Home 330904-00-15-05-12-00 Bently Nevada 3300 NSv Proximity Probe Quote
330904-00-10-05-11-05 Bently Nevada 3300 NSv Proximity Probe System
330904-00-10-50-12-00 Bently Nevada 3300 NSv Probe
330904-00-10-05-11-05 Bently Nevada 3300 NSv Proximity Probe System
330904-00-10-50-12-00 Bently Nevada 3300 NSv Probe

330904-00-15-05-12-00 Bently Nevada 3300 NSv Proximity Probe Quote

  • Manufacturer: Bently Nevada

  • Product No.: 330904-00-15-05-12-00

  • Condition: In stock

  • Product Type: Proximity Probe

  • Product Origin: USA

  • Payment: T/T, Western Union

  • Weight: 200g

  • Shipping port: Xiamen

  • Warranty: 12 months

Selected quantity: 1
Request a quote

Estimate delivery times: 12-26 days (International), 3-6 days (United States).

Return within 30 days of purchase. Duties & taxes are non-refundable.

Guaranteed Safe Checkout

Visa
PayPal
Mastercard
American Express

Transducer Architecture & Engineering Role: 330904-00-15-05-12-00

The Bently Nevada 330904-00-15-05-12-00 is an armored eddy-current transducer engineered within the 3300 NSv (Narrow Side-View) proximity probe family. Designed specifically for centrifugal air compressors, refrigeration compressors, and high-speed fluid-film bearing machines with tight radial clearances, this probe delivers high-resolution shaft vibration and axial thrust position measurements. Its enhanced polyphenylene sulfide (PPS) tip and chemical-resistant FluidLoc coaxial cable provide superior durability in harsh process gas environments while maintaining backward mechanical and electrical interchangeability with legacy 3300 RAM systems.

Part Number Configuration Breakdown

Every suffix segment in 330904-00-15-05-12-00 defines exact mechanical geometry, cable length, and connector hardware:

  • 330904 — Base Model: 3300 NSv Probe, M8 × 1 metric thread, supplied with stainless steel armor
    • -00 — Unthreaded Length Option: 0 mm (fully threaded case profile)
    • -15 — Overall Case Length Option: 150 mm
    • -05 — Total Cable Length Option: 0.5 meter (20 in) integral 75 Ω coaxial cable
    • -12 — Connector & Cable Option: Miniature coaxial ClickLoc connector with FluidLoc oil-blocking cable
    • -00 — Agency Approval Option: Not required (standard industrial configuration)

Electrical, Metrology & Mechanical Specifications

Verify all transducer electrical resistance, linear range, and torque limits prior to machine case installation:

Engineering Domain Technical Parameter Specification Value / Rating
Identification Manufacturer & Part Number Bently Nevada 330904-00-15-05-12-00 (3300 NSv Series)
Metrological Span Linear Measurement Range 1.5 mm (60 mils) total span: 0.25 to 1.75 mm (10 to 70 mils) (~ -1 to -13 Vdc)
Metrological Span Recommended Gap & Scale Factor 1.0 mm (40 mils) nominal gap | 7.87 V/mm (200 mV/mil) +12.5% / -20% ISF
Signal Fidelity Linearity (DSL) & Frequency Response DSL < ±0.06 mm (±2.3 mils) | 0 to 10 kHz (+0, -3 dB up to 305 m field wire)
Electrical Loop Probe DC Resistance (0.5 m length) 4.0 ± 0.5 Ω (center conductor to outer shield RPROBE)
Extension & Wiring Extension Cable & Field Triad Specs 0.220 Ω/m core, 0.066 Ω/m shield, 69.9 pF/m | 16–24 AWG triad (305 m max)
Target Geometry Minimum Flat Target Diameter 8.9 mm (0.35 in) absolute min | 13 mm (0.5 in) recommended min
Materials & Seal Tip, Case & Pressure Seal PPS tip | AISI 304 SST case | Viton O-ring differential seal | FEP 75 Ω cable
Mechanical Torque Case & ClickLoc Connector Torque Case: 5.1 N·m (45 in·lb) rec / 7.3 N·m (65 in·lb) max | ClickLoc: Finger tight (0.56 N·m max)
Mechanical Limits Thread Engagement & Bend Radius Max thread engagement: 12 mm | Min cable bend radius: 25.4 mm (1.0 in)
Environmental Operating & Storage Temperature -52°C to +177°C (-62°F to +351°F)

Model Selection Comparison & Engineering Guidance

Compare the 330904-00-15-05-12-00 directly against the longer-cable variant 330904-00-15-70-01-00 to ensure exact electrical system matching:

Comparison Parameter 330904-00-15-05-12-00 (This Model) 330904-00-15-70-01-00
Thread & Case Geometry M8 × 1 armored, 0 mm unthreaded, 150 mm case M8 × 1 armored, 0 mm unthreaded, 150 mm case
Total Probe Cable Length 0.5 meter (20 in) 7.0 meters (23 ft)
Connector & Cable Type -12: ClickLoc connector with FluidLoc oil-sealed cable -01: Miniature coaxial ClickLoc connector, standard cable
Required Extension Cable Requires 6.5 m (or 4.5 m) 3300 NSv extension cable to match 7.0 m (or 5.0 m) Proximitor Connects directly to a 7.0 m Proximitor sensor without an extension cable
  • Technical Selection Recommendation: Choose 330904-00-15-05-12-00 when routing probes through internal bearing housings where pressurized lube oil requires FluidLoc capillary blocking and an external junction box houses a 6.5 m extension cable. Select 330904-00-15-70-01-00 when you want a single continuous 7.0 m run directly to the Proximitor sensor without an intermediate ClickLoc junction.

Field Installation & Gapping Protocol

  • Electrical System Length Matching: Pair this 0.5 m probe strictly with a matching 3300 NSv extension cable (such as 4.5 m or 6.5 m) so the combined electrical length equals the exact 5.0 m or 7.0 m rating stamped on your 3300 XL NSv Proximitor Sensor.
  • Static Gap Calibration: Thread the M8 × 1 probe until the gap voltage reads approximately -9.0 Vdc (corresponding to the recommended 1.0 mm / 40 mils mechanical gap), then lock the jam nut to 5.1 N·m (45 in·lb) without exceeding 7.3 N·m.
  • Armor & Connector Protection: Maintain a minimum cable bend radius of 25.4 mm (1.0 in) and fasten the miniature ClickLoc connector finger-tight (never exceed 0.56 N·m / 5 in·lb).

Scope of Supply & Warranty

  • 1 × Bently Nevada 330904-00-15-05-12-00 3300 NSv Proximity Probe (New & Original in Factory Packing)
  • Warranty Coverage: Backed by a 12-Month factory warranty

Field Engineering FAQ

  • Q: What diagnostic check verifies coil integrity on the 330904-00-15-05-12-00 before machine startup?

    A: Measure DC resistance across the miniature ClickLoc center pin and outer shell using a calibrated digital multimeter; a healthy 0.5 m probe must read within 4.0 ± 0.5 ohms.

  • Q: Why does the -12 FluidLoc option matter in centrifugal compressor bearing housings?

    A: FluidLoc coaxial cable incorporates an internal sealant barrier that prevents pressurized synthetic or mineral lubricating oil from wicking through the cable strands into external junction boxes and Proximitor housings.

  • Q: How does target diameter affect scale factor accuracy on small-shaft axial thrust measurements?

    A: While the absolute minimum flat target is 8.9 mm (0.35 in), targets smaller than the recommended 13 mm (0.5 in) diameter alter the eddy-current field distribution and reduce Incremental Scale Factor; setting a slightly tighter initial gap helps compensate for this shift.

  • Q: Can this 3300 NSv probe replace an older 3300 RAM probe without changing the mounting bracket?

    A: Yes, 3300 NSv probes and extension cables are mechanically and electrically interchangeable with legacy 3300 RAM components while offering superior chemical resistance and improved side-view clearance.

  • Q: What happens if a technician over-torques the M8x1 probe case or engages threads beyond 12 mm?

    A: Exceeding the 7.3 N·m maximum case torque or threading beyond the 12 mm maximum engagement limit can distort the AISI 304 stainless steel housing, damage the internal Viton O-ring seal, or crack the PPS probe tip.

Tags

Q: Are these parts 100% original and new?

A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.

Q: How fast is the shipping to my country?

A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.

Q: Can I get a formal quotation with shipping costs?

A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.

Q: Do you offer discounts for bulk orders?

A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.




12-Month Comprehensive Warranty

Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.

  • Coverage: Functional defects and hardware failures under normal operating conditions.
  • Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.

Returns & Exchange Policy

We offer a 30-day return policy to ensure you receive the exact part your system requires.

  • Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
  • RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
  • Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.

Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.