Home 900U02-0100 Honeywell Universal Input/Output Module for Safety Manager

900U02-0100 Honeywell Universal Input/Output Module for Safety Manager

  • Manufacturer: Honeywell

  • Product No.: 900U02-0100

  • Condition: In stock

  • Product Type: Analog Input/Output Module

  • Product Origin: USA

  • Payment: T/T, Western Union

  • Weight: 500g

  • Shipping port: Xiamen

  • Warranty: 12 months

Selected quantity: 1
Request a quote

Estimate delivery times: 12-26 days (International), 3-6 days (United States).

Return within 30 days of purchase. Duties & taxes are non-refundable.

Guaranteed Safe Checkout

Visa
PayPal
Mastercard
American Express

Honeywell 900U02-0100 | Universal I/O for Safety Manager Systems

The Honeywell 900U02-0100 is a Safety Universal Input/Output (UIO) module for Honeywell Safety Manager systems. It combines analog input and analog output capabilities within one module.

The module handles 4–20 mA field signals and supports HART communication. It accepts 2-wire, 3-wire, and 4-wire current transmitters. Sink-type input transmitters are also supported.

Its configurable I/O architecture helps engineers allocate channels according to process requirements. The module supports up to 16 analog input channels and up to 8 analog output channels, subject to the selected configuration.

A 10 ms update rate supports process signal acquisition and output control. Channel-level protection and module isolation provide additional electrical protection for field interfaces.

01 | I/O Architecture – One Module, Multiple Signal Functions

Configuration Item Specification
Module type Safety Universal Input/Output Module
Manufacturer Honeywell
Model 900U02-0100
System family Safety Manager
Input signal 4–20 mA analog current
Output signal 4–20 mA analog current
HART communication Supported
Maximum analog inputs 16 channels per module
Maximum analog outputs 8 channels per module
Signal update rate 10 ms
Redundancy Non-redundant and redundant configurations supported

Channel allocation: The supplied configuration data lists 16 channels for non-redundant UIO operation and 14 channels for redundant UIO operation. The original non-redundant entry contains a formatting error ("161 Channels"). Confirm the exact channel allocation and supported combinations against the Honeywell hardware manual.

The analog output section lists eight channels as standard, with assignment to channel positions 9–16. Do not assume that the maximum input and output counts can operate simultaneously without checking the approved channel configuration.

02 | Field Power and Electrical Protection

The module provides a nominal 24 V DC field supply. Its protection architecture includes channel-level electronic short-circuit protection and internal fusing.

Electrical Parameter Specification
Field supply voltage 24 V DC typical
Minimum field voltage 22 V DC
Maximum field voltage 27 V DC
Maximum load per module 4.2 A
Maximum load per channel 500 mA
Electronic short-circuit protection 620 mA per channel, resettable
Internal channel fuse 1 A, non-replaceable
Field supply fuse 10 A internal electronic fuse
Module-to-rack isolation 1.5 kV DC, logic side
Module-to-module isolation 1.5 kV DC

Protection distinction: The 620 mA electronic short-circuit protection and 1 A internal fuse serve different protective functions. The electronic protection is resettable. The internal fuse is not field-replaceable.

Do not use the 10 A field supply fuse rating as the permitted module load. The stated maximum load is 4.2 A per module. Check the actual load distribution before connecting field devices.

03 | Analog Input – Transmitter Acquisition

The analog input section supports current transmitters in different wiring arrangements. It also supports HART communication and line monitoring.

Input Parameter Specification
Input type Current input
Supported transmitter wiring 2-wire, 3-wire, and 4-wire devices
Transmitter type Sink-type input transmitters supported
HART Supported
Maximum input channels 16 per module
Line monitoring Supported
Input range 4–20 mA
Cut-off limits 3–22 mA
A/D converter resolution 16 bit
Input impedance 250 Ω nominal
Maximum input voltage 0–30 V, referenced to common, no damage
Channel-to-channel crosstalk 58 dB, DC to 60 Hz
Transmitter field power conditioning Current limited to 24 mA
Input filter First-order low-pass, 1 kHz

Analog input hardware accuracy:

Operating Condition Non-redundant Redundant
23.5 ± 2 °C 0.1% of full scale 0.2% of full scale
0 to +60 °C 0.17% of full scale 0.34% of full scale

Engineering interpretation: The 16-bit A/D resolution defines the digital conversion granularity. It does not represent the complete measurement accuracy. For loop assessment, consider transmitter accuracy, module accuracy, wiring resistance, and grounding conditions together.

04 | Analog Output – Current Loop Control

The output section provides 4–20 mA current-loop signals for control valves, positioners, and other compatible field devices. HART communication is supported.

Output Parameter Specification
Output type 4–20 mA current loop
HART Supported
Maximum output channels 8 per module
Channel assignment Assignable as channels 9–16
Line monitoring Supported
Output accuracy at 25 °C Less than 0.5% of full scale, including linearity, over the operating temperature range
Redundant output accuracy Less than 1% of full scale, including linearity, over the operating temperature range
Output ripple ≤125 mV peak-to-peak at power-line frequency, across 250 Ω load
Output readback accuracy 0.17% of full scale
Output current linearity ±0.1% of full scale, nominal
Resolution 12 bit
Directly settable output range 2.4–21 mA
Minimum resistive load 250 Ω
Maximum resistive load 750 Ω, subject to confirmation against the original specification
Maximum output compliance voltage 14 V DC
Maximum open-circuit voltage 24 V DC
Maximum load capacitance Less than 1 µF

Output load considerations: The output circuit must operate within its specified load and compliance limits. Check the field device input resistance, cable resistance, and any series-connected barriers or isolators.

The source data lists the maximum resistive load as "7504 Ohms". This page interprets it as 750 Ω, but the value should be confirmed with the official Honeywell documentation before publication.

05 | Signal Processing and Application Considerations

  • Process measurement: Connect compatible 4–20 mA transmitters for pressure, temperature, flow, and level measurements.
  • Final element control: Use the analog output channels for compatible current-controlled actuators and positioners.
  • HART instrument integration: Support compatible HART field devices for digital instrument communication.
  • Channel monitoring: Use line monitoring to assist with field-loop fault identification.
  • Redundant architecture: Apply the approved redundant UIO configuration where the safety system design requires it.

The module combines signal acquisition and output functions. This can reduce the need for separate analog input and output modules in suitable system configurations.

06 | Commissioning Checks for Field Engineers

  1. Confirm the module identity. Verify 900U02-0100 against the system bill of materials and hardware configuration.
  2. Review channel allocation. Confirm the input and output assignments match the approved engineering configuration.
  3. Check transmitter wiring. Verify the 2-wire, 3-wire, or 4-wire connection method and transmitter current direction.
  4. Measure field supply voltage. Check the voltage at the module and at the field device under operating load.
  5. Verify current-loop loading. Include device resistance, cable resistance, and additional loop components.
  6. Test input scaling. Apply known current values and compare the engineering-unit readings with the configured range.
  7. Test output response. Check commanded current and measured loop current at several operating points.
  8. Review diagnostics. Check channel status, line monitoring, and protection indications before returning the system to service.

Tags

Q: Are these parts 100% original and new?

A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.

Q: How fast is the shipping to my country?

A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.

Q: Can I get a formal quotation with shipping costs?

A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.

Q: Do you offer discounts for bulk orders?

A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.




12-Month Comprehensive Warranty

Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.

  • Coverage: Functional defects and hardware failures under normal operating conditions.
  • Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.

Returns & Exchange Policy

We offer a 30-day return policy to ensure you receive the exact part your system requires.

  • Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
  • RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
  • Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.

Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.