SEC-Z732MGX HORIBA STEC SEC-Z700X 100SLM MFC
Manufacturer: HORIBA
Product No.: SEC-Z732MGX
Condition: In stock
Product Type: Mass Flow Controller
Product Origin: USA
Payment: T/T, Western Union
Weight: 500g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
Engineering Architecture & Performance Profile
The SEC-Z732MGX is a high-precision, pressure-insensitive mass flow controller belonging to HORIBA STEC’s advanced SEC-Z700X series. Engineered for large Chemical Vapor Deposition (CVD) chambers and high-capacity bulk gas delivery panels, this instrument neutralizes upstream pressure transients to deliver flawless flow stability under rigorous industrial operating conditions.
Metrological & Operational Specifications
- Brand & Series
- HORIBA STEC | SEC-Z700X Series
- Exact Model
- SEC-Z732MGX
- Full-Scale Flow Range
- 100 SLM (N2 equivalent, MR/MG #09)
- Accuracy & Linearity
- ±1.0% S.P. (>35% FS); ±0.35% FS (≤35% FS); Linearity ±0.5% FS
- Repeatability & Response Time
- Repeatability ±0.2% FS; Response time ≤1 second (T98 across full flow range)
- Pressure Parameters
- Operating differential: 100–300 kPa(d); Max operating: 450 kPa(g); Pressure resistance: 1000 kPa(g)
- Wetted Materials & Sealing
- SUS316L stainless steel and Co-Ni alloy with electropolished inner finish; metal seals (Leak integrity ≤5×10¹² Pa·m³/s He)
- Electrical & Interface
- Analog 0.1–5 VDC setpoint / 0–5 VDC output; RS-485 F-Net protocol; D-Sub 9-pin and RJ-45 ports
- Physical Dimensions & Power
- 139×70×38 mm (H×W×T), 1/2" VCR fittings, 132 mm fitting distance; Power ±15 VDC ±5% (165 mA)
Pneumatic Integration & Installation Guidelines
- Maintain cleanroom protocols when securing the 1/2" VCR metal seal fittings to prevent particulate contamination.
- Ensure upstream supply pressures maintain a differential pressure window strictly between 100 and 300 kPa(d) for optimal pressure compensation.
- Verify pinout configurations on the D-Sub 9-pin and RJ-45 connectors prior to energizing the unit.
Commissioning, Calibration & Maintenance
- Utilize the RS-485 F-Net digital interface to execute multi-gas profile selections (MR/MG #09) and monitor zero stability.
- Perform periodic helium mass spectrometer leak tests to verify seal integrity in high-cycle gas panels.
- Clean exterior surfaces with approved semiconductor-grade solvents during scheduled maintenance shutdowns.
System Compatibility & Compliance
This unit is fully compatible with modern PLC and DCS architectures supporting RS-485 F-Net protocols or standard analog 0–5 VDC I/O. Built in strict accordance with SEMI standards and RoHS directives, the unheated standard design integrates seamlessly into existing high-flow gas boxes.
Packing List
- One SEC-Z732MGX Mass Flow Controller Unit
- Factory Calibration and Compliance Certificate
- Technical Documentation and Pinout Guide
Procurement & Selection Guidance
- Confirm your maximum gas flow requirements match the 100 SLM full-scale capacity.
- Verify that your gas delivery manifold accommodates 1/2" VCR connection spacing (132 mm fitting distance).
- Specify whether analog or digital F-Net communication aligns with your control infrastructure before requesting a quote.
Advanced Engineering FAQ
Q: How does the integrated pressure sensor inside the SEC-Z732MGX compensate for line pressure drops?
A: The on-board pressure sensor continuously monitors upstream pressure transients and feeds real-time correction data to the piezoelectric actuator, neutralizing flow overshoots during chamber purging cycles.
Q: Why is electropolished SUS316L combined with a Co-Ni alloy utilized for wetted parts?
A: Electropolishing minimizes surface micro-roughness to prevent moisture and impurity entrapment, while the Co-Ni alloy offers exceptional elastic resilience and fatigue resistance for the fast-acting control valve.
Q: Can process engineers switch between different gas types (such as N2, Ar, H2, and He) without breaking vacuum lines?
A: Yes, the multi-gas architecture allows digital switching between pre-calibrated gas curves via the RS-485 interface without requiring physical removal from the VCR manifold.
Q: What occurs if the operating differential pressure drops below the 100 kPa(d) threshold?
A: Operating below 100 kPa(d) restricts the pressure drop required across the control valve, reducing the regulatory authority of the piezo actuator and degrading dynamic flow accuracy.
Q: What diagnostic steps are recommended if zero-point drift is observed during operation?
A: Isolate the gas line using upstream/downstream shutoff valves, verify thermal stabilization within the 15–45°C recommended range, and re-zero the device via the digital or analog control interface.
Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.



