Buy 1756-PH75 ControlLogix Power Supply Module by Allen Bradley 125V DC
Manufacturer: Allen-Bradley
Product No.: 1756-PH75
Condition: In stock
Product Type: Power Supply Module
Product Origin: USA
Payment: T/T, Western Union
Weight: 500g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
Executive Summary
Engineered for mission-critical automation nodes, the 1756-PH75 is a high-reliability Allen Bradley ControlLogix DC power supply. Designed to mount seamlessly in any left-side chassis slot, this 1756-PH75 module converts a 90 to 143V DC input into stable, regulated multi-rail backplane power. Built to endure harsh industrial floors, it combines robust 30A surge tolerance with reinforced electrical isolation to safeguard sensitive processors against grid fluctuations.
Engineering Parameters & Architecture
| Performance Metric | Operational Specification |
|---|---|
| Manufacturer & Series | Allen Bradley ControlLogix Series B |
| Module Catalog Number | 1756-PH75 |
| Input Voltage Window | 125V DC nominal (90–143V DC absolute operating range) |
| Power Consumption & Rating | 95W total input; 75W continuous output at 60°C |
| Multi-Rail Output Currents | +1.2V at 1.5A, +3.3V at 4A, +5.1V at 13A, +24V DC at 2.8A |
| Dielectric Isolation Rating | 250V reinforced insulation (tested at 3500V DC for 60 seconds) |
| Transient & Surge Capacity | 30A maximum inrush current surge across input circuit |
| Thermal & Environmental Limits | Operational: 0°C to 60°C (32°F to 140°F); 5–95% non-condensing humidity |
| Mechanical Resilience | 30G operational shock, 50G non-operational shock, 2G vibration |
Deployment & Wiring Best Practices
- Conductor Requirements: Terminate using 2.5 mm2 solid or stranded copper wire equipped with 1.2 mm insulation rated for 90°C (194°F).
- Terminal Torque: Secure screw terminals precisely to 0.8 N•m (7 lb•in) to prevent high-resistance micro-arcing under continuous vibration.
- Chassis Placement: Mount strictly on the left-hand end of compatible 1756-A4, A7, A10, A13, or A17 backplanes to optimize thermal dissipation paths.
- Hold-Up Timing: Accounts for up to 50 ms input voltage delay during brownout conditions before dropping backplane logic rails.
Professional Frequently Asked Questions (FAQ)
Q: How does backplane loading affect thermal dissipation in high-density rack setups?
A: The 1756-PH75 delivers a full 75W output up to 60°C, but drawing near its 13A limit on the 5.1V rail increases internal component thermal stress. Ensure adequate vertical clearance above and below the chassis slot to prevent premature localized hot-spotting.
Q: What specific protective measures guard the backplane logic against high-voltage transients?
A: The unit utilizes a reinforced isolation architecture rated at 250V continuous, factory type-tested at 3500V DC for 60 seconds, effectively decoupling heavy DC bus noise from delicate processor modules.
Q: Why is wire gauge and conductor torque critical during field wiring installation?
A: Using undersized conductors or incorrect torque settings below 0.8 N•m can cause localized terminal heating under full 95W input load, eventually triggering nuisance thermal trips or intermittent brownouts.
Q: Can this module handle sudden DC bus voltage sags without dropping the processor?
A: Yes, the internal circuitry incorporates hold-up capacitance and a maximum 50 ms input delay characteristic to ride through momentary grid sags within the 90–143V DC window.
Q: What maintenance checks should technicians perform during routine panel audits?
A: Verify that terminal screw torque remains at 0.8 N•m, inspect for dust accumulation blocking chassis airflow ventilation slots, and check that backplane alignment pins are fully locked.
Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.



