Home NTCS04 Control I/O Termination Hardware | ABB INFI 90 Signal Connection

NTCS04 Control I/O Termination Hardware | ABB INFI 90 Signal Connection

  • Manufacturer: ABB

  • Product No.: NTCS04

  • Condition: In stock

  • Product Type: I/O Termination

  • Product Origin: USA

  • Payment: T/T, Western Union

  • Weight: 500g

  • Shipping port: Xiamen

  • Warranty: 12 months

Selected quantity: 1
Request a quote

Estimate delivery times: 12-26 days (International), 3-6 days (United States).

Return within 30 days of purchase. Duties & taxes are non-refundable.

Guaranteed Safe Checkout

Visa
PayPal
Mastercard
American Express

ABB NTCS04 – INFI 90 Control I/O Termination Unit

The ABB NTCS04 is a Control I/O Termination Unit designed for ABB INFI 90 distributed control systems. It provides termination interfaces for analog and digital field signals, supporting connections between field wiring and the associated control system hardware.

The unit accommodates four analog inputs and three digital inputs. Its output configuration includes two analog outputs and four digital outputs. Supported signal formats include 4–20 mA DC, 1–5 VDC, and 24 VDC digital interfaces, depending on the I/O channel type.

For system engineers, the NTCS04 is primarily an I/O termination and field wiring interface. Its selection requires careful verification of signal type, voltage level, channel allocation, and the corresponding controller configuration. The unit also provides surge protection tested against IEEE-472-1974 Surge Withstand Capability requirements.

01 | I/O Architecture at a Glance

Signal Category Channel Count Signal Specification
Analog inputs 4 4–20 mA DC
Digital inputs 3 24 VDC or 125 VDC
Analog outputs 2 1–5 VDC or 4–20 mA DC
Digital outputs 4 24 VDC isolated open-collector type

Channel planning note: The input and output channels support different electrical signal formats. Confirm each field device's signal type before assigning terminals or preparing the control system configuration.

02 | Analog Signal Interface

Analog input section

  • Number of channels: 4
  • Input signal: 4–20 mA DC

Analog output section

  • Number of channels: 2
  • Supported output signals: 1–5 VDC or 4–20 mA DC

The analog interface supports standard industrial process signals. During commissioning, verify the configured signal type at both ends of each loop. A mismatch between the field device and control system configuration can produce incorrect readings or unexpected output behavior.

03 | Digital Signal Interface

Digital input section

  • Number of channels: 3
  • Supported input voltage: 24 VDC or 125 VDC

Digital output section

  • Number of channels: 4
  • Output type: Isolated open-collector
  • Specified voltage: 24 VDC

The digital input voltage must match the connected field circuit. For digital outputs, engineers should verify the receiving circuit's voltage and load requirements before connecting external equipment. The open-collector output structure should not be treated as a conventional voltage-source output.

04 | Surge Protection & Electrical Reliability

The NTCS04 meets the IEEE-472-1974 Surge Withstand Capability Test requirement specified in the supplied product information.

This surge protection characteristic supports its use in industrial control environments where electrical disturbances may affect field signal wiring. However, it does not replace correct grounding, cable routing, shielding, or external protection measures required by the overall installation design.

05 | Environmental Operating Limits

Environmental Parameter Specification
Ambient temperature 0°C to 70°C (32°F to 158°F)
Relative humidity 0% to 95% up to 70°C, noncondensing
Operating altitude Sea level to 3 km (1.86 miles)
Air quality Noncorrosive environment

Maintain the specified temperature and humidity limits during operation. Avoid condensation and corrosive atmospheres. These environmental conditions are important when installing termination hardware in process control cabinets and field termination panels.

06 | Panel Installation & System Integration

  • Mounting location: Standard INFI 90 field termination panel
  • Panel occupancy: One slot
  • Installation format: Field termination panel mounting

The NTCS04 occupies one slot in a standard INFI 90 field termination panel. Before installation, confirm the available slot and the intended I/O wiring arrangement.

Recommended engineering checks:

  • Confirm the termination unit model against the system drawings and bill of materials.
  • Identify all four analog input channels and verify their 4–20 mA loop assignments.
  • Check whether each digital input circuit uses 24 VDC or 125 VDC.
  • Confirm the selected analog output format before connecting receiving equipment.
  • Verify that digital output loads are compatible with the isolated open-collector interface.
  • Inspect field wiring, terminal identification, and grounding arrangements before energizing the system.
  • Perform point-to-point signal checks after installation and before process startup.

Tags

Q: Are these parts 100% original and new?

A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.

Q: How fast is the shipping to my country?

A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.

Q: Can I get a formal quotation with shipping costs?

A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.

Q: Do you offer discounts for bulk orders?

A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.




12-Month Comprehensive Warranty

Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.

  • Coverage: Functional defects and hardware failures under normal operating conditions.
  • Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.

Returns & Exchange Policy

We offer a 30-day return policy to ensure you receive the exact part your system requires.

  • Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
  • RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
  • Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.

Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.