9200-09-01-02-01 Bently Nevada Seismoprobe Velocity Transducer
Manufacturer: Bently Nevada
Product No.: 9200-09-01-02-01
Condition: In stock
Product Type: Velocity Seismoprobe Transducer
Product Origin: USA
Payment: T/T, Western Union
Weight: 300g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
Product Overview | Two-Wire Velocity Sensing Technology
The Bently Nevada 9200-09-01-02-01 is a Two-Wire Velocity Seismoprobe Transducer for industrial machinery vibration monitoring.
This transducer converts casing vibration velocity into an electrical signal. Its two-wire configuration supports connection to compatible vibration monitoring circuits.
The sensor provides a nominal sensitivity of 20 mV/mm/s (500 mV/in/s), ±5%. Its specified minimum operating frequency is 15 Hz (900 cpm). These characteristics support machinery vibration measurement where velocity monitoring is required.
The selected configuration includes a top-mounted connector without an integral cable. Its circular mounting base uses a 1/4-28 UNF stud. The specified mounting orientation is 0° ±180°.
The housing uses anodized A204 aluminum. A neoprene gasket provides the specified sealing interface. The CSA approval option supports installations requiring the applicable certification.
Key Engineering Features
- Measurement Type: Two-wire vibration velocity transducer.
- Nominal Sensitivity: 20 mV/mm/s, ±5%.
- Minimum Operating Frequency: 15 Hz (900 cpm).
- Velocity Range: 25 mm/s (1 in/s) under specified test conditions.
- Connector Configuration: Top mount, without integral cable.
- Mounting Interface: Circular base with 1/4-28 UNF stud.
- Agency Approval Option: CSA.
- Housing Material: Anodized A204 aluminum.
- Factory Warranty: 12 months.
Ordering Code Architecture | Configuration Breakdown
The complete ordering number identifies the transducer type, mounting orientation, connector arrangement, mounting base, and agency approval.
| Code Segment | Configuration | Technical Meaning |
|---|---|---|
| 9200 | Base Model | Two-Wire Transducer |
| -09 | Mounting Angle / Minimum Frequency | 0° ±180°, 15 Hz (900 cpm) |
| -01 | Connector Option | Top mount, no cable |
| -02 | Mounting Base Option | Circular base, 1/4-28 UNF stud |
| -01 | Agency Approval | CSA |
Configuration Identification Tree
-
9200 — Two-Wire Transducer
-
Mounting Angle / Frequency: -09
- Specified orientation: 0° ±180°.
- Minimum operating frequency: 15 Hz.
-
Connector Arrangement: -01
- Top-mounted connector.
- No integral cable.
-
Mounting Base: -02
- Circular mounting base.
- 1/4-28 UNF stud.
-
Agency Approval: -01
- CSA approval option.
-
Mounting Angle / Frequency: -09
Ordering Verification: Match every suffix against the existing installation. Pay particular attention to connector orientation and mounting-base configuration.
Technical Data | Electrical Measurement Performance
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number | 9200-09-01-02-01 |
| Base Model | 9200 |
| Product Series | Seismoprobe |
| Product Type | Two-Wire Velocity Seismoprobe Transducer |
| Measurement Principle | Velocity transduction |
| Nominal Sensitivity | 20 mV/mm/s (500 mV/in/s), ±5% |
| Minimum Operating Frequency | 15 Hz (900 cpm) |
| Calibration Load | 10 kΩ between terminals A and B |
| Output Measurement | Across pins A and B |
| Sensitivity Temperature Coefficient | 0.2%/°C |
| Dynamic Operating Range | 2.54 mm (0.100 in) peak-to-peak maximum displacement |
| Velocity Range | 25 mm/s (1 in/s) |
| Velocity Test Conditions | +22°C, 100 Hz casing vibration, 10 kΩ load |
| Coil Resistance | 1.25 kΩ ±5% |
| Locked-Coil Inductance | 125 mH typical |
Measurement Note: The sensitivity specification requires proper termination and orientation at the calibration angle. The 25 mm/s velocity range also uses specific test conditions.
Mechanical Construction | Housing and Mounting Interface
| Parameter | Specification |
|---|---|
| Mounting Orientation | 0° ±180° |
| Connector Position | Top mount |
| Integral Cable | Not included |
| Mounting Base | Circular |
| Mounting Stud | 1/4-28 UNF |
| Case Material | Anodized A204 aluminum |
| Gasket Material | Neoprene |
| Typical Height | 102 mm (4 in), depending on connector option |
| Typical Diameter | 41 mm (1.6 in) |
| Typical Weight | 300 g (10.5 oz) |
The circular base provides a defined mounting interface. The 1/4-28 UNF stud determines the mechanical connection requirements.
The top-mounted connector simplifies access from above the mounting position. The no-cable configuration requires a compatible external connection arrangement.
Environmental Specifications | Operating Conditions
| Environmental Parameter | 9200 Specification |
|---|---|
| Operating Temperature | -29°C to +121°C (-20°F to +250°F) |
| Storage Temperature | -29°C to +121°C (-20°F to +250°F) |
| Relative Humidity | Up to 95%, noncondensing |
| Integral Cable Configuration | Up to 100% humidity, non-submerged, when ordered with integral cable |
| Environmental Resistance | Dust and moisture resistant |
Temperature Configuration Notice: The supplied documentation also lists a -29°C to +204°C range for model 74712. This rating does not apply to the standard 9200 transducer.
For this product, use the specified -29°C to +121°C operating and storage limits.
Connector and Signal Interface
The selected -01 connector option uses a top-mounted connection without an integral cable. Engineers must verify the external cable and termination arrangement before commissioning.
- Connector Position: Top-mounted.
- Cable Configuration: No integral cable.
- Signal Termination: 10 kΩ calibration load between terminals A and B.
- Output Measurement: Across pins A and B.
- Nominal Sensitivity: 20 mV/mm/s.
Maintain the specified calibration load when checking sensitivity. Different termination conditions may affect the measured output.

Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.



