Bently Nevada 330905-05-10-10-02-00 3300 NSv Proximity Probe
Manufacturer: Bently Nevada
Product No.: 330905-05-10-10-02-00
Condition： In stock
Product Type: 3300 XL Probe
Product Origin: USA
Payment: T/T, Western Union
Weight: 323g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
Product Overview
Brand: Bently Nevada
Model: 330905-05-10-10-02-00
Series: 3300 NSv Proximity Probe
Condition: New and original in factory packing
Availability: In stock for 24-48 hour dispatch via FedEx, UPS, and DHL
Warranty: 12-month factory warranty included
Global PLC Spare HUB's Insight: When engineers monitor high-vibration machinery with tight clearances, standard probes often run out of linear range. The 3300 NSv series solves this challenge by delivering precise axial position and vibration measurements on small targets down to 8.9 mm, ensuring reliable data capture in demanding process compressors.
Comprehensive Technical Specifications
Brand: Bently Nevada
Model: 330905-05-10-10-02-00
Series: 3300 NSv Proximity Probe
Measurement Range: Linear range from 0.25 to 1.75 mm (10 to 70 mils)
Frequency Response: 0 to 10 kHz with plus zero, minus 3 dB typical
Sensitivity: Incremental Scale Factor of 7.87 V/mm (200 mV/mil)
Linearity: Deviation from best fit straight line less than plus or minus 0.06 mm
Resolution: High precision output for sub-micron vibration detection
Temperature Range: Minus 52 degrees Celsius to plus 177 degrees Celsius
Environmental Tolerance: PPS probe tip and AISI 304 stainless steel case with Viton O-ring seal
Interference Immunity: 75 Ohm coaxial FEP insulated cable with miniature coaxial ClickLoc connector
Installation Guidelines
Mount probe using M10X1 thread configuration with maximum 15 mm thread engagement.
Apply recommended probe case torque of 7.5 N meters for secure seating.
Maintain minimum bend radius of 25.4 mm for probe and extension cables.
Use three-conductor shielded triad field wiring up to 305 meters in length.
Set initial probe gap to recommended 1.0 mm distance from target surface.
Commissioning and Maintenance Convenience
Connect directly to 3300 XL NSv Proximitor Sensor without complex field calibration.
Verify dc resistance of 4.2 ohms from center conductor to outer conductor.
Inspect miniature coaxial ClickLoc connector for secure mechanical latching.
Replace O-ring seals during major turbine overhauls to maintain pressure integrity.
Compatibility and Interchangeability
Mechanically and electrically interchangeable with older 3300 RAM proximity probes.
Fully compatible with 3300 XL NSv Proximitor Sensors and standard monitoring systems.
Superior side-view characteristics compared to legacy 3000-series 190 probes.
Certifications and Compliance
Agency Approval Option: None required for standard industrial installations.
Designed to meet international industrial safety and electrical standards.
Manufactured under strict quality control processes for hazardous and safe areas.
Package Contents and Warranty Terms
One 330905-05-10-10-02-00 Proximity Probe in factory packing.
Standard manufacturer documentation and calibration data sheet.
Backed by a full 12-month factory warranty from date of purchase.
Fast dispatch within 24 to 48 hours via FedEx, UPS, or DHL.
Typical Application Scenarios and Diagnostic Capabilities
Process compressor monitoring in oil and gas refineries.
Radial and axial vibration measurement on steam and gas turbines.
Shaft position tracking on machinery with restricted target diameters.
Early detection of rotor unbalance, misalignment, and bearing wear.
Global PLC Spare HUB Review: In a recent deployment at a high-pressure synthesis gas compressor plant, maintenance teams used the 3300 NSv probe to monitor axial position where space constraints prevented standard probe installation. The superior side-view performance eliminated false trip signals caused by shaft runout near shoulders.
Frequently Asked Questions
Q: What target size is required for accurate readings?
A: Minimum target diameter is 8.9 mm, with 13 mm recommended for optimal scale factor stability.
Q: Can this probe replace legacy 3300 RAM models?
A: Yes, it is fully interchangeable and offers improved chemical resistance.
Q: What is the maximum field wiring length allowed?
A: Up to 305 meters between the sensor and monitor using shielded triad cable.
Q: How should the probe be torqued during installation?
A: Apply finger tight seating followed by a maximum torque of 0.56 N meters on the tip or 7.5 N meters on the case threads.
Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.
People Also Bought
