Home 991-25-50-02-01 Bently Nevada 991 Series Thrust Position Transmitter 4-20mA

991-25-50-02-01 Bently Nevada 991 Series Thrust Position Transmitter 4-20mA

  • Manufacturer: Bently Nevada

  • Product No.: 991-25-50-02-01

  • Condition: In stock

  • Product Type: Thrust Transmitter

  • Product Origin: USA

  • Payment: T/T, Western Union

  • Weight: 430g

  • Shipping port: Xiamen

  • Warranty: 12 months

Selected quantity: 1
Request a quote

Estimate delivery times: 12-26 days (International), 3-6 days (United States).

Return within 30 days of purchase. Duties & taxes are non-refundable.

Guaranteed Safe Checkout

Visa
PayPal
Mastercard
American Express

01 | Instrument Overview

The Bently Nevada 991-25-50-02-01 is a 991 Series thrust position transmitter for axial machinery monitoring.

It converts displacement measurements from a compatible 3300 NSv Proximity Probe system into a standardized 4–20 mA output.

The transmitter accepts one non-contacting proximity probe and its extension cable. It provides a two-wire current-loop signal for connection to PLC, DCS, and machinery monitoring systems.

This configuration includes a 25-0-25 mil full-scale option, a 5.0 m system length, bulkhead screw mounting, and CSA Division 2 approval.

02 | Technical Specification Matrix

Manufacturer Bently Nevada
Model 991-25-50-02-01
Product Series 991 Series
Product Type Thrust Position Transmitter
Manufacturing Origin Made in U.S.A.
Measurement Direction Axial
Full-Scale Option 25-0-25 mils
System Length 5.0 m (16.4 ft)
Mounting Option Bulkhead Screws
Installation Type DIN Rail
Input Sensor One 3300 NSv Non-Contacting Proximity Probe
Output Signal 4–20 mA DC
Output Configuration Two-Wire Current Loop
Power Supply +12 to +35 VDC at transmitter terminals
Prox Output Linear Range 0.25 to 1.65 mm
Full-Scale Current-Loop Range 0.6-0-0.6 mm or 25-0-25 mils
Typical Loop Accuracy ±1.5% of specified full scale
Maximum Loop Resistance 1,000 Ω, including cable, at 35 VDC
Current Limiting 23 mA Typical
Transmitter Operating Temperature -35°C to +85°C (-31°F to +185°F)
Storage Temperature -51°C to +100°C (-60°F to +212°F)
Transmitter Weight 0.43 kg (0.9 lb)

03 | Ordering Code Architecture

Each suffix identifies a specific measurement, installation, or approval configuration.

Code Segment Selected Option Configuration Meaning
991 Base Model Thrust Position Transmitter
-25 Full-Scale Option 25-0-25 mils
-50 System Length 5.0 m (16.4 ft)
-02 Mounting Option Bulkhead Screws
-01 Agency Approval CSA Division 2

Complete Configuration Summary

  • Transmitter: 991 Thrust Position Transmitter.
  • Measurement Range: 25-0-25 mils.
  • System Cable Length: 5.0 m.
  • Mechanical Mounting: Bulkhead screws.
  • Approval Selection: CSA Division 2.
  • Signal Interface: Two-wire 4–20 mA DC.

04 | Measurement Principle and Signal Processing

The transmitter receives displacement information from a compatible 3300 NSv proximity measurement system. It converts the measurement into a proportional current-loop signal.

Signal Condition Output Behavior
Minimum Full-Scale Position 4 mA
Midpoint Reference 12 mA
Maximum Full-Scale Position 20 mA
Not OK Condition Below 3.6 mA within 100 μs
Signal Recovery Within 0.1 seconds after fault removal

Signal Interpretation: The 4–20 mA output represents the configured axial measurement range. The receiving controller must use the correct engineering-unit scaling.

The transmitter also provides a Not OK/Signal Defeat function. It drives the output below 3.6 mA when a Not OK condition occurs.

05 | Electrical Performance and Loop Design

Power Supply Requirements

  • Required input: +12 to +35 VDC.
  • Measure supply voltage at the transmitter terminals.
  • Maintain sufficient voltage for the complete current-loop load.

Current-Loop Characteristics

  • Output: 4–20 mA DC.
  • Accuracy: Typically within ±1.5% of specified full scale.
  • Maximum Loop Resistance: 1,000 Ω, including cable, at 35 VDC.
  • Current Limiting: Approximately 23 mA.
  • Zero Adjustment: External adjustment.
  • Span Adjustment: External adjustment.
  • Adjustment Interaction: Zero and span adjustments operate independently.

Accuracy Test Reference: The specified accuracy uses the TEST signal input and voltage measurement across a 250 Ω loop resistance.

When designing the receiving circuit, calculate the total loop resistance. Include input resistance, cable resistance, and other series-connected loads.

Tags

Q: Are these parts 100% original and new?

A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.

Q: How fast is the shipping to my country?

A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.

Q: Can I get a formal quotation with shipping costs?

A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.

Q: Do you offer discounts for bulk orders?

A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.




12-Month Comprehensive Warranty

Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.

  • Coverage: Functional defects and hardware failures under normal operating conditions.
  • Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.

Returns & Exchange Policy

We offer a 30-day return policy to ensure you receive the exact part your system requires.

  • Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
  • RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
  • Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.

Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.