330302-000-011-10-90-00-05 Bently Nevada 3300 High Temperature Proximity Probe
Manufacturer: Bently Nevada
Product No.: 330302-000-011-10-90-00-05
Condition: In stock
Product Type: Proximity Probe
Product Origin: USA
Payment: T/T, Western Union
Weight: 320g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
Transducer Architecture & Operational Purpose
The Bently Nevada 330302-000-011-10-90-00-05 is a high-temperature eddy current proximity transducer engineered within the 3300 High Temperature Proximity System (HTPS). Manufactured in the U.S.A. with a ceramic sensing tip and AISI 316L stainless steel case, this probe measures shaft vibration and axial position in extreme thermal zones up to +350°C (+662°F). Its integrated 1.0-metre hardline cable and matched 9.0-metre system length eliminate external in-line connectors inside hot turbine or compressor casings.
Part Number Breakdown & Configuration Tree
The 330302-000-011-10-90-00-05 catalog code specifies exact mechanical dimensions, cable lengths, and hazardous area certifications:
-
Base Model: 330302 — 3300 High Temperature Proximity Probe (M14 x 1.5 thread metric variant)
- Unthreaded Length (-000): 0 mm (Fully threaded case to sensing tip)
- Overall Case Length (-011): 11 mm total probe body length
- Hardline Length (-10): 1.0 metre (3.3 feet) integral mineral-insulated hardline cable
- Total System Length (-90): 9.0 metres (30 feet), inclusive of factory-matched extension cable
- Extension Cable Armor (-00): Without stainless steel armor
- Agency Approval (-05): Multiple hazardous location approvals
Electromechanical & Thermal Specifications
| Performance Metric | Engineering Specification |
|---|---|
| Manufacturer & Origin | Bently Nevada (Made in U.S.A.) |
| Full Ordering Code | 330302-000-011-10-90-00-05 (3300 HTPS Series) |
| Operating & Storage Temp | -34°C to +350°C (-30°F to +662°F) continuous probe rating |
| Linear Measurement Range | 4.0 mm (160 mils) calibrated linear span |
| Incremental Scale Factor (ISF) | 3.94 V/mm (100 mV/mil) ±9.65% at ambient (including interchangeability error) |
| Deviation from Straight Line (DSL) | Less than ±78 μm (±3.1 mils) at room temperature |
| Extended Temp System Drift | 22°C to +350°C: ISF within ±30% of 3.94 V/mm; DSL within ±0.51 mm (±20 mils) |
| Frequency Response | 0 to 6 kHz (+0, -3 dB typical with up to 305 m / 1000 ft of field wiring) |
| Probe DC Resistance (RPROBE) | 5.06 Ω nominal (1.0 m hardline center-to-outer conductor) |
| Minimum Target Geometry | Flat target: 30.5 mm (1.2 in) diameter | Shaft: 152 mm (6.0 in) minimum diameter |
| Wetted & Structural Materials | Ceramic sensing tip; AISI 316L stainless steel (SST) case |
| Unit Mass Calculation | 117 g/m (1.26 oz/ft) hardline cable + 12 g/cm (1.07 oz/in) probe case |
Field Installation & Commissioning Guidelines
- Inspect Target Surface Dimensions: Verify shaft diameter meets or exceeds 152 mm (6.0 in) to prevent side-view eddy current field distortion.
- Route Integral Hardline Carefully: Bend the 1.0 m mineral-insulated hardline smoothly out of the +350°C hot zone before transitioning to the included extension cable.
- Prevent Hardline Kinking: Support the rigid hardline with high-temperature stainless steel P-clips to prevent fatigue fractures from casing vibration.
- Verify DC Resistance Before Gap Setting: Measure 5.06 Ω across the probe connector to confirm intact internal coil continuity prior to setting the mechanical gap.
System Compatibility & Operational Boundaries
- Proximitor Pairing: Requires a matched Bently Nevada 3300 HTPS 9.0-metre Proximitor sensor calibrated to the 3.94 V/mm (100 mV/mil) scale factor.
- Thermal Zone Separation: Keep the extension cable junction and Proximitor electronics outside the +350°C enclosure within their respective lower temperature limits.
Package Contents
- 1 × Bently Nevada 330302-000-011-10-90-00-05 High Temperature Proximity Probe (11 mm case, 1.0 m hardline)
- 1 × Factory-matched High-Temperature Extension Cable (completing the 9.0 m total system length)
Frequently Asked Questions (FAQ)
Q1: Why does this probe specify a 152 mm (6.0 in) minimum shaft diameter compared to standard 8 mm probes?
A1: The larger ceramic sensing coil generates a wider electromagnetic field to achieve a 4.0 mm (160 mil) linear range; smaller shafts curve away too sharply and skew the incremental scale factor.
Q2: Can I shorten or splice the 1.0-metre hardline cable if it is too long for my turbine bearing housing?
A2: Never cut or splice the mineral-insulated hardline, as its 5.06 Ω impedance and distributed capacitance are tuned to the 9.0-metre Proximitor resonant circuit.
Q3: How should engineers interpret the ±30% ISF tolerance across the +22°C to +350°C operating span?
A3: Extreme heat alters coil resistance and target permeability; this probe is engineered primarily for dynamic relative vibration measurements at elevated temperatures rather than precision cold-to-hot absolute thermal growth tracking.
Q4: What precautionary steps are required when installing the unarmored (-00) extension cable in industrial plants?
A4: Because option -00 omits stainless steel armor, route the extension cable inside rigid metallic conduit once it exits the high-temperature machine casing to prevent mechanical abrasion.
Q5: How do I verify probe integrity during a turbine outage without removing the transducer from its mount?
A5: Disconnect the extension cable at the Proximitor and measure center-to-shield DC resistance; readings deviating significantly from 5.06 Ω (plus extension cable resistance) indicate open coils or moisture ingress in the hardline.

Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.



