CB2W100-250 Bently Nevada Interconnect Cable 250ft Shielded

Engineering Precision: The CB2W100-250 Interconnect Cable

The CB2W100-250 is a high-performance interconnect cable assembly engineered for demanding industrial vibration monitoring environments. Featuring MIL-C 5015 splash-proof connectors and a durable, yellow Teflon® jacket, this cable provides exceptional signal integrity and environmental resistance. It is specifically designed to bridge the gap between Bently Nevada sensing hardware and monitoring systems with high reliability.

Configuration Breakdown

The CB2W100-250 follows a standardized configuration to ensure compatibility with specific sensor architectures:

• CB2W100 – Cable Specification
  • Connector: MIL-C 5015, 2-Socket, Splash-Proof, Premium Isolated
  • Wiring: 20 AWG, Twisted Pair, Shielded, Yellow Teflon® Jacket
  • Included Hardware: Locking Ring, Adapter Seal, and O-Ring
• -250 – Length Specification: 250 feet (76.2 meters)

Technical Performance Matrix

• Manufacturer: Bently Nevada
• Component ID: CB2W100-250
• Jacket Material: Teflon® (Chemical/Heat Resistant)
• Wire Gauge: 20 AWG (Shielded Twisted Pair)
• Connector Type: MIL-C 5015 (Splash-proof)
• Shipping: Expedited via FedEx, UPS, and DHL
• Warranty: 12-month performance coverage

Global PLC Spare HUB Insight

For site engineers, the CB2W100-250 is the primary choice for long-run signal transmission in petrochemical and power generation facilities. Its low-capacitance design is vital for maintaining high-frequency signal amplitude over its 250ft reach. Our insight indicates this cable is optimized for stationary machinery monitoring where mechanical vibration and exposure to fluids are constant risks.

Expert Technical FAQ

Why is this cable not compatible with the 200350 Accelerometer?
The seal geometry of the CB2W100-250 O-ring does not match the 200350 sensor housing, preventing an IP-rated watertight seal.

How do long cable runs affect frequency response?
At lengths exceeding 30 meters (100 feet), users may observe signal attenuation at very high frequencies; always verify system calibration if using these cables with AM3100T2-Z2 series sensors.

What is the benefit of the yellow Teflon® jacket?
Teflon® provides superior chemical and thermal resistance, ensuring the cable remains flexible and intact in environments that would brittle traditional PVC-jacketed cables.

Is the MIL-C 5015 connector field-repairable?
While the connector is a standard military-grade component, we recommend utilizing the factory-assembled CB2W100-250 to ensure the internal isolation seals remain vacuum-tested and moisture-proof.

Selection Tip: How do I manage cable strain on the sensor end?
Always utilize the included locking ring and adapter seal to ensure the cable weight is supported, preventing tension directly on the connector pins during operation.

Installation Best Practices

• Routing: Keep cable runs away from high-voltage AC lines to prevent induced electromagnetic interference on the twisted-pair signal.
• Hardware: Always verify that the included O-ring is seated correctly in the adapter seal during the initial connection to maintain splash-proof integrity.
• Bend Radius: Avoid sharp bends; maintain a minimum bend radius of 10x the cable diameter to prevent stress on the internal shield.

Tags