8031-CE-LH MTL Instruments IS Carrier Extender Left Hand
Manufacturer: MTL
Product No.: 8031-CE-LH
Condition: In stock
Product Type: IS Carrier Extender
Product Origin: USA
Payment: T/T, Western Union
Weight: 100g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
Inter-Carrier Expansion Architecture & System Function
The 8031-CE-LH operates as a dedicated left-hand intrinsically safe (IS) carrier extender engineered by MTL Instruments to maintain uninterrupted Railbus data and power continuity across separated I/O carrier runs. Designed to pair with a right-hand extender (8030-CE-RH), this unit bridges physical gaps between DIN-rail segments inside dense marshalling cabinets. Its rugged polycarbonate and modified polyphenylene oxide housing supports both 32-slot and 64-slot node addressing architectures without signal degradation.
Technical Specifications & Interface Parameters
| Manufacturer Brand | MTL Instruments |
| Part Number / Model | 8031-CE-LH (ID: 8031-CE-LH) |
| Component Type | Left-Hand IS Carrier Extender (Female Out) |
| Node Addressing Support | 32-slot and 64-slot addressable node architectures |
| Maximum Node Expansion | Up to 3 extender pairs (LH & RH) per I/O node |
| Railbus Carrier Interface | Female-out multipin connector to adjacent carrier |
| Extender Cable Connector | 50-pin female Sub-D interface for multiway ribbon/shielded cable |
| DC Power Interface | 6-pin screw terminal block for external power supply continuity |
| Enclosure & PCB Materials | Modified poly-phenylene oxide moulding; epoxy resin woven glass laminate PCB |
| Physical Dimensions & Mass | 48 mm (W) x 168 mm (D) x 42 mm (H); approximate weight 140 g |
| Mounting Standard | Integral DIN-rail fixings (Top hat 35x7.5/15 mm EN 50022; G-section EN 50035) |
| Thermal & Humidity Envelope | Operating: –40 °C to +70 °C; Storage: –40 °C to +85 °C; 5–95% RH non-condensing |
Hazardous Area Certifications & Electrical Compliance
- North American Classification: Certified for deployment in Class I, Division 2, Groups A, B, C, D T4 hazardous locations.
- European Zone Rating: Approved for Zone 2, IIC T4 explosive gas atmospheres.
- System Pairing Logic: Functions as the left-hand termination (female out) mated via multiway cabling to an 8030-CE-RH (male in) counterpart.
Frequently Asked Questions (FAQ)
Q: How many carrier extender pairs can technicians cascade within a single I/O node?
A: System architecture limits expansion to a maximum of 3 extender pairs (each consisting of one left-hand and one right-hand module) per node to preserve Railbus signal integrity and timing margins.
Q: Why does the 8031-CE-LH incorporate both a 50-pin Sub-D port and a separate 6-pin screw terminal?
A: The 50-pin Sub-D connector routes high-density backplane data signals through a multiway interconnect cable, while the 6-pin screw terminal carries heavier DC field and system power across separated carrier rows without voltage drop.
Q: Can this left-hand extender connect directly to the right side of an I/O carrier?
A: No. The 8031-CE-LH features a female-out Railbus connector engineered specifically to terminate the left-hand end of a carrier run, mating with the male-in connector on the carrier's left side.
Q: What installation practices prevent communication dropouts on extended Railbus runs?
A: Always tighten the retaining jackscrews on the 50-pin Sub-D multiway cable and ensure the integral DIN-rail latches snap firmly onto EN 50022 or EN 50035 rails so mechanical vibration cannot unseat the multipin carrier connection.
Q: What preventive maintenance checks should engineers perform on the 8031-CE-LH during plant turnarounds?
A: Inspect the 6-pin DC power screw terminals for thermal discoloration or loose conductors, verify Sub-D connector pin retention, and check the polycarbonate housing for dust buildup inside high-humidity enclosures.
Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.



