FS-CCI-HSE-30 Honeywell Industrial Ethernet Cable 30m 1Gbps Red

Product Overview

• The FS-CCI-HSE-30 is a specialized 30-meter Industrial Ethernet cable.
• Optimized for Honeywell RIO systems requiring high-speed deterministic data transfer.
• Supports Gigabit Ethernet (1 Gbps) for seamless automation network performance.
  

Technical Specifications

• Brand: Honeywell
• Model: FS-CCI-HSE-30
• Length: 30 Meters (pre-terminated for industrial use).
• Data Speed: Up to 1 Gbps (Gigabit Ethernet compliant).
• Conductors: 8-conductor, 4-pair 24 AWG high-purity copper.
• Impedance: Balanced 100 Ohm for superior signal stability.
• Voltage Rating: 300 V; tested to 2000 V AC dielectric strength.
• Temperature Range: Operating from -20°C to 60°C.
• Compliance: TIA/EIA-568-B.2 and ISO/IEC 11801 industrial standards.

Configuration Tree

• FS-CCI-HSE-30 Network Interface Cable
  • ∟ Identification: Red High-Visibility PVC Jacket
    • ∟ Safety: IEC 60332-1 Flame Retardant Rating
  • ∟ Interface: Dual RJ45 Industrial Connectors
• ∟ Core: 24 AWG Pure Copper Twisted Pairs

Global PLC Spare HUB's Insight

• The FS-CCI-HSE-30 is a vital component for maintaining high-availability in Honeywell Experion environments.
• Unlike generic patch cables, its 100 Ohm impedance is strictly controlled to prevent RIO communication jitter.
• The Red Jacket serves as a critical visual safeguard in high-density automation cabinets.
• Engineers prefer this pre-terminated solution to avoid the high failure rates associated with field-crimped RJ45 connectors.

Diagnostic Capabilities & Applications

• Network Reliability: Low-attenuation design maintains signal quality across the entire 30-meter span.
• Noise Immunity: Precision twisted-pair architecture rejects electromagnetic interference in industrial zones.
• Typical Scenarios: Connecting Remote I/O racks to C300 controllers or safety managers.
• Equipment Fit: Seamless integration with Honeywell RIO systems and industrial-grade network switches.

Installation & Maintenance

• Bend Radius: Avoid sharp turns; maintain at least 5 times the cable diameter (30mm) to protect conductors.
• Identification: Use the red cabling to clearly mark safety-critical or high-speed data paths.
• Environmental Check: Ensure the PVC jacket is not exposed to temperatures outside the -20°C to 60°C range.
• Physical Security: Utilize cable ties to prevent the weight of the 30m cable from straining the RJ45 ports.

Commercial Logistics

• Warranty Policy: Includes a full 12-month industrial quality guarantee.
• Fast Dispatch: Orders are processed and shipped within 24-48 hours.
• Shipping Partners: Worldwide express delivery via FedEx, UPS, and DHL.
• Package Weight: Approximately 1 kg; carefully coiled to prevent internal kinks.

FAQ and Selection Guidance

• Why should I use the FS-CCI-HSE-30 instead of a standard CAT6 cable?
• Industrial Ethernet requirements are stricter; the FS-CCI-HSE-30 is tested for 2000V dielectric strength and pre-terminated to match Honeywell RIO tolerances.
• Can I cut this cable and re-terminate it to a shorter length?
• It is not recommended, as factory termination ensures the exact 100 Ohm impedance and signal integrity required for 1 Gbps transmission.
• Expert Selection Tip: Why choose the 30-meter version?
• The 30m length provides enough slack for complex routing between separate cabinets while maintaining Gigabit speeds without signal degradation.
• Is the cable jacket resistant to industrial oils?
• The PVC jacket is durable for standard environments; however, for constant oil immersion, additional protective conduit is advised.
• How do I troubleshoot intermittent data packet loss?
• Verify that the cable is not running parallel to high-current AC power lines for long distances, as this can induce noise even in high-quality cables.

Tags