Pepperl+Fuchs K-LB-2.30G Surge Protector | 2-Channel DIN Rail Barrier

Product Profile: K-LB-2.30G Surge Protection Barrier

The Pepperl+Fuchs K-LB-2.30G is a high-performance surge protection module designed to shield field and control circuits from lightning-induced transients and switching operations. Engineered for 30V applications, this device handles up to 20kA surge currents while maintaining HART transparency. Its auto-reset functionality ensures uninterruptible process operation, even in high-stakes environments.

Configuration and Performance Matrix

• Model: K-LB-2.30G (2-Channel / 4-Line Protection)
• Surge Capacity: 20 kA (8/20 µs) total discharge current
• Safety Integrity: SIL 3 rated per IEC/EN 61508
• Voltage Rating: 24V DC Nominal / 30V DC Max Operating
• Series Resistance: < 0.5 Ω per line (Minimizes signal attenuation)
• Mounting: 35 mm DIN Rail (EN 60715)
• Certification: ATEX, IECEx, and cCSAus approved for hazardous areas

Global PLC Spare HUB Insight

Our engineering team recognizes the K-LB-2.30G as an essential layer of protection for sensitive field instrumentation. In plants where ground potential can vary significantly, this unit’s robust topology prevents "ground-loop" induced failures. It is highly recommended for protecting I/O modules connected to critical transmitters, flow meters, and PLC analog inputs in environments prone to electromagnetic interference.

Diagnostics & Operational Installation

The K-LB-2.30G features a dedicated front-panel labeling area for systematic asset management. For optimal performance, it must be installed with a low-impedance connection to a high-quality earth ground system. The device does not require periodic manual resets; its rapid < 30ms impulse reset time ensures your safety loops return to full protection immediately after an event.

Logistics and Warranty Excellence

• Warranty: 12-month quality assurance guarantee.
• Logistics: Global transit via FedEx, UPS, or DHL.
• Speed: Guaranteed dispatch within 24–48 hours.

Expert FAQs and Selection Guidance

Q: Does the K-LB-2.30G block HART digital signals?
A: No, the module is fully HART transparent, meaning it allows digital communication overlays to pass through without signal degradation.

Q: Can I use this for non-intrinsically safe loops?
A: Yes, it is rated for both intrinsically safe and non-intrinsically safe circuits, offering versatile protection for mixed I/O configurations.

Q: What is the most common cause of protection failure?
A: The most frequent cause is a high-resistance ground connection. Always verify that the device shares the same potential as the equipment it protects.

Q: Is the K-LB-2.30G suitable for high-speed data lines?
A: With an insertion loss ≤ 3 dB at 174 kHz, it is ideal for analog signals and slower process data, but always evaluate the frequency requirements of your specific field bus.

Q: Selection Guide: How do I choose between different discharge ratings?
A: Choose the K-LB-2.30G when you require high-capacity protection (20kA) for critical SIL-rated loops. For non-critical low-voltage sensors, smaller footprint barriers may suffice.

Tags