Home TM5SDO16T Schneider Electric 16-Channel Digital Output Module 24V DC 0.5A

TM5SDO16T Schneider Electric 16-Channel Digital Output Module 24V DC 0.5A

  • Manufacturer: Schneider Electric

  • Product No.: TM5SDO16T

  • Condition: In stock

  • Product Type: Digital Output Module

  • Product Origin: FR

  • Payment: T/T, Western Union

  • Weight: 200g

  • Shipping port: Xiamen

  • Warranty: 12 months

Selected quantity: 1
Request a quote

Estimate delivery times: 12-26 days (International), 3-6 days (United States).

Return within 30 days of purchase. Duties & taxes are non-refundable.

Guaranteed Safe Checkout

Visa
PayPal
Mastercard
American Express

Schneider Electric TM5SDO16T High-Density Slice I/O Overview

The Schneider Electric TM5SDO16T is an ultra-compact, 16-channel source (PNP) transistor digital output slice engineered for the Modicon TM5 distributed I/O architecture. Built into a narrow 12.5 mm housing weighing just 25 grams, this active-lifecycle module provides rapid 24 V DC actuator switching (≤ 300 µs turn-on/off) for solenoid valves, pilot relays, and indicator banks across Modicon M241, M251, M258, and LMC058 machine control systems.

Engineering Specification Matrix

Technical Domain Attribute Verified Specification
Output Architecture Channels & Switching Topology 16 channels, 24 V DC source (PNP) transistor
Load Capacity Maximum Output Current 0.5 A per channel
Switching Speed Turn-On / Turn-Off Response ≤ 300 µs
Dielectric Isolation Channel-to-Bus & Inter-Channel 500 Vrms AC (channel-to-bus); non-isolated between channels
Bus & Power Draw Supply & Backplane Consumption 24 V DC via TM5 bus; 2.6 W; 65 mA @ 5 V DC & 65 mA @ 24 V DC
Onboard Diagnostics Status LEDs & Circuit Safeguards ModuleOK, DcOk, NetworkOk; short-circuit, overload & reverse polarity
Controller Support Compatible Machine Platforms Modicon M241, M251, M258, LMC058
Mechanical Footprint Dimensions (H × W × D) & Mass 99 × 12.5 × 75 mm; 0.025 kg; IP20 ingress protection
Thermal Envelope Operating & Storage Limits 0 to +55 °C operating; -25 to +70 °C storage

Bus Power Budgeting & Field Wiring Architecture

  • Dual-Rail TM5 Bus Consumption: Draws 65 mA from the 5 V DC logic rail and 65 mA from the 24 V DC I/O power segment (2.6 W total dissipation), requiring accurate power-segment calculation when cascading multiple 16-channel slices.
  • Common-Reference PNP Grouping: All 16 source outputs share a common internal 24 V DC reference without inter-channel galvanic isolation, while maintaining 500 Vrms AC dielectric separation from the backplane communication bus.
  • High-Speed Machine Synchronization: Sub-300 µs switching latency supports deterministic camming, sorting diverters, and packaging actuation directly synchronized with LMC058 motion or M241/M251 logic scans.

Protection & Diagnostic Fault Handling

To minimize machine downtime during field wiring faults, every output stage integrates electronic short-circuit, thermal overload, and reverse-polarity protection. Front-edge status indicators (ModuleOK, DcOk, and NetworkOk) enable maintenance technicians to distinguish between a missing 24 V DC field power segment, a backplane bus fault, and an individual channel trip without connecting diagnostic software.

Field Commissioning & Troubleshooting FAQ

Q1: How many consecutive high-density output slices can be installed before adding a new 24 V DC power distribution module on the TM5 bus?

A1: While each slice draws only 65 mA from the 24 V DC bus segment for internal electronics, driving all 16 channels simultaneously at the 0.5 A maximum rating demands up to 8 A of field actuator current. Always verify the upstream TM5 power distribution bus rating (typically 10 A max per segment) and insert an additional 24 V DC power feed slice whenever cumulative simultaneous load currents approach the segment limit.

Q2: Why does the DcOk LED extinguish while NetworkOk stays green after replacing a field solenoid valve?

A2: A dark DcOk indicator alongside an active NetworkOk LED confirms that backplane logic communication with the Modicon controller is healthy, but the 24 V DC field power segment supplying the output drivers has dropped out. Inspect the upstream 24 V DC field supply fuse or check for a dead short across the newly wired solenoid coil that tripped the segment supply.

Q3: Can this slice drive 24 V DC inductive loads such as pneumatic solenoids without external flyback diodes?

A3: Although the transistor output stage includes internal clamping and overload protection, installing external freewheeling diodes or RC snubbers directly across large inductive solenoid coils is strongly recommended in high-cycle machines. Suppressing inductive kickback at the load prevents thermal stress on the 12.5 mm housing and reduces electrical noise on adjacent unisolated channels.

Q4: What wiring pitch and terminal block hardware are required to land 16 output signals onto a 12.5 mm wide module?

A4: The TM5 modular system separates the electronic slice from the bus base and removable spring/screw terminal block. Ensure you pair the electronic slice with the corresponding 16-pin TM5 bus base and spring-clamp terminal block so field conductors can be pre-wired and hot-swapped without disturbing adjacent I/O slices.

Q5: Is this module compatible with sink-type (NPN) field devices that switch the 0 V common rail?

A5: No. This unit utilizes positive-switching source (PNP) transistor drivers that source +24 V DC to the load when energized. Connecting NPN-configured loads that require switched 0 V sinking will result in continuous conduction or non-operation; use a dedicated sink output slice or an interposing interface relay instead.

Tags

Q: Are these parts 100% original and new?

A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.

Q: How fast is the shipping to my country?

A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.

Q: Can I get a formal quotation with shipping costs?

A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.

Q: Do you offer discounts for bulk orders?

A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.




12-Month Comprehensive Warranty

Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.

  • Coverage: Functional defects and hardware failures under normal operating conditions.
  • Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.

Returns & Exchange Policy

We offer a 30-day return policy to ensure you receive the exact part your system requires.

  • Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
  • RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
  • Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.

Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.