Bently Nevada 128093-00-10-05-02-05 3300 XL NSv Proximity Sensor

Product Overview

The 128093-00-10-05-02-05 is an advanced 3300 XL NSv Proximity Sensor engineered by Bently Nevada. This specialized transducer system measures static and dynamic vibration and position in tight spaces. The probe utilizes patented TipShield technology to allow close mounting without cross-talk interference. Plant engineers deploy this hardware on high-speed rotating machinery with limited clearance.

Technical Specifications

• Brand: Bently Nevada
• Model / Part Number: 128093-00-10-05-02-05
• Series: 3300 XL NSv
• Measurement Range: 0 to 1.5 mm linear range
• Frequency Response: 0 Hz to 10 kHz flat response
• Sensitivity: 7.87 V/mm (200 mV/mil) nominal output
• Linearity: Within plus or minus 0.05 mm over linear range
• Resolution: Infinite resolution constrained by system noise floor
• Temperature Range: Probe tip -33°C to +177°C; Proximity sensor -35°C to +85°C
• Environmental Tolerance: Resistant to 100 percent condensing humidity and synthetic fluid splashes
• Interference Immunity: Advanced RFI and EMI shielding for high electromagnetic fields

Installation Guidelines

• Torque the probe mounting thread carefully using calibrated wrenches to prevent mechanical damage.
• Maintain proper clearance distances between adjacent probes to eliminate signal interference.
• Route coaxial extension cables away from high-voltage power conduits and variable frequency drives.
• Secure physical connections using ClickLoc miniature coaxial connectors to prevent loosening from machine vibration.

Commissioning and Maintenance Convenience

• Verify system gap voltage using a digital multimeter before starting rotating equipment.
• Calibrate output signals directly against standard target materials during initial setup.
• Inspect miniature connectors periodically for moisture ingress or mechanical wear.
• Replace damaged probes easily without recalibrating entire monitoring racks.

Compatibility and Integration

• Fully compatible with Bently Nevada 3500 machinery protection systems.
• Interfaces seamlessly with 3300 XL 5-meter and 9-meter system extension cables.
• Connects directly to standard industrial data acquisition systems and programmable logic controllers.

Approvals and Compliance

• Hazardous area certifications include ATEX, IECEx, CSA, and FM zone approvals.
• Complies with international electromagnetic compatibility and CE standards.

Package Contents and Warranty

• Package Contents: One 128093-00-10-05-02-05 proximity probe, protective cap, and mounting hardware.
• Shipping Methods: Expedited dispatch via FedEx, UPS, and DHL with 24-48 hour fulfillment.
• Warranty Terms: Backed by a comprehensive 12-month operational warranty.

Typical Applications and Diagnostic Capabilities

• Measures radial vibration on miniature steam turbines and high-speed compressors.
• Monitors axial thrust position on industrial gearboxes and centrifugal pumps.
• Detects shaft runout and eccentricity during startup sequences.
• Identifies early-stage bearing wear and rotor dynamic instability before catastrophic failure occurs.

Global PLC Spare HUB's Insight and Field Experience

Global PLC Spare HUB engineers frequently encounter installation errors where technicians mix incompatible probe tip lengths with standard probes. Using the 128093-00-10-05-02-05 NSv variant resolves space constraints in tight compressor casings where standard 8mm probes fail to fit. Field calibration requires strict adherence to target material curves to ensure accurate shaft vibration readings.

Frequently Asked Questions

Question: What is the primary difference between standard 3300 XL probes and the NSv model?

Answer: The NSv series features specialized tip geometry designed for small target areas and tight mechanical clearances where standard probes experience side-viewing errors.

Question: Can this sensor operate in hazardous classified environments?

Answer: Yes, the unit carries international intrinsic safety certifications for hazardous industrial locations.

Question: How do I select the correct extension cable length for this probe?

Answer: System length is calibrated as a total loop. Match your probe cable length and extension cable length to equal either five or nine meters total.

Question: What causes sudden voltage drift during machine operation?

Answer: Voltage drift usually stems from loose terminal connections, cable damage, or target surface scoring caused by foreign debris in the lube oil.

Tags