IC695CNM001 GE Fanuc RX3i CANopen Master Module Comm Bridge

Product Overview

The IC695CNM001 is a specialized communication interface engineered for the GE Fanuc RX3i PacSystems architecture. As a dedicated CANopen Master, it facilitates seamless data exchange between the RX3i CPU and peripheral fieldbus devices. With support for 11-bit CAN frame data transport and a variable baud rate up to 1 Mbit/s, this module is built for precision synchronization in complex motion and distributed I/O control systems.

Engineering Technical Specifications

• Model: IC695CNM001
• Series: RX3i PacSystems
• Bus Interface: 9-pin D-connector (Male)
• Baud Rate: 10 kbits to 1 Mbits
• I/O Capability: Master control for up to 5 slave nodes
• PDO Support: 15 Transmit PDOs / 30 Receive PDOs
• Power Requirements: 800 mA backplane current @ 3.3 VDC
• Configuration: USB Mini Type B interface for SYCON.NET software
• Hot-Swappable: Supported on universal backplanes
• Firmware Requirement: RX3i CPU firmware v7.70 or higher

Global PLC Spare HUB’s Insight

The IC695CNM001 is our top recommendation for bridging legacy RX3i controllers with modern CANopen-enabled instrumentation. The module’s support for node guarding and the heartbeat protocol provides a significant layer of operational security, allowing the master to detect field device failures in milliseconds. We particularly favor this module for its "Hot-Swap" capability, which is a critical necessity for non-stop production lines where individual node maintenance is required without halting the entire system.

Diagnostic Capabilities and Applications

• Diagnostics: Real-time health monitoring is provided through PDO mapping status and dedicated NET/MOD status LEDs, ensuring immediate visualization of network integrity.
• Applications: Precision packaging machinery, automated material handling, and multi-axis synchronized drive systems.
• Protocol Mastery: Handles complex network management (NMT) and synchronization objects (SYNC) essential for multi-device harmony.

Logistics and Warranty

• Shipping: Global transit provided by FedEx, UPS, and DHL.
• Dispatch: Guaranteed processing within 24 to 48 hours of order confirmation.
• Warranty: This component is backed by our standard 12-month professional quality warranty.

Professional FAQ

Q: Why is firmware version 7.70 or later mandatory for this module?
A: Later firmware versions include the necessary CANopen object dictionaries and improved timing protocols required to manage the high-speed data frame processing of the IC695CNM001.

Q: Can I use this master module to control more than 5 slave devices by using a gateway?
A: The module is hard-coded for a maximum of 5 native CANopen slave nodes. If your system requires higher node density, consider utilizing a secondary interface or a CANopen-to-EtherNet/IP gateway.

Q: What is the benefit of using the heartbeat protocol vs. node guarding?
A: Heartbeat is more bandwidth-efficient, as the slave sends the status message periodically without requiring a master poll, reducing network traffic load.

Q: Selection Guidance: How do I verify my backplane can handle the 800mA draw?
A: Always perform a power budget calculation for your RX3i rack. Ensure that the total current draw of all modules (including the IC695CNM001) does not exceed the capacity of your rack power supply module.

Q: Troubleshooting Tip: What should I check if the MOD status LED is red?
A: A solid red MOD status typically indicates a configuration mismatch or a hardware communication timeout. Verify your SYCON.NET settings and ensure the cable shielding is correctly grounded to avoid EMI interference.

Tags