CM577-ETH Industrial Dual-Port PLC Interface | ABB AC500
Manufacturer: ABB
Product No.: CM577-ETH
Condition: In stock
Product Type: Interface Module
Product Origin: SE
Payment: T/T, Western Union
Weight: 500g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
Industrial Network Interface & Protocol Architecture
The CM577-ETH (Order Code: 1SAP170700R0001) is a high-performance Ethernet communication coupler built for the ABB AC500 programmable logic controller platform. Driven by an internal EC1 processor and 8 kByte dual-port RAM, this module equips PM57x, PM58x, and PM59x CPUs with deterministic Ethernet TCP/IP, UDP/IP, and dual-role Modbus TCP (Master/Slave) connectivity. An integrated 2-port unmanaged switch enables daisy-chain line topologies directly at the control cabinet without external switching hardware.
Hardware, Memory & Environmental Matrix
| Subsystem Category | Technical Parameter | Engineering Specification |
|---|---|---|
| Identification & Platform | Manufacturer & Series | ABB — AC500 PLC System |
| Model & Part Number | CM577-ETH (1SAP170700R0001) | |
| Compatible CPUs & Bases | PM57x, PM58x, PM59x CPUs; All TB5xx Terminal Bases | |
| Network & Switch Specs | Fieldbus Interface | 2 × RJ45 Sockets (10/100 Base-TX, Integrated 2-Port Switch) |
| Transmission & Duplex | 10 or 100 Mbit/s (Adjustable); Half/Full-Duplex; Auto-Negotiation | |
| Supported Protocols | Ethernet TCP/IP, UDP/IP, Modbus TCP (Master & Slave) | |
| Frame Types & Addressing | Ethernet II (RFC 894), IEEE 802.3 RX (RFC 1042); Rotary Switch (00..FFhex) | |
| Processing & Memory | On-Board Processor | EC1 Communication Processor |
| Internal & Dual-Port RAM | 256 kByte Internal RAM (EC1); 8 kByte Dual-Port Memory | |
| External Memory | 2 × 128 kByte RAM (Webserver); 512 kByte Firmware Flash + 2 MByte Web Flash | |
| Power & Diagnostics | Power Supply & Draw | Via Terminal Base Bus; Typ. 65 mA at 24 V DC terminal base (420 mA bus load) |
| LED State Indicators | 5 Status LEDs (PWR, RDY, RUN, STA, ERR) + 2 × LINK, 2 × ACT | |
| Mechanical & Environmental | Dimensions & Weight | 28 mm (W) × 135 mm (H) × 62 mm (D); Approx. 120 g – 150 g |
| Operating Temperature | 0°C to +60°C (Horizontal Mounting); XC variant (1SAP370700R0001) -40°C to +70°C | |
| Vibration & Shock | EN 61131-2: 2–15 Hz (3.5 mm), 15–150 Hz (1 g); Shock: 15 g, 11 ms half-sine | |
| Mounting & Protection | 35 mm DIN Rail (EN 50022) or 4 mm Screws (1.2 Nm torque); IP20, UL 94 Housing |
Cabinet Installation & Commissioning Protocol
- Mount the compatible TB5xx terminal base horizontally onto a 35 mm DIN rail (7.5 mm or 15 mm depth) or fasten directly to the backplate using M4 screws tightened to 1.2 Nm.
- Dial the hexadecimal rotary switches (00 to FFhex) on the module face to assign a unique hardware station identifier prior to seating the unit.
- Snap the CM577-ETH firmly onto the terminal base communication coupler slot until the locking mechanism engages.
- Connect shielded CAT5e/CAT6 patch cables to the dual RJ45 ports and confirm green LINK/ACT LED illumination alongside solid PWR and RDY status indicators.
System Selection & Environment Notes
- Verify control cabinet thermal profiles: select the standard 1SAP170700R0001 for standard indoor cabinets (0°C to +60°C) or specify the conformal-coated XC version (1SAP370700R0001) for harsh corrosive gases, salt mist, or sub-zero installations down to -40°C.
- Confirm horizontal rack orientation is maintained across the AC500 backplane to satisfy convection cooling and EN 61131-2 vibration ratings.
Control Engineering FAQ
Q: How does the integrated 2-port switch on the CM577-ETH simplify multi-drop PLC cabinet wiring?
A: The built-in 10/100 Base-TX switch internally bridges both RJ45 sockets, allowing engineers to daisy-chain neighboring AC500 racks, HMIs, or remote I/O islands in a linear topology without consuming extra ports on an external industrial Ethernet switch.
Q: What role does the 8 kByte dual-port memory play during high-speed Modbus TCP polling?
A: Dual-port RAM acts as an asynchronous hardware buffer between the EC1 communication processor and the main AC500 CPU, enabling deterministic data exchange without stalling main PLC scan cycles during heavy TCP/IP traffic bursts.
Q: Can technicians lock port speed and duplex settings instead of relying on auto-negotiation?
A: Yes. While auto-negotiation is active by default, engineers can manually force 10 Mbit/s or 100 Mbit/s and half/full-duplex modes within the Automation Builder hardware configuration to prevent duplex mismatches with legacy managed switches.
Q: What diagnostic checks resolve a flashing ERR LED during initial network commissioning?
A: Inspect the rotary station switches (00..FFhex) to verify they match the slot address configured in the project tree, check for duplicate IP assignments on the subnet, and confirm the module is seated squarely on a TB5xx terminal base.
Q: When is it necessary to upgrade from the standard 1SAP170700R0001 to the XC variant?
A: Transition to the XC version whenever ambient temperatures fall below 0°C or exceed +60°C, or when deploying panels in marine, wastewater, or petrochemical environments containing H2S and corrosive airborne contaminants.
Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.



