330902-00-95-05-01-00 Bently Nevada 3300 NSv Proximity Probe
Manufacturer: Bently Nevada
Product No.: 330902-00-95-05-01-00
Condition： In stock
Product Type: Proximity Probe
Product Origin: USA
Payment: T/T, Western Union
Weight: 323g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
Engineering Architecture and Sensor Design
The 330902-00-95-05-01-00 developed by Bently Nevada is a high-precision 330902 3300 NSv Proximity Probe featuring a 1/4-28 UNF thread with protective armor. It is engineered specifically to measure radial vibration and position on machinery with small shafts or low runout targets.
Configuration Breakdown
| Configuration Parameter | Suffix Code | Engineering Specification |
|---|---|---|
| Base Model | 330902 | 3300 NSv Probe with 1/4-28 UNF thread and armor |
| Unthreaded Length | -00 | 0.0 inches unthreaded case length |
| Overall Case Length | -95 | 9.5 inches total case length |
| Total Cable Length | -05 | 0.5 meter (20 inches) probe cable length |
| Connector & Cable Type | -01 | Miniature coaxial ClickLoc connector with protector |
| Agency Approval | -00 | Not required / standard non-hazardous build |
Technical Specifications and Physical Properties
- Brand: Bently Nevada
- Series: 3300 NSv Proximity Probes
- Probe Case Material: AISI304 stainless steel (SST)
- Probe Tip Material: Polyphenylene sulfide (PPS)
- Cable Specification: 75-ohm coaxial with FEP insulation
- DC Resistance: 4.0 ± 0.5 ohms center conductor to outer conductor
- Assembly Weight: Approximately 14 to 150 g (0.5 to 5.3 oz)
Installation and Torque Guidelines
- Apply a maximum rated torque of 7.3 N•m (65 in•lb) and a recommended torque of 5.1 N•m (45 in•lb) for 1/4-28 probe cases.
- Limit maximum thread engagement length to 0.375 inches to prevent casing distortion.
- Ensure the Viton O-ring maintains proper differential pressure sealing between the probe tip and case.
- Avoid exposing the probe tip to temperatures below -34 °C for prolonged periods to preserve pressure seal integrity.
Environmental Operating Limits
- Operating Temperature Range: -52 °C to +177 °C (-62 °F to +351 °F).
- Storage Temperature Range: -52 °C to +177 °C (-62 °F to +351 °F).
- Designed to withstand harsh industrial environments with robust FEP cable insulation and stainless steel armoring.
Diagnostics, Capabilities, and Application Suitability
- Delivers precise linear output for slow-roll measurements and specialized shaft geometries.
- Ideal for monitoring high-speed turbomachinery, centrifugal compressors, and small auxiliary gearboxes.
- Provides reliable signal transmission through high-frequency coaxial pathways for advanced machinery diagnostics.
Logistics, Shipping, and Warranty Terms
- Rapid international dispatch within 24 to 48 hours of order confirmation.
- Secure global transit via trusted courier services including FedEx, UPS, and DHL.
- Protected by a comprehensive 12-month industrial replacement warranty.
Global PLC Spare HUB's Insight
Our instrumentation engineers emphasize that when deploying the 330902-00-95-05-01-00, maintaining strict adherence to the 5.1 N•m recommended installation torque prevents micro-fracturing of the PPS probe tip. Furthermore, utilizing armored cables in high-vibration raceways eliminates induced electrical noise.
Model Selection and Comparison Guidance
When selecting proximity transducers for tight machinery clearance, evaluate your physical constraints against alternative configurations like the 330902-36-89-05-01-00 Bently Nevada 3300 NSv Armored Proximity Probe, which features differing case length metrics tailored for specialized mounting brackets. Match your shaft radial clearance requirements before finalizing suffix codes.
Frequently Asked Questions
Q: Why is the 330902-00-95-05-01-00 designated as an NSv probe model?
A: NSv probes are specifically designed for applications with small shaft diameters or low measurement target areas where standard proximity probes exhibit non-linear response curves.
Q: What precautions should be taken regarding the probe pressure seal?
A: The built-in Viton O-ring seals differential pressure; however, exposing the probe to temperatures below -34 °C for extended periods can cause premature seal degradation.
Q: How does the ClickLoc connector protect signal integrity during installation?
A: The ClickLoc miniature coaxial connector clicks into a locked position, preventing loosening caused by plant vibrations and maintaining stable contact resistance.
Q: What is the recommended method for verifying DC resistance during maintenance checks?
A: Measure resistance directly from the center conductor to the outer conductor, verifying it falls within the nominal 4.0 ± 0.5 ohm window.
Q: Can this probe be utilized in high-temperature compressor environments?
A: Yes, it is rated for continuous operation up to +177 °C, making it highly reliable for severe industrial thermal conditions.
Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.
People Also Bought
