330505-02-02-00 Bently Nevada 330505 Precision Vibration Sensor
Manufacturer: Bently Nevada
Product No.: 330505-02-02-00
Condition: In stock
Product Type: Velocity Sensor Module
Product Origin: USA
Payment: T/T, Western Union
Weight: 323g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
Product Introduction | Low-Frequency Vibration Measurement
The Bently Nevada 330505-02-02-00 is a Low Frequency Velocity Sensor for industrial machinery vibration monitoring.
It measures casing vibration velocity across a frequency range of 0.5 Hz to 1,000 Hz. Its low-frequency response supports applications requiring reliable vibration measurements at relatively slow operating speeds.
The sensor provides a nominal sensitivity of 20 mV/mm/s (508 mV/in/s). Its measurement range reaches 102 mm/s (4 in/s) peak. These characteristics support machinery condition monitoring and vibration protection applications.
The mechanical configuration features a 90° mounting angle and a 3/8-24 UNF-2B internal mounting thread. The mounting adapter option is configured without an additional adapter.
Its hermetically sealed stainless steel housing protects the internal sensing assembly. The two-pin MIL-C-5015 connector provides the electrical interface.
Product Identification
- Manufacturer: Bently Nevada
- Part Number: 330505-02-02-00
- Base Model: 330505
- Product Series: Low Frequency Velocity Sensor
- Product Type: Industrial Vibration Velocity Transducer
- Condition: New & Original in Factory Packing
- Factory Warranty: 12 Months
Configuration Architecture | Part Number Breakdown
The complete ordering code identifies the sensor model, mounting orientation, internal thread, and adapter configuration.
| Code | Configuration Item | Engineering Description |
|---|---|---|
| 330505 | Base Model | Low Frequency Velocity Sensor |
| -02 | Mounting Angle | 90° ± 5° |
| -02 | Internal Mounting Thread | 3/8-24 UNF-2B |
| -00 | Mounting Adapter Option | No Adapter |
Configuration Tree
-
330505 — Low Frequency Velocity Sensor
-
Mounting Orientation: -02
- 90° ± 5° mounting angle.
-
Internal Thread: -02
- 3/8-24 UNF-2B internal mounting thread.
-
Adapter Configuration: -00
- No additional mounting adapter.
-
Mounting Orientation: -02
Ordering Verification: Confirm all three configuration suffixes before purchasing. The mounting angle, thread size, and adapter selection determine the mechanical installation arrangement.
Performance Data | Electrical Measurement Characteristics
The following table summarizes the manufacturer's specified electrical and vibration measurement parameters.
| Parameter | Technical Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number | 330505-02-02-00 |
| Base Model | 330505 |
| Product Type | Low Frequency Velocity Sensor |
| Nominal Sensitivity | 20 mV/mm/s (508 mV/in/s), ±10% |
| Frequency Response, ±3 dB | 0.5–1,000 Hz (30–60,000 cpm) |
| Frequency Response, ±0.9 dB | 1–200 Hz (60–12,000 cpm) |
| Velocity Range | 102 mm/s (4 in/s) peak |
| Amplitude Linearity | ±3% up to 102 mm/s (4 in/s) peak |
| Output Bias Voltage | -12 ±1 VDC |
| Maximum Cable Length | 305 m (1,000 ft) with 3500/46M, without signal degradation under specified conditions |
Measurement Interpretation: The 0.5 Hz lower frequency limit supports low-frequency vibration monitoring. The tighter ±0.9 dB response applies from 1 Hz to 200 Hz.
Mechanical Construction | Mounting and Connector Details
| Parameter | Specification |
|---|---|
| Mounting Angle | 90° ± 5° |
| Internal Mounting Thread | 3/8-24 UNF-2B |
| Mounting Adapter | None |
| Case Material | 300 Series Stainless Steel |
| Electrical Connector | 2-pin MIL-C-5015 receptacle |
| Connector Construction | Hermetically sealed, 300 Series Stainless Steel |
| Typical Weight Limit | Less than 375 g (13.2 oz) |
| Maximum Mounting Torque | 46 kg·cm (40 in-lb) |
| Enclosure | Hermetically sealed case |
The 90-degree mounting arrangement helps engineers accommodate restricted installation spaces. The specified internal thread provides a defined mechanical interface.
Verify the available mounting clearance before installation. The no-adapter configuration requires a compatible mounting interface at the installation point.
Environmental Performance | Operating Limits
| Environmental Parameter | Specified Limit |
|---|---|
| Operating Temperature | -40°C to +100°C (-40°F to +212°F) |
| Storage Temperature | -40°C to +100°C (-40°F to +212°F) |
| Maximum Mounted Surface Temperature | +100°C |
| Shock Survivability | 981 m/s² (100 g) peak |
| Relative Humidity | Up to 100%, non-submerged |
| Housing Protection | Hermetically sealed case |
Environmental Note: The humidity specification applies to non-submerged conditions. Do not interpret hermetic sealing as approval for underwater installation.
Electrical Polarity | Signal Interface
Correct signal polarity is essential when connecting the transducer to a machinery monitoring system.
| Connection Item | Description |
|---|---|
| Connector Type | 2-pin MIL-C-5015 receptacle |
| Pin A | Becomes positive relative to Pin B during upward applied velocity. |
| Pin B | Reference terminal for the specified polarity relationship. |
| Output Bias | -12 ±1 VDC |
Polarity Definition: Pin A becomes positive with respect to Pin B when applied velocity moves from the transducer base toward its top.
Maintain this polarity relationship during installation and signal verification. Incorrect wiring can reverse the measured vibration waveform.
System Integration | Cable and Monitoring Compatibility
The manufacturer specifies a maximum cable length of 305 m (1,000 ft) when using the sensor with the Bently Nevada 3500/46M under the stated conditions.
| Integration Item | Technical Consideration |
|---|---|
| Monitoring System | Bently Nevada 3500/46M |
| Maximum Specified Cable Length | 305 m (1,000 ft) |
| Signal Type | Velocity-related electrical output |
| Connector Interface | 2-pin MIL-C-5015 |
| Signal Polarity | Pin A positive relative to Pin B for base-to-top velocity |
Verify the monitoring channel configuration before commissioning. Confirm input compatibility, signal scaling, cable specifications, and system documentation.
Important: The 305 m cable specification explicitly references use with the 3500/46M. Do not automatically apply this limit to other monitoring systems.
Product Selection | When to Choose Model 330505
Engineers should select the 330505 Low Frequency Velocity Sensor when the application requires low-frequency vibration measurement and the specified mechanical configuration.
| Selection Requirement | 330505 Configuration |
|---|---|
| Low-Frequency Measurement | Response starts at 0.5 Hz |
| Nominal Sensitivity | 20 mV/mm/s |
| Mounting Orientation | 90° ± 5° |
| Mounting Thread | 3/8-24 UNF-2B |
| Adapter Requirement | No adapter |
| Monitoring Integration | Specified 3500/46M cable-length application |
Before ordering, compare the mounting drawing with the existing sensor. Verify the frequency range and measurement direction against the machine monitoring requirements.
Warranty and International Shipping
| Commercial Item | Supply Information |
|---|---|
| Product Condition | New & Original in Factory Packing |
| Warranty | 12 Months Factory Warranty |
| Shipping Options | FedEx / UPS / DHL |
| Order Verification | Model and configuration confirmation |
| Technical Support | Product selection and compatibility assistance |
We provide a 12-month factory warranty under the applicable sales and warranty terms.
International delivery is available through FedEx, UPS, and DHL. Contact our sales team for shipping estimates, stock information, and order confirmation.

Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.



