Home 990-05-50-01-01 Advanced Bently Nevada 990 Vibration Transmitter
990-05-XX-01-00 Bently Nevada Vibration Transmitter 990 Series
990-05-XX-01-00 Bently Nevada Vibration Transmitter 990 Series
Bently Nevada 990-04-50-01-00 Transmitter Unit - Fast Delivery
990-05-XX-01-00 Bently Nevada Vibration Transmitter 990 Series
990-05-XX-01-00 Bently Nevada Vibration Transmitter 990 Series
Bently Nevada 990-04-50-01-00 Transmitter Unit - Fast Delivery

990-05-50-01-01 Advanced Bently Nevada 990 Vibration Transmitter

  • Manufacturer: Bently Nevada

  • Product No.: 990-05-50-01-01

  • Condition: In stock

  • Product Type: Vibration Transmitter

  • Product Origin: USA

  • Payment: T/T, Western Union

  • Weight: 430g

  • Shipping port: Xiamen

  • Warranty: 12 months

Selected quantity: 1
Request a quote

Estimate delivery times: 12-26 days (International), 3-6 days (United States).

Return within 30 days of purchase. Duties & taxes are non-refundable.

Guaranteed Safe Checkout

Visa
PayPal
Mastercard
American Express

Signal Conditioning & Vibration Measurement Architecture

The 990-05-50-01-01 is an industrial-grade vibration transmitter developed by Bently Nevada within the 990 Series platform. Engineered for seamless integration into PLC and SCADA control systems, this DIN-rail mountable unit receives raw signals from a non-contacting 3300 NSv proximity probe and converts them into a proportional 2-wire 4 to 20 mA analog output representing shaft relative vibration.

Part Number Nomenclature & Configuration Breakdown

Structural breakdown of the 990-05-50-01-01 part number:

  • 990-05-50-01-01 (Complete Model Assembly)
    • 990 — Base Vibration Transmitter Platform
    • -05 — Full-Scale Option: 0 to 5 mils pp (0 to 125 μm pp) vibration range
    • -50 — System Length Option: 5.0 metres (16.4 feet) total electrical length
    • -01 — Mounting Hardware Option: 35 mm DIN rail clips for standard cabinet installation
    • -01 — Agency Approval Option: CSA Division 2 hazardous area certification

Technical Specifications Matrix

Engineering Category Technical Parameter Operational Specification
Input & Compatibility Sensor Input Support 1 × non-contacting 3300 NSv Proximity Probe and extension cable
Target & Gap Requirements Min target size 9.5 mm (0.375 in) diameter; probe gap 0.5 to 1.75 mm (20–55 mils)
Electrical & Output Power Supply Range +12 to +35 Vdc input at transmitter terminals (28 V for Division 2 areas)
Signal Output & Accuracy 4 to 20 mAdc (2-wire); ±1.5% loop accuracy across specified full-scale range
Loop Resistance & Limiting Max 1,000 Ω loop resistance (including cable) at 35 Vdc; 23 mA current limiting
Dynamic Performance Frequency Response 5 Hz to 6,000 Hz (+0, -3 dB) vibration tracking bandwidth
Fault Diagnostics (NOT OK) Output drops below 3.6 mA within 100 μs on fault; recovers in 2–3 seconds
Physical & Environmental Physical Dimensions & Weight DIN-rail mountable; Net weight approximately 0.43 kg (0.9 lbm)
Calibration & Adjustments Non-interacting external zero and span potentiometer adjustments

Warranty Protection & Express Logistics

We stand behind the reliability of every 990-05-50-01-01 unit with a comprehensive 12-month warranty from the date of purchase. To support urgent plant turnarounds and maintenance schedules, we provide rapid global shipping via premier international carriers including FedEx, UPS, and DHL with complete tracking support.

Standard Package Contents & Selection Guidance

  • One 990-05-50-01-01 Vibration Transmitter Unit
  • Factory Calibration & Compliance Data Sheet
  • Verify that your monitoring loop power supply provides adequate voltage headroom (+12 to +35 Vdc) when accounting for total cable resistance up to 1,000 Ω.
  • Confirm that target shaft metallurgy matches standard AISI 4140 steel calibration curves to ensure linear scale factor accuracy.

Advanced Engineering FAQ

Q: Why is maintaining a probe gap between 0.5 and 1.75 mm critical for the 990-05-50-01-01 transmitter?

A: Operating within this 20 to 55 mil gap window ensures the raw proximity voltage stays within the linear operating region of the 3300 NSv sensor, preventing signal saturation and distortion across the 0-5 mils pp full scale.

Q: How does the transmitter's "NOT OK" signal defeat mechanism protect automated safety shutdown loops?

A: When an open circuit, disconnected probe cable, or power fault occurs, the internal diagnostic circuit immediately forces loop current below 3.6 mA within 100 microseconds, signaling the DCS to ignore invalid readings.

Q: What adjustments are available on the front panel during periodic transmitter calibration?

A: Technicians can utilize non-interacting external zero and span potentiometers to fine-tune the 4-20 mA output against known test input signals without dismantling field wiring.

Q: Can the transmitter be installed directly inside Class I, Division 2 hazardous plant areas?

A: Yes. The 990-05-50-01-01 features CSA Division 2 agency approval, allowing safe installation in classified areas when powered by an approved 28 V power supply and wired per hazardous location drawings.

Q: What factors should instrumentation engineers consider when substituting a DIN-rail transmitter for a traditional rack monitor?

A: DIN-rail transmitters eliminate the need for costly multi-slot card racks, providing a compact, loop-powered 4-20 mA interface that connects directly to existing PLC analog input cards while saving valuable control room cabinet space.

Tags

Q: Are these parts 100% original and new?

A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.

Q: How fast is the shipping to my country?

A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.

Q: Can I get a formal quotation with shipping costs?

A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.

Q: Do you offer discounts for bulk orders?

A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.




12-Month Comprehensive Warranty

Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.

  • Coverage: Functional defects and hardware failures under normal operating conditions.
  • Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.

Returns & Exchange Policy

We offer a 30-day return policy to ensure you receive the exact part your system requires.

  • Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
  • RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
  • Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.

Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.