TM5SDI16D 16-Channel Digital Input Module Schneider Electric Modicon TM5
Manufacturer: Schneider Electric
Product No.: TM5SDI16D
Condition: In stock
Product Type: Digital Input Module
Product Origin: FR
Payment: T/T, Western Union
Weight: 200g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
System Architecture & Functional Role
Engineered for high-density distributed control cabinets, the TM5SDI16D is an ultra-compact 16-channel 24V DC sink digital input module produced by Schneider Electric within the active Modicon TM5 I/O slice ecosystem. Designed to interface seamlessly with Modicon M241, M251, M258, and LMC058 controllers, this TM5SDI16D unit packs 16 IEC 61131-2 Type 1 inputs into a slim 12.5 mm footprint, offering configurable input filtering and deterministic ≤3 ms signal acquisition.
Electrical & Hardware Specifications
| Technical Parameter | Specification Value |
|---|---|
| Manufacturer & Series | Schneider Electric Modicon TM5 (Active Lifecycle) |
| Module Catalog Number | TM5SDI16D |
| Input Topology | 16 channels, 24V DC sink logic (IEC 61131-2 Type 1) |
| Operating Voltage Window | 24V DC nominal (19.2V to 28.8V DC permitted operating range) |
| Per-Channel Current Draw | 3.75 mA at 24V DC nominal |
| Signal Response & Filtering | ≤3 ms response time with software-configurable input debounce filter |
| Dielectric Isolation | 500 Vrms AC between field channels and internal TM5 bus (no inter-channel isolation) |
| Bus Power & Dissipation | 2.5 W total consumption; 45 mA @ 5V DC bus, 60 mA @ 24V DC (all inputs active) |
| Status Diagnostics | Integrated hardware LED indicators for ModuleOK, DcOk, and NetworkOk |
| Dimensions & Environment | 99 × 12.5 × 75 mm (H×W×D); 0.025 kg; 0°C to +55°C operating; IP20 |
Field Installation & Commissioning Notes
- Common Potential Architecture: Because there is no galvanic isolation between individual channels, ensure all 16 field sensors share a common 24V DC reference potential to avoid ground loops.
- Debounce Filter Optimization: Adjust the configurable input filter time in EcoStruxure Machine Expert to suppress mechanical contact bounce on limit switches while preserving ≤3 ms speed for high-speed sensors.
- Bus Power Budgeting: Account for the 45 mA (5V DC) and 60 mA (24V DC) bus current draw when calculating total slice capacity downstream of your TM5 power distribution module.
- Controller Integration: Compatible directly with Modicon M241, M251, M258 logic controllers and LMC058 motion controllers via standard TM5 bus bases and terminal blocks.
Engineering Frequently Asked Questions (FAQ)
Q: How does the sink input logic on this slice dictate field sensor selection?
A: Sink inputs require field devices with PNP (sourcing) outputs that switch +24V DC into the module terminals when actuated. Connecting NPN (sinking) sensors directly will fail to register a logic high state without external pull-up resistors.
Q: What troubleshooting steps apply if the DcOk diagnostic LED remains off after powering the rack?
A: Verify that the upstream 24V DC I/O power distribution slice is energized and within the 19.2V to 28.8V DC tolerance window, and inspect the bus base interlocking clips for full mechanical seating.
Q: Why is inter-channel isolation omitted on high-density 12.5 mm slices, and what wiring rule does this enforce?
A: Omitting channel-to-channel isolation enables a compact 16-point footprint in a 12.5 mm width. Consequently, all 16 field inputs must be fed from the exact same 24V DC power supply common to prevent damaging reverse currents.
Q: When should engineers modify the default ≤3 ms input filter setting during commissioning?
A: Increase the filter delay when monitoring noisy relay contacts or long unshielded sensor runs to eliminate false triggers, or keep it at minimum for rapid conveyor photo-eyes.
Q: Can this slice be replaced in an active Modicon M251 or LMC058 system without disturbing field terminal wiring?
A: Yes, the modular three-piece TM5 design separates the bus base, electronic slice, and removable front terminal block, allowing technicians to swap the electronic module quickly without unscrewing individual sensor wires.
Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.



