128987-130-01-05 Proximity Sensor System Cable Bently Nevada 3300 XL
Manufacturer: Bently Nevada
Product No.: 128987-130-01-05
Condition: In stock
Product Type: Proximity Probe
Product Origin: USA
Payment: T/T, Western Union
Weight: 200g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
Interconnect Function & System Architecture
The Bently Nevada 128987-130-01-05 is a precision coaxial interconnect engineered for 3300 XL 8 mm eddy-current proximity transducer systems. Designed to maintain strict electrical impedance matching between the sensing probe and the Proximitor oscillator, this assembly preserves signal fidelity across a 0 to 10 kHz frequency band. Built for continuous operation in high-humidity and elevated-temperature rotating machinery environments, the 128987-130-01-05 carries multi-agency hazardous area approvals for critical turbine, compressor, and pump protection loops.
Ordering Code & Configuration Tree
Every suffix segment in the 128987-130-01-05 part string establishes exact physical length, mechanical armor, and regulatory compliance:
-
Base Series Code: 128987 — 3300 XL 8 mm Proximity Sensor System Interconnect Base
- Length Specifier (-130): Dedicated 13.0-metre (42.7-foot) electrical cable length configuration
- Armor / Cable Option (-01): Coaxial cable construction option tailored for industrial mechanical routing
- Agency Approval (-05): Multiple hazardous location certifications (CSA, ATEX, IECEx compliant)
Electromechanical & Environmental Specification Matrix
| Technical Parameter | Engineering Specification |
|---|---|
| Manufacturer & Product Line | Bently Nevada — 3300 XL 8 mm Proximity System |
| Full Part Number | 128987-130-01-05 |
| Component Classification | Proximity Sensor System Cable |
| System Sensitivity | 200 mV/mil (7.87 V/mm) nominal system scale factor |
| Linear Gap Span | 0.5 mm to 2.5 mm operating target gap range |
| Frequency Bandwidth | 0 to 10 kHz dynamic vibration response |
| System Supply Voltage | –18 VDC to –26 VDC oscillator input rail |
| Thermal Operating Limits | Cable rating: –35°C to +150°C | Standard probe tip reference: –35°C to +125°C |
| Humidity Tolerance | Up to 100% relative humidity (non-condensing) |
| Hazardous Area Approvals | Multiple approvals (ATEX, IECEx, CSA via Option -05) |
| Net Component Mass | 0.25 kg |
Routing, Termination & Commissioning Guidelines
- Verify Total Electrical System Length: Confirm that the combined probe and 128987-130-01-05 cable length matches the exact calibrated length stamped on your Proximitor housing.
- Respect Minimum Bend Radius: Route the coaxial cable smoothly around bearing pedestals without sharp kinks that alter center-conductor dielectric spacing.
- Isolate Coaxial Shields: Ensure the outer braided shield remains electrically isolated from machine ground along the entire run to prevent ground-loop hum.
- Seal External Junctions: Wrap external coaxial connectors with silicone self-fusing tape (outside oil-submerged sumps) to block moisture ingress in 100% RH environments.
Warranty & Global Express Logistics
- 12-Month Operational Warranty: Every Bently Nevada 128987-130-01-05 cable includes a comprehensive 12-month warranty covering impedance stability and insulation integrity.
- Priority International Air Freight: Ready-to-ship inventory dispatches worldwide via FedEx, UPS, or DHL express courier networks.
Engineering Selection Guide
Specify the 128987-130-01-05 when replacing damaged interconnects or extending sensor runs to remote explosion-proof junction boxes in 3300 XL 8 mm installations requiring CSA, ATEX, or IECEx compliance. Always verify whether your cabinet layout calls for standard flexible coaxial jacket or stainless-steel armored protection before finalizing procurement.
Frequently Asked Questions (FAQ)
Q1: Why is exact electrical cable length matching critical in eddy-current proximity systems?
A1: The coaxial cable acts as a tuned capacitive element inside the Proximitor's high-frequency tank circuit; substituting a different cable length shifts the resonant frequency and skews the 200 mV/mil sensitivity curve.
Q2: Can technicians cut and re-terminate a damaged connector on the 128987-130-01-05 cable in the field?
A2: Field trimming is strongly discouraged because altering physical length changes total distributed capacitance, and non-factory crimps introduce impedance reflections across the 0 to 10 kHz bandwidth.
Q3: How do I check if moisture or oil has migrated inside the coaxial dielectric during troubleshooting?
A3: Disconnect both ends of the cable and measure insulation resistance between the center pin and outer shell using a low-voltage ohmmeter; any reading below infinite open-circuit indicates dielectric contamination.
Q4: What is the practical benefit of ordering the -05 multiple agency approval option for plant spare stock?
A4: Stocking the -05 certified variant allows maintenance teams to deploy a single spare part across both general-purpose safe areas and Class I Zone 1/2 or Division 1/2 hazardous locations without audit discrepancies.
Q5: What causes erratic spikes on a 3300 XL vibration channel when the cable passes near high-horsepower VFD feeders?
A5: Routing low-level coaxial transducer cables parallel to unshielded motor power leads couples switching noise onto the shield; maintain at least 300 mm separation or route inside dedicated grounded steel conduit.
Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.



