Bently Nevada 330903-00-04-10-11-05 3300 NSv Proximity Probe Sensor
Manufacturer: Bently Nevada
Product No.: 330903-00-04-10-11-05
Condition: In stock
Product Type: Proximity Probe
Product Origin: USA
Payment: T/T, Western Union
Weight: 300g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
Product Overview
The Bently Nevada 330903-00-04-10-11-05 is a narrow-side-view eddy current transducer from the 3300 NSv Proximity Probe series. Engineers deploy this M8x1 threaded sensor in tight installation spaces where standard probes fail. It delivers accurate radial vibration and axial thrust measurements on small shafts and restricted side-view clearances.
This specific 330903 configuration features a 40 mm overall case length and zero unthreaded section. A 1.0-meter FluidLoc coaxial cable prevents oil or process liquids from leaking through the cable interior. Its Polyphenylene Sulfide (PPS) probe tip resists harsh chemicals, making it ideal for centrifugal air and process compressors.
Technical Specifications
| Manufacturer | Bently Nevada |
| Part Number | 330903-00-04-10-11-05 |
| Product Series | 3300 NSv Proximity Transducer System |
| Linear Measurement Range | 1.5 mm (60 mils), spanning 0.25 to 1.75 mm (10 to 70 mils) |
| Recommended Gap Setting | 1.0 mm (40 mils) (approx. -1 to -13 Vdc output span) |
| Incremental Scale Factor (Sensitivity) | 7.87 V/mm (200 mV/mil) (+12.5% / -20% including interchangeability error) |
| Linearity (DSL) | Less than ±0.06 mm (±2.3 mils) deviation from best fit straight line |
| Frequency Response | 0 to 10 kHz (+0, -3 dB typical with up to 305 m field wiring) |
| Probe DC Resistance | 4.2 ± 0.5 Ω (center conductor to outer conductor) |
| Operating & Storage Temperature | -52°C to +177°C (-62°F to +351°F) |
| Environmental & Pressure Sealing | Viton O-ring differential pressure seal; FluidLoc oil-blocking FEP cable |
| Noise & Interference Immunity | 75 Ω coaxial shielded cable; supports shielded triad field wiring up to 305 m (1,000 ft) |
| Physical Case Dimensions | M8x1 thread, 0 mm unthreaded length, 40 mm overall case length |
| Construction Materials | PPS probe tip; AISI 304 stainless steel probe case |
| Total Cable & Connector | 1.0 meter (39 in) total length; miniature coaxial ClickLoc connector with protector |
Installation Guidelines
- Target Geometry: Ensure a minimum flat target diameter of 8.9 mm (0.35 in), though engineers recommend 13 mm (0.5 in).
- Thread Engagement: Limit probe case thread engagement to a maximum length of 12 mm.
- Case Torque Limits: Tighten the M8x1 probe case to a recommended 5.1 N•m (45 in•lb), never exceeding 7.3 N•m (65 in•lb).
- Connector Torque: Fasten the miniature ClickLoc connector finger-tight, staying strictly below the 0.56 N•m (5 in•lb) maximum limit.
- Cable Routing: Maintain a minimum cable bend radius of 25.4 mm (1.0 in) to prevent internal coaxial conductor damage.
- Field Wiring: Connect the Proximitor sensor to the monitor using 0.2 to 1.5 mm² (16 to 24 AWG) three-conductor shielded triad cable.
Commissioning & Maintenance Convenience
- Secure Interconnects: The gold-plated ClickLoc connector locks firmly with an audible click, preventing loosening under heavy machine vibration.
- Moisture Protection: The integrated connector protector shields the coaxial junction against high humidity and harsh process liquids.
- Zero-Calibration Swap: Factory-matched electrical tolerances allow direct field replacement without bench recalibration of the 3300 XL NSv Proximitor.
- Quick Health Verification: Technicians verify coil integrity on-site by measuring 4.2 ± 0.5 Ω across the probe connector pins.
System Compatibility
- Direct Legacy Upgrade: The 3300 NSv probe mechanically and electrically replaces legacy Bently Nevada 3300 RAM proximity probes and extension cables.
- Superior Side-View Clearance: It outperforms the 3000-series 190 probe in narrow counterbores at identical target gap distances.
- System Matching: Pair this 1.0-meter probe with an 8.0-meter 3300 NSv extension cable to match a 9.0-meter Proximitor system.
Certifications & Packaging List
- Agency Approvals (Option -05): Carries multiple hazardous area certifications, including CSA, ATEX, and IECEx approvals.
- Factory Condition: Supplied New & Original in Factory Packing with a full 12-Month Warranty.
- Included Items: One 330903-00-04-10-11-05 proximity probe, pre-installed connector protector, factory test documentation, and protective tip cap.
Selection & Ordering Guide
Verify your mechanical mounting dimensions and system electrical length before ordering 330903 probes:
- Thread & Armor (330903): Standard M8x1 metric thread without stainless steel armor. Choose model 330904 if you require external armor.
- Case Length (-00-04): Features 00 mm unthreaded length and 40 mm overall case length. Ensure your mounting bracket accommodates a 40 mm body.
- Total System Length (-10): Specifies a 1.0-meter integral probe cable. Combine this with a matching extension cable to equal your Proximitor's 5.0 m or 9.0 m rating.
- Cable & Connector (-11): Includes FluidLoc oil-seal cable and a ClickLoc connector with protector for wet or pressurized bearing housings.
Frequently Asked Questions (FAQ)
Q: Can I use this 3300 NSv probe to replace an older 3300 RAM probe?
A: Yes. The 3300 NSv probe offers full mechanical and electrical interchangeability with legacy 3300 RAM components while providing superior chemical resistance.
Q: How does measuring a shaft smaller than 13 mm affect sensor performance?
A: Targets below 13 mm (0.5 in) reduce the Incremental Scale Factor. Engineers compensate for this shift by setting a slightly tighter initial gap than 1.0 mm.
Q: Does the factory pressure-test the Viton O-ring seal before shipping?
A: No. While the Viton O-ring seals differential pressure between the tip and case, Bently Nevada does not individually pressure-test standard stock probes.
Q: What happens if my field wiring exceeds 305 meters (1,000 feet)?
A: Exceeding 305 meters causes high-frequency signal rolloff below 10 kHz due to increased cable capacitance. Keep triad runs within 305 meters for full bandwidth.
Q: Why is the FluidLoc cable option critical in compressor applications?
A: FluidLoc cable contains a specialized internal blocker that stops pressurized synthetic oils or process gases from wicking through the cable jacket into junction boxes.

Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.



