177230-01-02-05 Bently Nevada 3300 Seismic Velocity Transmitter
Manufacturer: Bently Nevada
Product No.: 177230-01-02-05
Condition: In stock
Product Type: Seismic Velocity Transmitter
Product Origin: USA
Payment: T/T, Western Union
Weight: 131g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
Product Overview | 177230-01-02-05 Seismic Transmitter
The Bently Nevada 177230-01-02-05 is an industrial seismic velocity transmitter. It converts machine vibration into a proportional 4–20 mA signal.
It provides a direct interface between machinery and PLC, DCS, or SCADA monitoring systems. The current-loop output allows control systems to monitor vibration without a separate signal converter.
The transmitter uses a ceramic shear sensing element. Its 316L stainless steel housing provides mechanical protection in demanding industrial environments.
The device also provides an unbuffered dynamic acceleration signal through Pin C. This connection supports additional vibration signal analysis when the monitoring architecture requires it.
Typical applications include pumps, motors, fans, compressors, and other rotating machinery. Engineers can use the transmitter for continuous vibration trending and machinery condition monitoring.
Model Identification | Configuration Breakdown
The complete catalog number contains three configuration fields. Each suffix identifies a specific measurement or frequency option.
| Configuration | Code | Technical Meaning |
| Base Model | 177230 | Seismic velocity transmitter |
| Measurement Range | 01 | 0–25.4 mm/s (0–1.0 in/s) |
| Frequency Response | 02 | 3 Hz–1 kHz, ±10% |
| Approval Option | 05 | Multiple approvals: CSA/NRTL/C, ATEX/IECEx |
Complete Configuration:
- 177230 – Product family and transmitter identification.
- -01 – 25.4 mm/s full-scale measurement range.
- -02 – 3 Hz to 1 kHz frequency response.
- -05 – Multiple approval configuration.
Ordering Note: Match all three suffix fields when selecting a replacement. A different range or frequency option can change the monitoring system's scaling and alarm interpretation.
Technical Specifications
| Manufacturer | Bently Nevada |
| Model | 177230-01-02-05 |
| Product Series | 177230 Seismic Transmitter |
| Product Type | Seismic Velocity Transmitter |
| Country of Origin | USA |
| Sensing Element | Ceramic / Shear |
| Measurement Variable | Vibration Velocity |
| Full-Scale Range | 0–25.4 mm/s (0–1.0 in/s), ±10% |
| Output Signal | 4–20 mA current loop |
| Frequency Response | 3 Hz–1 kHz, ±10% |
| Zero Output | 4 ±0.3 mA at 0 mm/s |
| Full-Scale Output | 20 ±2 mA |
| Output Characteristics | Proportional to peak vibration levels |
| Excitation Voltage | 12–30 V DC |
| Current Limitation | 40 mA |
| Settling Time | Less than 15 seconds, within 2% of final value |
| Mounted Resonant Frequency | Greater than 12 kHz |
| Transverse Sensitivity | Less than 5% of sensitivity |
| Operating Temperature | -40°C to +85°C |
| Relative Humidity | Up to 100%, non-submerged |
| Electrical Isolation | Greater than 10⁸ ohms |
| Isolation Breakdown Voltage | 600 Vrms, less than 1 mA leakage |
| Shock Survivability | 1 g peak maximum drop test |
| Magnetic Field Sensitivity | Less than 20 μm/s/gauss peak |
| Magnetic Acceleration Sensitivity | Less than 14.7 mm/s²/gauss peak |
| Sensor Seal | Hermetically sealed |
| Housing Material | 316L stainless steel |
| Connector | 3-pin MIL-C-5015, 316L stainless steel |
| Mounting Hole | 1/4-28 UNF |
| Mounting Threads | M6 × 1, M8 × 1.25, 1/4-28 UNF |
| Mounting Torque | 4–7 N·m (35.4–62.0 in-lb) |
| Diameter | 25.4 mm (1.00 in) |
| Height | 66.0 mm (2.60 in) |
| Weight | Approximately 131 g (4.62 oz) |
Signal Architecture and Electrical Connections
The three-pin connector carries the current-loop output and dynamic signal. Correct polarity is essential for reliable integration.
| Connector Pin | Signal Assignment | Engineering Description |
| Pin A | 4–20 mA Positive Loop | Positive current-loop connection, referenced to Pin B. |
| Pin B | 4–20 mA Loop Return | Negative loop return and common reference for the dynamic signal. |
| Pin C | Dynamic Acceleration Signal | Unbuffered acceleration output, referenced to Pin B. |
Current-Loop Signal Relationship:
- 4 mA represents zero vibration velocity.
- 20 mA represents 25.4 mm/s full scale.
- Intermediate current values represent proportional peak vibration levels.
PLC/DCS Integration Considerations:
- Provide a suitable 12–30 V DC excitation source.
- Check the input card's loop supply and current capacity.
- Confirm the analog input supports a 4–20 mA signal.
- Configure the engineering range to 0–25.4 mm/s.
- Verify signal polarity before energizing the circuit.
The transmitter limits excitation current to 40 mA. The specified application guidance references control-system supplies with typical current limits of 30–35 mA. Confirm the complete loop's voltage and current requirements before commissioning.
Mechanical Installation and Mounting
Mechanical mounting directly affects vibration transmission. A loose connection can introduce measurement errors or unwanted resonance.
- Inspect the mounting surface for flatness and mechanical damage.
- Confirm the mounting thread matches the installation hardware.
- Remove dirt, oil, and debris from the contact surface.
- Secure the transmitter using the specified mounting arrangement.
- Apply the recommended mounting torque of 4–7 N·m.
- Protect the MIL-C-5015 connector against moisture and mechanical stress.
- Route cables away from high-current conductors and moving components.
Important: The mounting interface must provide rigid mechanical coupling. Avoid loose adapters and excessive thread engagement.
Environmental Protection and Reliability
The transmitter uses a hermetically sealed sensor and 316L stainless steel housing. These features support installation in demanding industrial environments.
- Operating temperature: -40°C to +85°C.
- Relative humidity: Up to 100%, non-submerged.
- Electrical isolation: Greater than 10⁸ ohms.
- Isolation breakdown: 600 Vrms.
- Transverse sensitivity: Less than 5%.
- Magnetic sensitivity: Less than 20 μm/s/gauss peak.
The stated humidity rating does not permit submerged operation. Maintain proper connector sealing and cable protection.
Approvals and Certification
The -05 configuration identifies multiple approval options. The supplied configuration information lists:
- CSA / NRTL/C
- ATEX
- IECEx
Verify the actual approval markings, certificate numbers, and hazardous-area requirements against the product nameplate and project documentation before installation.
Packaging, Warranty and Shipping
Product: Bently Nevada Seismic Transmitter
Model: 177230-01-02-05
Country of Origin: USA
Standard Package:
- 1 × Bently Nevada 177230-01-02-05 Seismic Transmitter.
- Standard protective product packaging.
Connecting cables, mounting accessories, and additional documentation require separate confirmation.

Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.



