330902-00-12-10-02-00 Bently Nevada 3300 NSv Proximity Probe
Manufacturer: Bently Nevada
Product No.: 330902-00-12-10-02-00
Condition: In stock
Product Type: Proximity Probe
Product Origin: USA
Payment: T/T, Western Union
Weight: 323g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
Transducer Architecture & Narrow-Sideview Design
The 330902-00-12-10-02-00 is a precision-engineered eddy current proximity probe belonging to the Bently Nevada 3300 NSv (Narrow Sideview) transducer system. Manufactured in the U.S.A., this armored 1/4-28 UNF probe targets centrifugal air compressors, refrigeration compressors, and compact turbomachinery where tight counterbore clearances and reduced target areas restrict standard 8 mm probes.
Part Number Suffix & Configuration Hierarchy
-
330902-00-12-10-02-00 (Complete Assembly Code)
- 330902 — Base Probe Model: 3300 NSv Probe, 1/4-28 UNF Thread, with Flexible Stainless Steel Armor
- -00 — Unthreaded Length Option: 0.0 in (Fully threaded case up to the tip transition)
- -12 — Overall Case Length Option: 1.2 in
- -10 — Total Cable Length Option: 1.0 meter (39 in)
- -02 — Connector & Cable Option: Miniature coaxial ClickLoc connector with standard FEP cable
- -00 — Agency Approval Option: Not required (Standard industrial area deployment)
Mechanical, Electrical & Environmental Data
| Engineering Domain | Parameter | Technical Specification |
|---|---|---|
| Identification | Manufacturer & Origin | Bently Nevada (Made in U.S.A.) |
| Model & Series | 330902-00-12-10-02-00 | 3300 NSv Series | |
| Mass / Weight | Approx. 14 to 150 g (0.5 to 5.3 oz), configuration dependent | |
| Physical & Materials | Case & Tip Materials | AISI 304 Stainless Steel (SST) case; Polyphenylene Sulfide (PPS) tip |
| Internal Seal | Viton O-ring differential pressure seal (untested prior to shipment) | |
| Thread Engagement Limit | 0.375 in maximum thread engagement for 1/4-28 UNF case | |
| Installation Torque | 5.1 N·m (45 in·lb) recommended; 7.3 N·m (65 in·lb) maximum rated | |
| Electrical & Cabling | Coaxial Cable Spec | 75 Ω coaxial, Fluoroethylene Propylene (FEP) insulated |
| Probe DC Resistance | 4.2 ± 0.5 Ω (center-to-outer conductor for 1.0 m length) | |
| Thermal Limits | Operating & Storage Temp | -52°C to +177°C (-62°F to +351°F) |
| Low-Temp Seal Advisory | Sustained exposure below -34°C (-30°F) risks premature Viton seal degradation |
Model Selection Comparison & Engineering Guidance
Compare the 330902-00-12-10-02-00 against the related armored 1/4-28 UNF variant 330902-00-95-05-01-00 to select the exact mechanical and electrical fit for your machine casing:
| Selection Attribute | 330902-00-12-10-02-00 (Current Model) | 330902-00-95-05-01-00 |
|---|---|---|
| Base Architecture | 330902 (1/4-28 UNF, Armored) | 330902 (1/4-28 UNF, Armored) |
| Unthreaded Length | 0.0 in (Option 00) | 0.0 in (Option 00) |
| Overall Case Length | 1.2 in (Option 12) | 9.5 in (Option 95) |
| Total Cable Length | 1.0 meter / 39 in (Option 10) | 0.5 meter / 20 in (Option 05) |
| Connector & Cable Type | ClickLoc connector, standard cable (Option 02) | ClickLoc connector with protector, standard cable (Option 01) |
| Agency Approval | Not required (Option 00) | Not required (Option 00) |
- Casing Wall Depth Recommendation: Choose the 330902-00-12-10-02-00 (1.2 in case) for thin-walled bearing housings or shallow internal brackets where rear clearance behind the mounting tap is tight. Select 330902-00-95-05-01-00 (9.5 in case) when reaching deep through thick compressor casings or external adapter blocks.
- Cable Routing & Connector Protection: If the miniature ClickLoc junction sits inside an oil-mist bearing cavity or exposed splash zone, the 330902-00-95-05-01-00 provides an integrated connector protector (Option 01) and a shorter 0.5 m pigtail, whereas the 330902-00-12-10-02-00 offers a 1.0 m reach for routing directly to an external junction box.
- System Electrical Tuning: Never mix 0.5 m and 1.0 m probes with mismatched extension cables; always match your extension cable length so total system electrical length equals exactly 5.0 m or 7.0 m to match the 3300 NSv Proximitor sensor calibration.
Field Installation & Reliability Checklist
- Limit thread engagement on the 1/4-28 UNF case to 0.375 in maximum to prevent mechanical distortion of the internal coil assembly.
- Torque the locknut strictly to 5.1 N·m (45 in·lb) during installation; never exceed the 7.3 N·m (65 in·lb) absolute limit.
- Verify DC loop resistance across the ClickLoc connector (4.2 ± 0.5 Ω) using a calibrated multimeter before closing the machine housing.
Turbomachinery Engineering FAQ
Q: Why is the 3300 NSv probe preferred over standard 8 mm probes in high-speed centrifugal compressors?
A: Its compact PPS tip and 1/4-28 UNF body require significantly smaller target areas and tighter side clearances, eliminating false eddy current field loading from adjacent counterbore walls or rotor shoulders.
Q: What causes premature seal leakage when operating the 330902-00-12-10-02-00 in cryogenic or cold-start applications?
A: Although the probe body survives down to -52°C, sustained operation below -34°C (-30°F) hardens the internal Viton O-ring beyond its elastic glass-transition point, compromising differential pressure sealing between the tip and case.
Q: Can technicians cut or splice the 1.0-meter FEP coaxial cable if excess slack remains inside the junction box?
A: Never cut or alter the coaxial cable length. The 75 Ω cable acts as a tuned capacitive element within the RF tank circuit; shortening it shifts the oscillator frequency and invalidates the linear scale factor.
Q: How does exceeding the 0.375-inch maximum thread engagement limit affect probe performance?
A: Over-threading compresses the thin-walled AISI 304 stainless steel sleeve near the sensor head, potentially cracking the internal ceramic/PPS coil encapsulation or shifting thermal drift characteristics.
Q: What field checks confirm whether an erratic gap voltage stems from the probe or the extension cable?
A: Disconnect the miniature ClickLoc connector and measure center-to-shield DC resistance directly on the probe; readings outside 4.2 ± 0.5 Ω or continuity to the stainless steel armor indicate internal conductor fatigue or moisture ingress.

Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.



