NFPW442-50 Yokogawa CENTUM Series Power Supply
Manufacturer: Yokogawa
Product No.: NFPW442-50
Condition: In stock
Product Type: Power Supply
Product Origin: SG
Payment: T/T, Western Union
Weight: 500g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
Yokogawa NFPW442-50 Power Supply Module
The Yokogawa NFPW442-50 is an AC-input power supply module designed for compatible Yokogawa control system installations. It accepts a nominal 220–240 V AC supply and provides a regulated +5.1 V DC output for system electronics.
The module also provides a separate 24 V DC analog field power supply path. Its electrical protection functions include overvoltage protection, overcurrent protection and input-side protection. A duplex configuration is possible when the module is installed on the specified NFBU200 base module.
With a rated output of 40 W and a peak output capability of 60 W, the NFPW442-50 is intended for applications requiring stable DC power within a Yokogawa system architecture.
01 | Model Identification and Configuration Breakdown
| Code Section | Code | Description |
|---|---|---|
| Base Model | NFPW442 | Power Supply Module |
| Input Voltage Code | 442 | 220–240 V AC input model designation |
| Suffix Code | -5 | Standard type without explosion protection |
| Option Code | 0 | Basic type |
Complete model: NFPW442-50
Configuration Breakdown
- NFPW442 – Yokogawa power supply module for 220–240 V AC input.
- -5 – Standard type without explosion protection.
- 0 – Basic type.
Selection note: When ordering a replacement, compare the complete model designation, including suffix and option codes. Do not select the module based only on the NFPW442 base model.
02 | AC Input Performance
| Parameter | Specification |
|---|---|
| Rated Input Voltage | 220–240 V AC |
| Input Voltage Range | 170–264 V AC (rms) |
| Input Frequency | 47–66 Hz |
| Rated Frequency | 50/60 Hz |
| Maximum Input Current | 0.7 A |
| Fuse Rating | 3.15 A |
| Maximum Inrush Current | 90 A for 5 ms or less |
| Maximum Leakage Current | 1 mA |
| Withstanding Voltage | 3,000 V AC for 1 minute |
| Insulation Resistance | 50 MΩ at 500 V DC |
| Momentary Power-Failure Immunity | 10 ms at 80% condition |
03 | Main DC Output – +5.1 V Rail
The primary output supplies the DC power required by compatible system electronics. Its rated output current is 7.8 A, with a specified peak current of 11.8 A.
| Output Parameter | Value |
|---|---|
| Rated Output Voltage | +5.1 V DC |
| Rated Output Current | 0–7.8 A |
| Peak Output Current | 11.8 A |
| Total Rated Output Power | 40 W |
| Peak Output Power | 60 W |
| Overvoltage Protection | Maximum 7 V |
| Overcurrent Protection | Minimum 105% |
| Overcurrent Response | Shutdown after 4–14 seconds of sustained overcurrent |
| Startup Time | Maximum 300 ms after power-on |
| Restart Time After 200 ms Power Failure | Maximum 100 ms under rated input conditions |
04 | Analog Field Power Supply
In addition to the primary DC output, the NFPW442-50 provides an analog field power supply input and output path. This supports compatible field-power requirements within the control system configuration.
| Parameter | Specification |
|---|---|
| Rated Input Voltage | 24 V DC ±10% |
| Maximum Input Current | 4 A |
| Input Fuse Rating | 6.3 A |
| Rated Output Voltage | Input voltage minus matching-diode voltage drop |
| Rated Output Current | 4 A |
| Output Overvoltage Protection | 35 V |
Engineering consideration: The analog field power output is not a fixed 24 V DC output under all conditions. Its voltage depends on the applied input voltage and the matching-diode voltage drop.
05 | Redundancy and System Integration
| Configuration Item | Specification |
|---|---|
| Duplex Configuration | Supported |
| Required Base Module | NFBU200 |
| Installation Condition | Duplex arrangement when installed on the specified base module |
The NFPW442-50 can be used in a duplex power supply arrangement when installed on an NFBU200 base module. Engineers should verify the complete base configuration, wiring arrangement and system power requirements before commissioning.
06 | Mechanical Specifications
| Manufacturer | Yokogawa |
| Model | NFPW442-50 |
| Product Type | Power Supply Module |
| Input Type | 220–240 V AC |
| Width | 49.7 mm |
| Height | 130 mm |
| Depth | 146.5 mm |
| Dimensions (W × H × D) | 49.7 × 130 × 146.5 mm |
| Weight | 0.6 kg |
07 | Commissioning and Maintenance Guide
- Confirm the model code: Verify NFPW442-50 and check the suffix and option configuration against the existing installation.
- Measure AC input: Confirm that the supply remains within 170–264 V AC rms and that the input frequency is within 47–66 Hz.
- Check input protection: Inspect the specified fuse rating and verify that the upstream protection is suitable for the installation.
- Review DC load demand: Calculate the total +5.1 V load current. Check both steady-state demand and any temporary startup peaks.
- Inspect analog field power: Confirm the external 24 V DC input and check the connected load against the 4 A output rating.
- Verify duplex installation: If redundancy is required, confirm that the module is installed on the NFBU200 base and that the system wiring supports the intended arrangement.
- Monitor restart behavior: During controlled testing, check output recovery after power interruption against the specified startup characteristics.
Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.



