---|
| Manufacturer | ABB |
| Article number | 3BSE072270R1 |
| Product model | SM812K01 |
| Product type | Safety CPU Module |
| System family | ABB AC 800M |
| Processor type | MPC866 |
| Clock frequency | 133 MHz |
| Memory | 64 MB |
| Firmware storage | 4 MB Flash PROM |
| Application flash storage | No |
| Redundancy | Supported |
| High integrity | Yes |
| Redundant configuration switchover | Maximum 10 ms |
Performance data: The supplied specifications do not state a confirmed Boolean operation rate or application-available RAM value. These figures should be checked against the applicable ABB technical documentation.
03 | Power Supply and Electrical Data
| Parameter | Specification |
|---|---|
| Power supply | 24 V DC |
| Permitted voltage range | 19.2–30 V DC |
| Typical current consumption | 160 mA at 24 V DC |
| Maximum current consumption | 250 mA at 24 V DC |
| Power dissipation | 3.8 W |
| Rated isolation voltage | 50 V |
| Dielectric test voltage | 500 V AC |
Check the 24 V DC supply under normal and peak loading conditions. Include the module and associated system loads in the power budget.
04 | Environmental Limits and Protection
| Environmental parameter | Specification |
|---|---|
| Operating temperature | 0 to +55 °C |
| Storage temperature | -40 to +70 °C |
| Temperature change | 3 °C/min, IEC/EN 61131-2 |
| Relative humidity | 5–95%, non-condensing |
| Pollution degree | Degree 2, IEC/EN 61131-2 |
| Corrosion protection | G3 compliant with ISA 71.04 |
| Protection class | IP20, EN 60529 / IEC 529 |
| Maximum stated altitude | 2000 m, IEC/EN 61131-2 |
| Acoustic noise | Less than 55 dB(A) |
| Environmental classification | Industrial |
Vibration limits:
- 10–50 Hz: 0.0375 mm amplitude.
- 50–150 Hz: 0.5 g acceleration.
- 5–500 Hz: 0.2 g acceleration, as separately stated in the supplied data.
The supplied vibration ranges overlap and should be checked against the official ABB datasheet before using them as installation acceptance limits.
05 | Dimensions and Mechanical Data
| Parameter | Value |
|---|---|
| Width | 59 mm |
| Height | 186 mm |
| Depth | 127.5 mm |
| Weight | 0.63 kg, stated product weight |
| Weight including base | 0.7 kg |
Allow sufficient cabinet clearance for the module, baseplate, wiring, and maintenance access. Confirm the mechanical arrangement against the ABB installation drawings.
06 | Package Contents
The stated 3BSE072270R1 package includes:
- SM812: Safety Module
- TP868: Baseplate
- TK852V10: Synchronization link cable
Check the supplied components against the purchase order before installation. Additional accessories and documentation depend on the order configuration.
07 | Installation and Commissioning Considerations
- Verify the system architecture. Confirm the intended PM controller and safety CPU arrangement before mounting the module.
- Check software compatibility. Confirm the installed System 800xA version is 6.0.2 or later. Verify the applicable controller and firmware revisions.
- Inspect the package. Check the SM812 module, TP868 baseplate, and TK852V10 synchronization cable.
- Verify the power supply. Confirm the 24 V DC supply remains within the specified 19.2–30 V range.
- Configure the safety application. Follow the ABB Safety Manual and applicable project configuration rules.
- Validate redundancy. Check synchronization, controller status, and switchover behavior using the approved commissioning procedure.
- Complete safety validation. Perform the required functional tests and document the results before placing the application into service.
Important: Do not treat a successful CPU startup as proof of safety function integrity. Complete the required application validation and safety acceptance process.
08 | Certifications and Compliance
| Item | Stated compliance or approval |
|---|---|
| Functional safety | SIL 3 certified |
| TÜV approval | Yes |
| EMC emission | EN 61000-6-4 |
| EMC immunity | EN 61000-6-2 |
| Electrical safety | EN 50178, IEC 61131-2, UL 61010-1, UL 61010-2-201 |
| Hazardous location | cULus Class 1, Zone 2; AEx nA IIC T4; Ex nA IIC T4 Gc X |
| Marine approvals | ABS, BV, DNV, LR, CCS |
| RoHS | EU RoHS, UAE RoHS, CN RoHS |
| WEEE | Directive 2012/19/EU |
| CE marking | Yes |
Confirm the applicable certificate scope and product revision for the intended installation. Hazardous-area use must follow the certificate conditions and local regulations.
Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.



