330140-08-15-01-05 Bently Nevada 3300 XL Proximity Probe - Fast Global Shipping
Manufacturer: Bently Nevada
Product No.: 330140-08-15-01-05
Condition： In stock
Product Type: Proximity Probe
Product Origin: USA
Payment: T/T, Western Union
Weight: 323g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
330140-08-15-01-05 Bently Nevada 3300 XL Proximity Probe - Fast Global Shipping
Global PLC Spare HUB Review evaluates the 330140-08-15-01-05 sensor as an advanced engineering solution for rotating equipment performance tracking. Global PLC Spare HUB's Insight reveals that its TipLoc and CableLoc configurations deliver superior pull-strength resistance compared to legacy iterations. Industrial technicians rely on this measurement device to maintain safe operating margins across heavy-duty compressor trains.
Part Number Configuration Breakdown
| Configuration Layer | Selected Parameter | Technical Significance |
|---|---|---|
| Base Part Number | 330140 | Core identifier for unarmored 3300 XL 8 mm proximity transducer series. |
| Case Length Option | 08 (0.8 inches) | Optimized insertion depth for standard mechanical mounting threads. |
| Total Cable Length | 15 (1.5 meters / 4.9 feet) | Standard distance rating from probe tip to coaxial termination point. |
| Connector Design | 01 | Miniature coaxial ClickLoc connector featuring a protective boot. |
| Hazardous Approval | 05 | Full international compliance supporting CSA, ATEX, and IECEx certifications. |
Core Technical Specifications
| Performance Metric | Engineering Value |
|---|---|
| Brand & Model | Bently Nevada 330140-08-15-01-05 |
| Product Series | 3300 XL |
| Incremental Scale Factor | 7.87 V/mm (200 mV/mil) ±5% over linear range |
| Linear Measurement Span | 2 mm (80 mils) linear operating window |
| DC Loop Resistance | $7.73 \pm 0.50\ \Omega$ measured between center and outer conductors |
| Operating Temperature | -52°C to +177°C (-62°F to +350°F) for standard probe body |
Machinery Suitability and Diagnostic Capabilities
- Target Equipment: Deployed extensively on high-speed centrifugal pumps, industrial gas turbines, large steam generators, and integrally geared compressors.
- Diagnostic Focus: Uncovers rotor unbalance, shaft centerline migration, journal bearing wear, and oil whip instabilities prior to catastrophic machinery shutdown.
Supply Chain, Fulfillment, and Warranty Terms
- Fulfillment Carriers: Rapid dispatch within 24 to 48 hours utilizing premier global couriers including FedEx, UPS, and DHL.
- Warranty Protection: Fully backed by an exclusive 12-month replacement and performance guarantee from Global PLC Spare HUB.
Selection Guidance and Variant Comparison
When planning complex monitoring layouts, engineering teams must evaluate cable lengths and thread tolerances against enclosure limitations. For a variation featuring a shorter case depth while maintaining identical electronic profiles, review the companion option below:
- 330140-08-10-12-05: Incorporates adjusted case dimensions suited for tight casing clearance constraints. Verify your mounting bracket dimensions before finalizing selection.
Frequently Asked Questions
What practical advantages do TipLoc and CableLoc technologies offer during high-vibration operation?
TipLoc molding secures the internal coil tightly within the PPS plastic tip, while CableLoc delivers up to 330 N (75 lbf) pull strength. Together, they prevent internal wire fatigue and seal failures caused by continuous multi-axis mechanical vibration.
How does the 1.5-meter cable layout impact loop DC resistance values?
Longer cabling introduces slight conductive resistance variations. For the 1.5-meter variant, expect a nominal resistance of $7.73 \pm 0.50\ \Omega$, which technicians can check with a multimeter during calibration checks.
Why is it critical to avoid sub-zero storage conditions near the probe tip?
Exposing the probe assembly to ambient temperatures dropping beneath –34°C (-30°F) can compromise the Viton O-ring compound, leading to premature sealing degradation and fluid ingress.
What is the primary function of the CSA, ATEX, and IECEx certification option 05?
This hazardous area rating permits safe installation inside explosive atmospheres (Class I, Zone 0 or Division 2 environments) without risking spark ignition in petrochemical plants.
How can I verify that my field wiring matches the voltage output requirements?
Ensure your monitoring setup reads a standard incremental scale factor of 7.87 V/mm (200 mV/mil) across the 2 mm linear span, utilizing a proper -9 Vdc initial gap voltage.
Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.
People Also Bought
