16925-30 Bently Nevada Shielded Interconnect Cable | 30ft

Signal Integrity and Cable Profile

The 16925-30 by Bently Nevada is a high-performance shielded interconnect cable designed for precise vibration and proximity sensing data transmission. Engineered with 22 AWG (0.5 mm²) conductors, this cable ensures minimal signal attenuation over its 30-foot span. It serves as a vital bridge between sensitive proximity probes and monitoring instrumentation, maintaining EMI/RFI shielding integrity in demanding industrial environments.

Configuration and Specifications

• Part Number: 16925-30
• Cable Construction: 3-Conductor Shielded
• Termination Breakdown:
  • Instrument End: 3-Socket Plug
  • Termination End: Hardened Terminal Lugs
• Wire Gauge: 22 AWG (0.5 mm²)
• Operational Span: 30 Feet (Fixed)
• System Range: Minimum 2.0 ft to Maximum 99 ft

Logistics and Quality Assurance

• Global Logistics: Fast, reliable transit via FedEx, UPS, and DHL.
• Turnaround: Stocked orders dispatched within 24-48 hours.
• Warranty: Industry-standard 12-month performance warranty included.

Selection and Compatibility Guide

If your monitoring distance requirements vary, use the following options to maintain system-calibrated impedance levels:

Available Options:

• 16925-30 (30 ft): Current Selection
• 16925-50 (50 ft): View 16925-50 Technical Specs

Technical Suggestion: When upgrading from the 16925-30 to the 16925-50, always verify the probe system's maximum allowable capacitance. Excessive cable length beyond the system specification can introduce phase shift, potentially skewing vibration analysis results in high-frequency monitoring.

Professional FAQ

Q: Does this cable require specific conduit protection?
A: While the 16925-30 features robust shielding, we advise routing in dedicated conduit if exposed to areas with high oil mist or heavy foot traffic to prevent physical abrasion of the insulation.

Q: Can I use this for non-Bently Nevada vibration transducers?
A: This cable is optimized for standard 3-pin proximity systems. Check your transducer's pinout and impedance requirements to ensure full compatibility with the 3-socket plug.

Q: What is the benefit of the 22 AWG conductor size?
A: The 0.5 mm² conductor provides the ideal balance between low resistance for long-distance runs and physical flexibility for cabinet-side installation.

Q: Is there a specific torque requirement for the 3-socket plug?
A: Hand-tightening until snug is sufficient. Over-torquing can damage the internal pins; ensuring a clean, debris-free connection is more important for signal quality than extreme tightening.

Q: When should I choose a shielded cable over an armored version?
A: Choose shielded (16925-30) for internal cabinet or clean conduit runs. Use armored variants only when the cable is exposed to mechanical impact or harsh outdoor environmental factors.

Global PLC Spare HUB's Insight

The 16925-30 is a workhorse in vibration monitoring. Our technical review demonstrates that its 22 AWG shielding effectively rejects low-frequency noise common in AC-motor drive areas. It is particularly well-suited for Bently Nevada 3500 system rack-to-probe connections. Utilizing this genuine OEM-specification cable ensures that your diagnostic software receives raw, unpolluted data, which is essential for accurate peak-to-peak vibration measurements and bearing wear diagnostics.

Tags