SEC-E531 HORIBA STEC SEC-E500 Solenoid Mass Flow Controller
Manufacturer: HORIBA
Product No.: SEC-E531
Condition: In stock
Product Type: Mass Flow Controller
Product Origin: USA
Payment: T/T, Western Union
Weight: 500g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
Engineering Overview
The HORIBA STEC SEC-E531 operates within the advanced SEC-E500 mass flow controller architecture.
Engineers deploy this high-flow instrument for precise delivery of non-corrosive process gases.
It integrates a rugged solenoid valve mechanism that remains normally closed during power loss.
The core assembly utilizes 3/8-inch Swagelok fittings for secure gas panel integration.
Performance Metrics
- Flow Capacities: Calibrated for 50 SLM or 100 SLM or 150 SLM nitrogen equivalents.
- Measurement Accuracy: Achieves plus-minus 1 percent setpoint for readings above 35 percent full scale.
- Low-End Precision: Maintains plus-minus 0.35 percent full scale when operating at or below 35 percent.
- Dynamic Repeatability: Delivers tight plus-minus 0.5 percent full scale repeatability under stable loads.
- Response Speed: Reaches target flow values in 1.5 seconds across the full operational range.
- Linearity Profile: Confined within plus-minus 0.5 percent full scale linearity limits.
Operating Environment and Pressure Parameters
- Differential Pressure: Requires 200 to 500 kPa differential for nitrogen and 250 to 500 kPa for argon variants.
- Maximum Pressure: Withstands up to 500 kPa gauge operating pressure safely.
- Proof Pressure: Tested to 1 MPa gauge mechanical pressure resistance limits.
- Thermal Bounds: Rated for 5 to 50 degrees Celsius ambient operation with a 15 to 35 degree optimum window.
Materials and Leak Integrity
- Wetted Alloy Construction: Built using 316 and 304 stainless steel along with magnetic stainless components.
- Elastomer Seals: Sealed tightly utilizing premium fluoro rubber and virgin PTFE elements.
- Coating Protection: Features specialized DLC coating on internal moving mechanical parts.
- Helium Leak Rate: Certified leak integrity below 1 times 10 to the negative 9 pascal cubic meters per second.
Electrical Interface and Power Specifications
- Signal Control: Accepts 0.1 to 5 VDC analog setpoint inputs via standard D-Sub connections.
- Feedback Output: Transmits 0 to 5 VDC analog output signals for system monitoring.
- Power Requirements: Powered by dual plus 15 VDC and minus 15 VDC rails drawing 150 milliamps each.
Compliance and Deployment Guidelines
The unit complies with SEMI E56-0309 thermal accuracy assurance protocols.
Leak verification strictly follows SEMI E16-0611 manufacturing compliance standards.
Field technicians must verify gas purity to protect internal PTFE and fluoro rubber components.
Mount the instrument horizontally to minimize gravitational load offsets on internal sensors.
Frequently Asked Questions
Q: How does the SEC-E531 handle pressure drops during high-flow delivery?
A: Maintaining an inlet differential pressure between 200 and 500 kPa ensures the internal solenoid valve operates within stable choked-flow regimes.
Q: What considerations apply when switching gas types from nitrogen to argon?
A: The argon variant demands a slightly higher baseline differential pressure of 250 to 500 kPa due to density variations affecting thermal transfer.
Q: Why does low-range accuracy shift below 35 percent full scale?
A: The controller switches precision algorithms to a fixed percentage of full scale to maintain stability near zero flow boundaries.
Q: Can maintenance personnel field-replace the internal elastomer seals?
A: Factory recalibration is required after any mechanical seal replacement to preserve helium leak integrity certifications.
Q: What prevents electrical signal drift during long industrial runs?
A: Regulating the dual 15 VDC power supply within plus-minus 5 percent tolerance eliminates supply-induced analog feedback variance.
Procurement Guidance
Select your required full-scale flow limit carefully matching your process gas delivery requirements.
Verify D-Sub pinout assignments on your existing control harness before final system wiring.
Contact our engineering sales division today for lead times, custom configurations, and formal quotations.
Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.


