Home IC693CPU363 PLC Processor Module GE Fanuc Series 90-30 240KB CPU

IC693CPU363 PLC Processor Module GE Fanuc Series 90-30 240KB CPU

  • Manufacturer: GE

  • Product No.: IC693CPU363

  • Condition: In stock

  • Product Type: CPU Module

  • Product Origin: USA

  • Payment: T/T, Western Union

  • Weight: 1400g

  • Shipping port: Xiamen

  • Warranty: 12 months

Selected quantity: 1
Request a quote

Estimate delivery times: 12-26 days (International), 3-6 days (United States).

Return within 30 days of purchase. Duties & taxes are non-refundable.

Guaranteed Safe Checkout

Visa
PayPal
Mastercard
American Express

System Architecture & Processing Core

The IC693CPU363 operates as a high-speed, single-slot processor module within the GE Fanuc Series 90-30 programmable logic controller platform. Driven by an 80386EX microprocessor running at 25 MHz, this central processing unit executes Boolean logic at a typical scan rate of 0.22 milliseconds per 1K instructions. Engineers deploy this controller to manage complex industrial automation routines, coordinate distributed I/O networks across up to eight baseplates, and facilitate simultaneous data exchanges with HMI, SCADA, and host workstation systems.

Hardware & Memory Specification Matrix

  • Manufacturer & Platform: GE Fanuc | Series 90-30 Programmable Logic Controllers
  • Controller Part Number: IC693CPU363 (Single-slot modular architecture)
  • Microprocessor & Clock Speed: Intel 80386EX architecture operating at 25 MHz
  • Logic Execution Speed: 0.22 ms per 1K of logic for standard Boolean contacts
  • Memory Capacity & Storage: 240 KB configurable user/register memory utilizing RAM for user programs and Flash memory for non-volatile firmware storage
  • Discrete I/O Capacity: Supports up to 2,048 discrete input points and 2,048 discrete output points
  • System Expansion Limits: Manages up to 8 total baseplates, supporting 1 local CPU rack and up to 7 remote or distributed expansion racks
  • Thermal Operating Envelope: Rated for 0 °C to 60 °C (32 °F to 140 °F) ambient operation; -40 °C to 85 °C (-40 °F to 185 °F) storage
  • Backplane Power Draw: Consumes 890 mA nominal current from the +5 VDC backplane power supply rail (note: standard catalog rating is 890 mA)

Communication Ports & Protocol Capabilities

Interface Port Physical Connector Electrical Standard Supported Protocols & Functions
Onboard Serial Port 1 RJ45 Modular Jack RS-232 / RS-485 SNP/SNPX Master/Slave, RTU Slave; operates independently for SCADA or HMI links.
Onboard Serial Port 2 15-Pin Sub-D Connector RS-232 / RS-485 SNP/SNPX Master/Slave, RTU Slave; supports concurrent multi-drop network polling.
Power Supply Port 15-Pin D-Type Female RS-485 SNP/SNPX Slave; dedicated programming interface located behind the power supply hinged door.
Backplane Option Bus Rack Backplane Proprietary Bus Supports optional Ethernet, Profibus, FIP, GBC, GCM, and GCM+ communication modules.

Deployment & Commissioning Practices

  • Slot Allocation: Insert the single-slot IC693CPU363 exclusively into Slot 1 of the main Series 90-30 CPU baseplate immediately adjacent to the power supply module.
  • Firmware Capabilities: Verify firmware Release 9.0 or higher when executing floating-point mathematical instructions or configuring periodic subroutine execution blocks.
  • Memory Partitioning: Allocate internal register memory boundaries during hardware configuration to balance ladder logic storage against %R, %AI, and %AQ data table requirements.
  • Concurrent Port Tuning: Configure Port 1 and Port 2 baud rates and parity settings independently to prevent bus contention when polling third-party Modbus RTU devices alongside local operator panels.

Frequently Asked Questions (FAQ)

Q: How do engineers connect a programming laptop to the power supply serial port without disturbing active HMI communications?

A: Open the hinged door on the front right of the rack power supply to access the 15-pin female RS-485 port, which runs SNP/SNPX slave protocols independently of the two onboard CPU serial ports.

Q: What causes a fault when adding seven remote expansion baseplates to an existing system?

A: Expansion failures typically stem from exceeding maximum cable run distances or failing to terminate the end-of-chain expansion receiver module properly on the eighth total rack.

Q: Can the onboard RJ45 and 15-pin serial ports operate at different baud rates simultaneously?

A: Yes, Port 1 and Port 2 feature independent UART controllers, allowing engineers to run Modbus RTU slave polling on one port while maintaining SNP master communications on the other.

Q: How is user ladder logic retained during an extended facility power outage?

A: While CPU firmware resides safely in non-volatile Flash memory, user logic and register values rely on a lithium backup battery mounted inside the power supply or CPU assembly to maintain RAM contents.

Q: Does the processor require additional hardware to communicate over industrial Ethernet networks?

A: Yes, because the IC693CPU363 lacks an embedded Ethernet port, engineers must install an optional Series 90-30 Ethernet interface module into an available baseplate slot.

System Integration & Inquiry Guidance

When specifying the IC693CPU363 processor for your GE Fanuc Series 90-30 control cabinet, confirm your total +5 VDC backplane current budget and verify whether floating-point math requires firmware Release 9.0. Contact our technical sales team today to request a formal quotation, verify inventory availability, and arrange fast worldwide shipping.

Tags

Q: Are these parts 100% original and new?

A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.

Q: How fast is the shipping to my country?

A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.

Q: Can I get a formal quotation with shipping costs?

A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.

Q: Do you offer discounts for bulk orders?

A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.




12-Month Comprehensive Warranty

Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.

  • Coverage: Functional defects and hardware failures under normal operating conditions.
  • Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.

Returns & Exchange Policy

We offer a 30-day return policy to ensure you receive the exact part your system requires.

  • Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
  • RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
  • Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.

Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.