Home ABB AI820-eA 3BSE008544R2 S800 I/O Differential Input Module

ABB AI820-eA 3BSE008544R2 S800 I/O Differential Input Module

  • Manufacturer: ABB

  • Product No.: 3BSE008544R2

  • Condition: In stock

  • Product Type: Differential Input Module

  • Product Origin: SE

  • Payment: T/T, Western Union

  • Weight: 500g

  • Shipping port: Xiamen

  • Warranty: 12 months

Selected quantity: 1
Request a quote

Estimate delivery times: 12-26 days (International), 3-6 days (United States).

Return within 30 days of purchase. Duties & taxes are non-refundable.

Guaranteed Safe Checkout

Visa
PayPal
Mastercard
American Express

Product Overview

The ABB 3BSE008544R2 (AI820 / AI820-eA) operates as a 4-channel differential analog input module within the ABB S800 I/O distributed process architecture. Engineers deploy this high-density interface to acquire bipolar and unipolar current or voltage signals from field transmitters. Individual galvanic channel isolation prevents ground loops and protects upstream controller backplanes against field-side voltage surges.

The module supports simultaneous HART protocol pass-through, enabling direct digital asset management and smart transmitter diagnostics. Built-in 14-bit plus sign analog-to-digital conversion delivers precise signal telemetry across harsh industrial automation environments.

Technical Specifications

Parameter Category Specification Details
Manufacturer ABB
Model & Part Number 3BSE008544R2 / AI820 / AI820-eA
System Series ABB S800 I/O Distributed Modular Process I/O
Channel Configuration 4 differential input channels, 0 output channels
Current Measurement Ranges -20 to +20 mA, 0 to 20 mA, 4 to 20 mA
Voltage Measurement Ranges -10 to +10 V, 0 to 10 V, 2 to 10 V, -5 to +5 V, 0 to 5 V, 1 to 5 V DC
Resolution & Sensitivity 14-bit plus sign (15-bit effective dynamic resolution across full scale)
Input Impedance (Current) 250 Ω precision shunt resistor per channel
Linearity & Accuracy High-linearity differential front-end with factory-calibrated gain and offset stability
Frequency Response & Filtering Integrated low-pass input filtering for 50/60 Hz mains hum rejection
Isolation & Interference Immunity Individual channel-to-channel and channel-to-bus galvanic isolation; 50 V Common Mode Voltage (CMV)
Digital Fieldbus Protocol HART communication pass-through supported on all channels
Operating Temperature Range 0 °C to +55 °C (+32 °F to +131 °F) standard industrial cabinet rating
Environmental Tolerance 5% to 95% non-condensing relative humidity; IP20 ingress protection
Net Weight 0.28 kg (0.62 lbs)

System Compatibility & Certifications

  • Control Platforms: Integrates directly with ABB System 800xA, Advant OCS, and Compact Product Suite controllers.
  • Compatible Module Termination Units (MTUs): TU810, TU812, TU814, TU830, and TU833.
  • Industrial Certifications: Complies with CE, UL, CSA, and marine classification standards for process automation installations.

Installation, Commissioning & Maintenance

  • Mechanical Mounting: Slide the AI820 module onto a pre-wired DIN-rail S800 MTU until the mechanical latch locks securely.
  • Keying Protection: Set the mechanical key code on the MTU base to prevent accidental insertion of mismatched I/O modules.
  • Hot-Swap Capability: Replace modules online without powering down the ModuleBus or interrupting adjacent S800 I/O stations.
  • Front-Panel Diagnostics: Monitor green Run, red Fault, and yellow Warning LEDs for instant channel health verification during commissioning.

Package Contents

  • 1 × ABB 3BSE008544R2 (AI820-eA) 4-Channel Analog Input Module
  • 1 × Factory Technical Data & Safety Instruction Sheet
  • Protective anti-static industrial packaging

Frequently Asked Questions (FAQ)

Q1: How do I select between a compact MTU and an extended MTU for the ABB AI820?

A1: Choose TU810 or TU812 for high-density cabinets where external marshalling terminals handle field loop power. Select TU830 or TU833 when you need dedicated three-wire transmitter power distribution terminals directly on the base unit.

Q2: Can the AI820-eA read mixed voltage and current signals across its four channels simultaneously?

A2: Yes, engineers configure each of the four differential channels independently inside the Control Builder software. Connect current loops to the 250 Ω shunt terminals and voltage sensors directly to the high-impedance voltage inputs.

Q3: What causes a channel fault LED to illuminate during initial loop commissioning?

A3: A red fault indicator typically signals an open 4–20 mA wire break, over-range input current exceeding 20 mA, or missing loop power. Verify field transmitter polarity and confirm that the MTU terminal screws are torqued properly.

Q4: Does the 50 V Common Mode Voltage rating protect against ground potential differences between remote buildings?

A4: The 50 V CMV isolation handles typical local plant ground offsets and induced electrical noise between sensor grounds. For severe surge environments or inter-building runs exceeding 50 V, install external galvanic signal isolators upstream of the AI820.

Q5: What is the difference between standard AI820 and the AI820-eA variant?

A5: The AI820-eA (3BSE008544R2) features conformal coating on its printed circuit boards for enhanced corrosion resistance. It serves as a direct form-fit-function upgrade for harsh G3-classified chemical, pulp, and marine environments.

Tags

Q: Are these parts 100% original and new?

A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.

Q: How fast is the shipping to my country?

A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.

Q: Can I get a formal quotation with shipping costs?

A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.

Q: Do you offer discounts for bulk orders?

A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.




12-Month Comprehensive Warranty

Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.

  • Coverage: Functional defects and hardware failures under normal operating conditions.
  • Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.

Returns & Exchange Policy

We offer a 30-day return policy to ensure you receive the exact part your system requires.

  • Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
  • RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
  • Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.

Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.