Home STBPDT3100 Schneider Electric Advantys STB 24V DC Power Distribution Module

STBPDT3100 Schneider Electric Advantys STB 24V DC Power Distribution Module

  • Manufacturer: Schneider Electric

  • Product No.: STBPDT3100

  • Condition: In stock

  • Product Type: Power Distribution Module

  • Product Origin: FR

  • Payment: T/T, Western Union

  • Weight: 300g

  • Shipping port: Xiamen

  • Warranty: 12 months

Selected quantity: 1
Request a quote

Estimate delivery times: 12-26 days (International), 3-6 days (United States).

Return within 30 days of purchase. Duties & taxes are non-refundable.

Guaranteed Safe Checkout

Visa
PayPal
Mastercard
American Express

Power Distribution Architecture & Role

System integrators deploy the STBPDT3100 Schneider Electric Advantys STB 24V DC Power Distribution Module (PDM) to establish isolated power segments along distributed I/O islands. By separating 24V DC sensor input power from actuator output power, this module allows engineers to safely de-energize field actuators during emergency stops while keeping diagnostic input sensors powered and online. It mounts onto an STBXBA2200 base and draws zero current from the internal 5V logic bus.

  • Module Identification & Hardware Base:
    • Model Number: STBPDT3100 (Advantys STB Series)
    • Required I/O Base: STBXBA2200 mounting base (18.4 mm width profile)
    • Logic Bus Draw: 0 mA nominal consumption on the 5V island logic power supply
    • Hot-Swap Status: Not supported (power must be removed prior to module extraction)
  • Sensor & Actuator Bus Electrical Ratings:
    • Input Supply Voltage: 24V DC nominal (19.2 to 30V DC allowable operating range)
    • Sensor Input Bus Current: 4 A max at 30 °C; derates linearly to 2.5 A max at 60 °C
    • Actuator Output Bus Current: 8 A max at 30 °C; derates linearly to 5 A max at 60 °C
    • Ground Terminal Surge Capacity: 30 A maximum fault current for up to 2 minutes
  • Integrated Circuit Protection & Enclosure:
    • Overcurrent Fusing: 5 A time-delayed fuse on input bus; 10 A time-delayed fuse on output bus
    • Polarity Safeguard: Built-in reverse polarity protection on the actuator power bus
    • Ingress Protection: IP20 rated modular housing for enclosed cabinet mounting

Technical Specifications Matrix

Circuit Domain Parameter Engineering Rating
Identification Manufacturer & Part Number Schneider Electric STBPDT3100
Voltage Nominal & Allowable Range 24V DC (19.2–30V DC sensor/actuator bus)
Current Capacity Input Bus (Sensor Power) 4 A @ 30 °C / 2.5 A @ 60 °C (5 A time-delayed fuse)
Current Capacity Output Bus (Actuator Power) 8 A @ 30 °C / 5 A @ 60 °C (10 A time-delayed fuse)
Protection Polarity & Grounding Actuator reverse polarity protected; 30 A (2 min) ground rating
Physical Base Footprint & Ingress STBXBA2200 (18.4 mm wide); IP20 protection rating

Field Engineering FAQ

Q1: Why does the STBPDT3100 require a dedicated STBXBA2200 mounting base instead of standard 13.9 mm I/O bases?

A1: The STBXBA2200 base features an 18.4 mm width with heavy-duty internal power bus bars designed to safely carry up to 8 A of actuator current and break the upstream power distribution segment cleanly.

Q2: How do I calculate when to insert an additional PDM along an Advantys STB island?

A2: Sum the total steady-state and inrush currents of all downstream input and output modules. Whenever the combined load approaches 4 A on the input bus or 8 A on the output bus at 30 °C, install a new STBPDT3100 to start a fresh power group.

Q3: Can I replace the internal 5 A and 10 A time-delayed fuses in the field if a short circuit trips them?

A3: Yes, the STBPDT3100 houses user-accessible miniature time-delayed fuses under its front cover. Always isolate the external 24V DC supply and clear the field wiring fault before inserting replacement fuses of identical amperage.

Q4: Why is hot-swapping prohibited on this power distribution module?

A4: Extracting the PDM under full inductive actuator load can cause electrical arcing across the STBXBA2200 backplane contacts, pitting the pins and inducing voltage spikes that disrupt the adjacent 5V logic communication bus.

Q5: How does separating sensor and actuator buses improve machine safety compliance?

A5: By wiring the actuator bus through an external safety relay, an E-Stop event cuts 24V DC power exclusively to solenoid valves and motor starters while keeping the sensor bus active so the PLC retains full visibility of machine state.

Tags

Q: Are these parts 100% original and new?

A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.

Q: How fast is the shipping to my country?

A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.

Q: Can I get a formal quotation with shipping costs?

A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.

Q: Do you offer discounts for bulk orders?

A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.




12-Month Comprehensive Warranty

Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.

  • Coverage: Functional defects and hardware failures under normal operating conditions.
  • Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.

Returns & Exchange Policy

We offer a 30-day return policy to ensure you receive the exact part your system requires.

  • Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
  • RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
  • Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.

Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.