FC-DR985 AERA Digital MFC Mass Flow Controller FC-DR980 Series
Manufacturer: AERA
Product No.: FC-DR985
Condition: In stock
Product Type: Mass Flow Controller
Product Origin: USA
Payment: T/T, Western Union
Weight: 500g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
Engineering Specification: FC-DR985
Engineered by AERA as an advanced compact variant within the FC-DR980 Series, the FC-DR985 is a high-performance digital mass flow controller. It integrates all-metal sealing, piezoelectric actuation, and multi-gas programmability to deliver precise, drift-resistant gas delivery for semiconductor processing tools, including CVD, PVD, etching, and ion implantation.
Metrology & Flow Control Matrix
Precision thermal-mass metrology paired with dynamic piezoelectric valve actuation enables rapid stabilization and low-drift flow regulation across demanding operating profiles.
| Functional Domain | Performance Parameter | Engineering Specification |
|---|---|---|
| Identification | Brand & Exact Model | AERA FC-DR985 |
| Identification | Product Family & Architecture | FC-DR980 Series (Digital, Piezoelectric, Metal-Sealed) |
| Flow Metrology | Configurable Full-Scale Range | 10 sccm to 5 slm (Multi-gas / multi-range models 1-6, N2 equivalent) |
| Flow Metrology | Calibrated Accuracy | ≤ ±1% S.P. (25–100% FS); ≤ ±0.25% FS (2–25% FS) |
| Flow Metrology | System Repeatability | ≤ ±0.15% FS over operating span |
| Dynamic Response | Settling Time (SEMI E17-91) | ≤ 1.0 second typical across full control range |
| Fluidic Ratings | Operating Differential Pressure | 7 to 40 psiD (49 to 275 kPaD); Max operating pressure 70 psiG |
| Materials & Integrity | Wetted Path & Helium Leak Rate | SUS316L/316 Stainless Steel, PCTFE (5 Ra finish); ≤ 1×10³¹&sup0; atm-cc/sec |
| Electrical & Control | Power Supply & Communication | +15 VDC (100 mA), -15 VDC (40 mA); D-Sub 9 & RS-485 RJ-11 |
| Environmental | Operating Temperature Range | 15°C to 50°C (59°F to 122°F); Zero stability <0.5% FS/year |
Mechanical Mounting & Installation Protocol
- Compact Form Factor: Mount the unit using the standard 79.8 mm port-to-port spacing, ensuring compatibility with tight IGS gas panel layouts.
- Connector Flexibility: Terminate control signals via the top (T) or side pigtail (Y) connector interface depending on cabinet clearance constraints.
- Gas Programming: Upload custom calibration tables supporting up to four distinct process gases with ten points per gas via digital commands.
Preventative Maintenance & Diagnostic Routines
- Leak Integrity Validation: Perform scheduled helium mass spectrometry checks to verify metal seal integrity against the 1×10³¹¹ Pa-m³/sec threshold.
- Zero Drift Audit: Verify zero-point stability annually against the <0.5% FS per year benchmark under locked-valve conditions.
- Inline Filtration: Ensure high-purity upstream gas filtration to prevent particulate accumulation on the piezoelectric valve seat.
Application Engineering & System Compatibility
- Process Integration: Purpose-built for semiconductor fabrication tools requiring high-density integration in sputtering, CVD, and diffusion systems.
- Control Versatility: Supports both analog 0–5 VDC loops and digital RS-485 multi-drop networking protocols for automated fab environments.
Hardware Delivery Scope
- 1 × AERA FC-DR985 Digital Mass Flow Controller
- 1 × Factory Calibration and Compliance Documentation
Engineering Selection Guidelines
- Valve Fail-Safe Selection: Choose between normally-open (NO) or normally-closed (NC) piezoelectric actuator configurations based on your tool's safety interlock requirements.
- Range Scaling: Verify that your process operating pressures fall within the 7 to 40 psiD differential window to ensure linear control across the 2% to 100% turndown span.
Advanced Technical FAQ
-
Q: How does the piezoelectric actuator in the FC-DR985 differ from traditional thermal solenoid valves during fast recipe steps?
A: The piezoelectric stack provides direct mechanical displacement with virtually zero thermal hysteresis, achieving a settling time of ≤1.0 second without overshoot during rapid gas switching.
-
Q: What field calibration steps are required when switching the FC-DR985 from Nitrogen to a reactive process gas like Silane?
A: You can access the internal multi-gas memory via the RS-485 interface to load pre-calculated conversion factors and multi-point calibration tables without removing the unit from the gas box.
-
Q: Why does maintaining the differential pressure between 7 and 40 psiD critically impact controller linearity?
A: Operating below 7 psiD starves the laminar flow element, causing measurement compression at high flow rates, while exceeding 40 psiD can introduce sonic choking across the valve orifice.
-
Q: What precautions should technicians observe when handling the unit's metal-sealed VCR connections during maintenance?
A: Always replace the nickel or stainless steel gasket on every make-break cycle, and use backup wrenches to prevent twisting the internal manifold tubing.
-
Q: How does the dual RJ-11 port architecture streamline multi-drop networking on crowded gas racks?
A: The dual RJ-11 ports enable straightforward daisy-chaining of RS-485 half-duplex communication lines between adjacent controllers, minimizing wiring harness congestion in narrow panels.
Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.



