Home PM861AK02 ABB Redundant AC 800M Controller and Baseplate

PM861AK02 ABB Redundant AC 800M Controller and Baseplate

  • Manufacturer: ABB

  • Product No.: PM861AK02

  • Condition: In stock

  • Product Type: Redundant Controller Kit

  • Product Origin: SE

  • Payment: T/T, Western Union

  • Weight: 1200g

  • Shipping port: Xiamen

  • Warranty: 12 months

Selected quantity: 1
Request a quote

Estimate delivery times: 12-26 days (International), 3-6 days (United States).

Return within 30 days of purchase. Duties & taxes are non-refundable.

Guaranteed Safe Checkout

Visa
PayPal
Mastercard
American Express

ABB PM861AK02 | System 800xA AC 800M Controller Kit

The ABB PM861AK02 is a redundant CPU controller kit for ABB System 800xA automation systems. It belongs to the AC 800M controller family. The kit combines two PM861A CPU units with dedicated baseplates and communication accessories.

Each CPU board contains a microprocessor, RAM, real-time clock, LED indicators, and a CompactFlash interface. The controller provides Ethernet and serial communication interfaces. Its architecture supports redundant CPU operation for higher system availability.

The PM861AK02 supports control applications through ABB Control Builder. Its modular architecture also supports distributed I/O expansion and CEX-Bus communication.

Product Identification and Core Specifications

Parameter Specification
Brand ABB
Model PM861AK02
Article Number 3BSE018160R1
Product Family AC 800M
Automation Platform System 800xA
Product Type Redundant CPU Controller Kit
Processor Type MPC860
Clock Frequency 48 MHz
Memory 16 MB
Application RAM 7.155 MB available
Firmware Storage 2 MB Flash PROM
Flash Memory Interface CompactFlash interface
Boolean Operation Performance 1,000 operations in 0.23 ms
Application Cycle Time Down to 1 ms
CPU Redundancy Supported
Maximum Redundancy Switchover Time 10 ms
Power Supply 24 V DC
Supply Voltage Range 19.2–30 V DC
Typical / Maximum Current 250 mA / 430 mA at 24 V DC
Typical / Maximum Power Dissipation 6.0 W / 10.3 W
Dimensions 196 × 119 × 135 mm
Weight 1,200 g
Protection Class IP20

CPU Architecture and Processing Capacity

The PM861A CPU board handles controller processing and application execution. Its MPC860 processor operates at 48 MHz. The controller provides 16 MB of memory and 7.155 MB of application RAM.

Processing Parameter Value
Processor MPC860
Clock Frequency 48 MHz
Memory Capacity 16 MB
Application RAM 7.155 MB
Firmware Flash PROM 2 MB
Boolean Performance 0.23 ms per 1,000 operations
Applications per Controller 32
Programs per Application 64
Diagrams per Application 128
Tasks per Controller 32
Different Cycle Times 32
Minimum Application Cycle Time 1 ms

These specifications help engineers evaluate processing capacity and application structure. Actual performance depends on application complexity and configured control tasks.

Communication Interfaces and Network Connectivity

The controller provides two RJ45 Ethernet ports and two RJ45 serial ports. These interfaces support Control Network communication and service-tool connections.

Interface Technical Details Application
CN1 / CN2 Two Ethernet ports, RJ45, 10 Mbit/s Control Network connection
Ethernet Standard IEEE 802.3 Industrial Ethernet communication
Control Network Protocols MMS and IAC Controller communication
COM3 RS-232C, 75–19,200 baud General serial communication
COM3 Isolation Not optically isolated Includes modem control signals
COM4 RS-232C, 9,600 baud Configuration tool connection
COM4 Isolation Optically isolated Service and configuration access

Network integration considerations:

  • Connect CN1 and CN2 to the designated Control Network infrastructure.
  • Use switched Ethernet for the recommended 100 Mbit/s network backbone.
  • Check the configured network topology before enabling redundant communication.
  • Use COM4 for the supported configuration-tool connection.
  • Check COM3 modem-control requirements before connecting external serial equipment.

The two Ethernet ports provide built-in network connectivity. Confirm the complete redundancy configuration before treating both network paths as independent redundant channels.

CPU Redundancy and System Availability

The PM861AK02 supports CPU redundancy in compatible AC 800M configurations. The redundant architecture covers CPU operation, CEX-Bus, communication interfaces, and S800 I/O.

  • CPU redundancy: Supports controller-level availability through a redundant CPU arrangement.
  • Switchover performance: Maximum specified switchover time is 10 ms.
  • CEX-Bus: Supports up to 12 communication modules.
  • CEX-Bus current: Maximum supply current is 2.4 A.
  • Power monitoring: Includes a redundant power supply status input.
  • Memory backup: Uses a built-in 3.6 V lithium battery.

Redundant configurations require compatible hardware and correct system engineering. Check the applicable ABB redundancy guidelines before installation or expansion.

S800 I/O and ModuleBus Expansion

The controller connects to S800 I/O through the ModuleBus architecture. Supported cluster capacity depends on the CPU configuration.

Parameter Single CPU Redundant CPU
Electrical I/O Clusters 1 0
Optical I/O Clusters 7 7
Maximum I/O Modules 96 84

Additional ModuleBus specifications include:

  • ModuleBus scan rate: 0–100 ms, depending on I/O module quantity.
  • 24 V supply current: Maximum 1.0 A on the electrical ModuleBus.
  • 5 V supply current: Maximum 1.5 A on the electrical ModuleBus.
  • ModuleBus termination: The package includes two TB807 terminators.

Check I/O module quantity, cluster type, and power loading during system expansion. Redundant configurations have a different maximum I/O capacity.

Power Supply and Electrical Requirements

Electrical Parameter Specification
Nominal Supply 24 V DC
Operating Voltage 19.2–30 V DC
Typical Current 250 mA
Maximum Current 430 mA
Typical Power Dissipation 6.0 W
Maximum Power Dissipation 10.3 W
Redundant Supply Status Input Supported
Rated Isolation Voltage 500 V AC
Dielectric Test Voltage 50 V, as listed in supplied data

Verify supply polarity and voltage before energizing the controller. Use the approved system power arrangement. The listed dielectric test value requires confirmation against the applicable ABB datasheet before test planning.

Environmental Conditions and EMC Performance

Environmental Parameter Specification
Operating Temperature +5 to +55 °C
Storage Temperature -40 to +70 °C
Temperature Change 3 °C/min, IEC/EN 61131-2
Maximum Installation Altitude 2,000 m
Pollution Degree Degree 2
Corrosion Protection G3, ISA 71.04
Relative Humidity 5–95%, non-condensing
Acoustic Noise Below 55 dB
Protection Class IP20, EN 60529 / IEC 529
Emission Standard EN 61000-6-4
Immunity Standard EN 61000-6-2

Vibration data supplied for the controller:

  • 10–50 Hz: 0.0375 mm amplitude.
  • 50–150 Hz: 0.5 g acceleration.
  • 5–500 Hz: 0.2 g acceleration.

The supplied vibration ranges overlap and require verification against the original ABB documentation. Confirm the correct test profile before applying vibration qualification criteria.

The controller supports industrial environmental conditions. Its EMC specifications address both emissions and immunity. Maintain proper grounding, cable separation, and cabinet installation practices.

Certifications and Compliance

Certification or Standard Supplied Information
CE Marking Yes
EMC Emission EN 61000-6-4
EMC Immunity EN 61000-6-2
Electrical Safety EN 50178, IEC 61131-2, UL 508
Hazardous Location UL 60079-15
Marine Certificates ABS, BV, DNV-GL, LR, RS, CCS
Environmental Classification Industrial
TÜV Approval Not listed
WEEE Directive 2012/19/EU
RoHS Not specified in supplied data

The supplied marine certification information covers PM861AK01 and PM861AK02. Confirm the exact certificate scope and hardware revision for the intended installation.

Mechanical Data

Parameter Value
Width 196 mm
Height 119 mm
Depth 135 mm
Weight 1,200 g
Baseplate Model TP830
TP830 Baseplate Width 115 mm
Mounting Method DIN rail, slide-and-lock mechanism

Check the cabinet layout before installation. Allow sufficient space for connectors, cables, and maintenance access.

Package Contents | PM861AK02 Controller Kit

Quantity Part Number Description
2 PM861A CPU controller
2 TP830 Baseplate, 115 mm width
2 TB807 ModuleBus terminator
1 TK850 CEX-Bus expansion cable
1 TB851 RCU-Link cable
2 4943013-6 3.6 V lithium backup battery

The listed package provides hardware for a redundant controller arrangement. Confirm the supplied accessories and quantities against the purchase quotation.

Tags

Q: Are these parts 100% original and new?

A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.

Q: How fast is the shipping to my country?

A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.

Q: Can I get a formal quotation with shipping costs?

A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.

Q: Do you offer discounts for bulk orders?

A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.




12-Month Comprehensive Warranty

Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.

  • Coverage: Functional defects and hardware failures under normal operating conditions.
  • Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.

Returns & Exchange Policy

We offer a 30-day return policy to ensure you receive the exact part your system requires.

  • Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
  • RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
  • Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.

Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.