Home 330104-15-23-10-02-00 Proximity Probe 3300 XL 8mm Bently Nevada
330104-00-05-05-11-05 Bently Nevada 3300 XL 8mm Proximity Probe
Bently Nevada 330104-01-09-10-12-05 3300 XL Series Proximity Probe
330104-00-05-05-11-05 Bently Nevada 3300 XL 8mm Proximity Probe
330104-00-05-05-11-05 Bently Nevada 3300 XL 8mm Proximity Probe
Bently Nevada 330104-01-09-10-12-05 3300 XL Series Proximity Probe
330104-00-05-05-11-05 Bently Nevada 3300 XL 8mm Proximity Probe

330104-15-23-10-02-00 Proximity Probe 3300 XL 8mm Bently Nevada

  • Manufacturer: Bently Nevada

  • Product No.: 330104-15-23-10-02-00

  • Condition: In stock

  • Product Type: Proximity Probe

  • Product Origin: USA

  • Payment: T/T, Western Union

  • Weight: 323g

  • Shipping port: Xiamen

  • Warranty: 12 months

Selected quantity: 1
Request a quote

Estimate delivery times: 12-26 days (International), 3-6 days (United States).

Return within 30 days of purchase. Duties & taxes are non-refundable.

Guaranteed Safe Checkout

Visa
PayPal
Mastercard
American Express

Transducer Architecture & Mechanical Profile: 330104-15-23-10-02-00

The Bently Nevada 330104-15-23-10-02-00 is an armored metric eddy-current transducer engineered within the 3300 XL 8 mm proximity probe platform. Configured with a 150 mm unthreaded tip section and a 230 mm overall case length, this M10 × 1 threaded probe reaches deeply recessed journal bearings and turbine shaft targets while maintaining rigid mechanical support. Coupled with a 1.0-meter integral coaxial cable and miniature ClickLoc connector, it delivers a 2.0 mm (80 mils) linear measurement range for radial vibration, axial thrust position, and Keyphasor reference monitoring on critical rotating machinery.

Part Number Configuration Tree

Each option code in 330104-15-23-10-02-00 specifies exact dimensional geometry, cable assembly length, and certification tier:

  • 330104 — Base Model: 3300 XL 8 mm Proximity Probe, M10 × 1 metric thread, with stainless steel armor
    • -15 — Unthreaded Length Option: 150 mm smooth tip section (prevents thread binding in deep bores)
    • -23 — Overall Case Length Option: 230 mm total probe barrel length
    • -10 — Total Cable Length Option: 1.0 meter (3.3 feet) integral coaxial lead
    • -02 — Connector & Cable Option: Miniature ClickLoc coaxial connector, standard cable
    • -00 — Agency Approval Option: Not required (standard industrial build)

Electrical, Metrological & Mechanical Specifications

Reference the engineering parameters below when validating loop resistance, static gap voltage, and mechanical mounting torque:

Subsystem Engineering Parameter Specification Value / Rating
Identification Manufacturer & Part Number Bently Nevada 330104-15-23-10-02-00 (3300 XL 8 mm Series)
Metrology Linear Measurement Range 2.0 mm (80 mils) total span: 0.25 to 2.3 mm (10 to 90 mils) (~ -1 to -17 Vdc)
Metrology Recommended Radial Gap Setting -9 Vdc [approximately 1.27 mm (50 mils) from shaft target]
Electrical Loop Nominal Probe DC Resistance (1.0 m) 7.59 ± 0.50 Ω (center conductor to outer shield RPROBE)
Field Wiring Proximitor-to-Monitor Cabling 0.2 to 1.5 mm² (16–24 AWG) 3-conductor shielded triad; 305 m (1,000 ft) max
Materials & Seal Tip, Case & Pressure Seal PPS tip | AISI 303 or 304 SST case | Viton® O-ring differential pressure seal
Mechanical Thread Size, Engagement & Mass M10 × 1 thread | Max thread engagement: 15 mm | Linear mass: 323 g/m (11.4 oz)
Torque Limits Forward-Mounted Case Torque Recommended: 11.2 N·m (100 in·lbf) | Maximum rated: 33.9 N·m (300 in·lbf)
Environment Operating / Storage Temperature Standard: -52°C to +177°C (-62°F to +350°F) (Extended tip rating up to +218°C)
Humidity Environmental Stability (IEC 68-2-3) < 3% change in Average Scale Factor (ASF) after 56 days at 93% relative humidity

Model Selection Comparison & Engineering Guidance

Evaluate 330104-15-23-10-02-00 alongside 330104-00-05-05-11-05 to align probe barrel length, cable termination, and hazardous-area approvals with your machine train:

Selection Criterion 330104-15-23-10-02-00 (This Model) 330104-00-05-05-11-05
Unthreaded / Case Length 150 mm unthreaded / 230 mm overall case 0 mm unthreaded / 50 mm overall case
Total Integral Cable Length 1.0 meter (3.3 feet) 0.5 meter (20 inches)
Connector & Cable Type -02: Miniature ClickLoc coaxial connector, standard cable -11: Miniature ClickLoc connector with FluidLoc oil-sealed cable
Agency Approvals -00: Not required (unclassified area) -05: Multiple hazardous-area approvals (CSA, ATEX, IECEx)
  • Technical Selection Recommendation: Select 330104-15-23-10-02-00 for deep-reach bearing housing penetrations requiring a 230 mm barrel with a 150 mm unthreaded snout in standard non-hazardous industrial zones. Choose 330104-00-05-05-11-05 when mounting in shallow 50 mm brackets inside Zone 0/1/2 hazardous locations where pressurized lube oil demands FluidLoc cable sealing.

Hazardous Area Reference (3300 XL Series Architecture)

  • Intrinsic Safety (Ex ia): When ordered with agency approvals and wired via Zener barriers (Drawing 141092) or galvanic isolators, the 3300 XL probe platform supports Class I, Zone 0: AEx/Ex ia IIC T5...T1 Ga and Class I/II/III Division 1 groups (T1 to T5 ambient ratings from -55°C up to +232°C).
  • Nonincendive / Increased Safety (Ex nA / ec): When connected per Drawing 140979, approved variants comply with Class I, Zone 2: AEx/Ex nA / ec IIC T5...T1 Gc and Class I, Division 2, Groups A, B, C, and D.

Installation & Commissioning Guidelines

  • Extension Cable System Matching: Pair this 1.0 m probe strictly with a matching 3300 XL extension cable (4.0 m or 8.0 m) so total electrical length equals the exact 5.0 m or 9.0 m calibration of your 3300 XL Proximitor Sensor.
  • Static Gapping & Torque Control: Thread the M10 × 1 barrel to achieve a static gap output of -9.0 Vdc (~1.27 mm / 50 mils), engage no more than 15 mm of thread length, and tighten the locknut to 11.2 N·m (100 in·lbf).
  • Low-Temperature Seal Precaution: Avoid exposing the Viton® pressure seal to continuous temperatures below -34°C (-30°F) in pressurized differential applications to prevent elastomer hardening and premature seal leakage.

Field Engineering FAQ

  • Q: What resistance reading confirms coil and cable continuity on the 330104-15-23-10-02-00 during loop checks?

    A: Measure DC resistance between the miniature ClickLoc center conductor and outer shield; a properly functioning 1.0 m probe measures 7.59 ± 0.50 ohms.

  • Q: Why does this probe specify a 150 mm unthreaded length within its 230 mm overall case?

    A: The 150 mm unthreaded forward section allows the probe tip to pass through thick bearing pedestals or unthreaded clearance bores without galling threads, while keeping thread engagement within the 15 mm maximum limit.

  • Q: Can this -00 agency option probe be installed in a Class I, Division 2 or Zone 0 hazardous area?

    A: No, although the 3300 XL series supports Ex ia and Ex nA/ec certifications when ordered with agency approval options (such as -05), the -00 suffix designates an uncertified build restricted to non-hazardous locations.

  • Q: What happens to high-frequency vibration signals when field wiring between the Proximitor and monitor approaches 305 meters?

    A: Field runs up to 305 meters (1,000 feet) using 16–24 AWG shielded triad cable remain within specification, but increased line capacitance causes predictable high-frequency signal rolloff at upper kilohertz frequencies.

  • Q: Are 3300 XL 8 mm probes pressure-tested at the factory for differential pressure applications?

    A: No, while the internal Viton® O-ring is engineered to seal differential pressure between the PPS tip and stainless steel case, units are not hydrostatically or pneumatically pressure-tested prior to shipment unless custom factory testing is requested.

Tags

Q: Are these parts 100% original and new?

A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.

Q: How fast is the shipping to my country?

A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.

Q: Can I get a formal quotation with shipping costs?

A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.

Q: Do you offer discounts for bulk orders?

A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.




12-Month Comprehensive Warranty

Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.

  • Coverage: Functional defects and hardware failures under normal operating conditions.
  • Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.

Returns & Exchange Policy

We offer a 30-day return policy to ensure you receive the exact part your system requires.

  • Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
  • RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
  • Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.

Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.