Home TM5SAI4L 12-Bit Voltage/Current Input Module Schneider Electric Modicon

TM5SAI4L 12-Bit Voltage/Current Input Module Schneider Electric Modicon

  • Manufacturer: Schneider Electric

  • Product No.: TM5SAI4L

  • Condition: In stock

  • Product Type: Voltage/Current Input Module

  • Product Origin: FR

  • Payment: T/T, Western Union

  • Weight: 200g

  • Shipping port: Xiamen

  • Warranty: 12 months

Selected quantity: 1
Request a quote

Estimate delivery times: 12-26 days (International), 3-6 days (United States).

Return within 30 days of purchase. Duties & taxes are non-refundable.

Guaranteed Safe Checkout

Visa
PayPal
Mastercard
American Express

Signal Acquisition Architecture & System Role

The Schneider Electric TM5SAI4L is an ultra-compact, 4-channel analog input slice designed for high-density distributed I/O architectures within the Modicon TM5 system. Engineered to interface directly with industrial field transmitters, pressure transducers, and proportional valves, this electronic module supports software-selectable ±10V DC, 0-20 mA, and 4-20 mA signals on every individual channel.

Combining a 12.5 mm slim-profile footprint with deterministic sampling speeds down to 300 µs per channel, the TM5SAI4L delivers rapid closed-loop feedback and granular channel-level diagnostics for complex packaging, material handling, and OEM machine automation.

Hardware & Signal Specification Tree

  • Identification & Platform Classification
    • Manufacturer: Schneider Electric
    • Part Number: TM5SAI4L
    • Product Series: Modicon TM5 Distributed I/O System
    • Lifecycle Status: Active OEM Production
  • Analog Input & Conversion Performance
    • Channel Architecture: 4 single-ended input channels (individually software configurable)
    • Supported Input Ranges: ±10 Vdc voltage; 0-20 mA and 4-20 mA current loops
    • Digital Resolution: 12-bit signed integer representation (-32768 to +32767 across ±10V)
    • Measurement Accuracy: ±0.3% of full scale at 25°C (±0.5% FS across full thermal envelope)
    • Sampling & Cycle Timing: Selectable 1 ms or 300 µs per channel; 200 µs inter-channel offset; configurable digital filter (Off or Levels 2 to 128)
  • Isolation, Diagnostics & Power Consumption
    • Galvanic Isolation: 500 Vrms AC between field channels and internal TM5 bus (non-isolated between adjacent channels)
    • Real-Time Diagnostics: Per-channel under-range, over-range, and 4-20 mA open-wire break detection, plus ModuleOK, DcOk, and NetworkOk status flags
    • Power & Bus Draw: 24 Vdc field supply via TM5 power distribution; 1.2 W total dissipation; 3 mA @ 5V DC (TM5 bus) and 10 mA @ 24V DC
  • Mechanical & Environmental Envelope
    • Physical Dimensions: 99 × 12.5 × 75 mm (H × W × D); ultra-lightweight 0.025 kg mass
    • Thermal & Ingress Ratings: 0°C to +55°C operating temperature; -25°C to +70°C storage; IP20 finger-safe housing

Controller Compatibility & Backplane Assembly

Compatible Logic Controllers Modicon M241, Modicon M251, Modicon M258, and Modicon LMC058 motion controllers
Modular Slice Architecture Requires matching TM5 bus base and 12-pin removable spring/screw terminal block (sold separately)
Commissioning Environment Configured natively inside EcoStruxure Machine Expert (formerly SoMachine) via drag-and-drop hardware trees

Field Wiring & Commissioning Best Practices

  • Common-Reference Grounding: Because the four channels share a common internal reference without channel-to-channel isolation, ensure all connected field transmitters use isolated power supplies or share an equipotential ground plane to eliminate ground loops.
  • Noise Filtering Optimization: Engage the hardware low-pass filter (Levels 2 through 128) in EcoStruxure Machine Expert when monitoring slow thermal or tank-level processes near variable frequency drives (VFDs).
  • Shield Termination: Ground analog twisted-pair cable shields at one end only using dedicated TM5 shield-clamping bars to prevent circulating ground currents.

Engineering Field Guide & Selection FAQ

Q: What happens if I connect two non-isolated, ground-referenced sensors at different ground potentials to Channels 1 and 2?

A: Since the TM5SAI4L lacks channel-to-channel isolation, ground potential differences will create circulating current errors and skew measurements across both inputs. Use external loop isolators for grounded field devices.

Q: How does the 4-20 mA wire-break diagnostic behave during normal machine startup?

A: If a 4-20 mA transmitter drops below approximately 3.6 mA during power-up, the module triggers a channel under-range fault bit. Program a short startup timer in your PLC logic to mask alarms until field sensors stabilize.

Q: When should I switch the sampling rate from 1 ms to 300 µs per channel?

A: Select the 300 µs sampling mode for high-speed dynamic applications—such as tension control dancer arms or hydraulic pressure spikes—where fast PID loop updates are critical.

Q: Can I configure Channel 1 for ±10V DC while running 4-20 mA current loops on Channels 2, 3, and 4?

A: Yes. Each channel is independently configured via software parameters and dedicated wiring terminals on the terminal block, allowing mixed voltage and current signals on a single module.

Q: Does the TM5SAI4L include the bus base and front terminal strip in the box?

A: No. Like all Modicon TM5 electronic slices, the TM5SAI4L ships as the core electronic insert; verify that your TM5 bus base and terminal block are intact or order them separately for new panel builds.

Tags

Q: Are these parts 100% original and new?

A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.

Q: How fast is the shipping to my country?

A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.

Q: Can I get a formal quotation with shipping costs?

A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.

Q: Do you offer discounts for bulk orders?

A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.




12-Month Comprehensive Warranty

Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.

  • Coverage: Functional defects and hardware failures under normal operating conditions.
  • Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.

Returns & Exchange Policy

We offer a 30-day return policy to ensure you receive the exact part your system requires.

  • Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
  • RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
  • Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.

Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.