Home 1797-PS1E Allen-Bradley 1797 FLEX I/O Ex Power Supply

1797-PS1E Allen-Bradley 1797 FLEX I/O Ex Power Supply

  • Manufacturer: Allen-Bradley

  • Product No.: 1797-PS1E

  • Condition: In stock

  • Product Type: Power Supply Module

  • Product Origin: USA

  • Payment: T/T, Western Union

  • Weight: 500g

  • Shipping port: Xiamen

  • Warranty: 12 months

Selected quantity: 1
Request a quote

Estimate delivery times: 12-26 days (International), 3-6 days (United States).

Return within 30 days of purchase. Duties & taxes are non-refundable.

Guaranteed Safe Checkout

Visa
PayPal
Mastercard
American Express

Allen-Bradley 1797-PS1E – FLEX Ex Power Supply

The Allen-Bradley 1797-PS1E is an AC-powered supply module in the FLEX I/O 1797 FLEX Ex product family. It converts a wide-range AC input into four DC output channels for compatible intrinsically safe field-device circuits.

Designed for hazardous-area automation installations, the module combines galvanically isolated outputs, independent intrinsic-safety current limitation and an IP65-rated enclosure. Its increased-safety input and output terminations support field wiring in demanding industrial environments.

Unlike a conventional control-cabinet power supply, the 1797-PS1E must be evaluated as part of the complete hazardous-area installation. Output circuit classification, wiring practices, grounding and environmental conditions all affect whether the installation remains suitable for its intended area.

Power Distribution Profile

Parameter Specification
Input Voltage 85–253 V AC
Input Frequency 47–63 Hz
Input Power 55 W
Current Consumption 0.9 A (as specified)
Output Voltage 9.5 V DC
Output Channels 4
Output Power Rating 8.5 W per output
Total Rated Output Power 34 W, based on four 8.5 W channel ratings
Output Terminals Terminals 10–17
Input Power Terminals Terminals 1, 2, 4 and 5 (including protective earth connection)

Four-Channel Output Architecture

The module provides four independently intrinsically safe-limited output channels. Each channel has an individual output power rating of 8.5 W, allowing power distribution to compatible field circuits.

  • Four output channels: Provides separate power connections for supported field loads.
  • Galvanic isolation: Output power is galvanically isolated from the source, according to the supplied specification.
  • Independent IS limitation: Each output is independently limited for intrinsic-safety applications.
  • Output voltage: 9.5 V DC nominal, as specified.
  • Terminal arrangement: Output connections use terminals 10 through 17.

Important: The 8.5 W rating applies to each output channel. Actual usable load capacity must also account for the equipment connected to each circuit and the applicable installation requirements.

Hazardous-Area Construction and Wiring

Construction Detail Specification
Enclosure Protection IP65
Input Cable Gland M20 × 1.5
Input Cable Diameter 6–12 mm
Output Cable Gland M16 × 1.5
Output Cable Diameter 4–8 mm
Input Termination Increased-safety connection
Output Termination Increased-safety connection
Output Isolation Galvanic isolation from source

The sealed cable entries provide defined cable-diameter ranges for input and output wiring. Correct gland selection and cable installation are essential to maintaining the enclosure's specified protection level.

Installation Environment and Area Classification

Operating Temperature -20°C to +70°C
Protection Rating IP65
Hazardous-Area Application Zone 1 and Zone 22, subject to applicable certification and installation conditions
Zone 22 Classification Category 3D, as stated in the supplied product information
Maximum Input Voltage 253 V AC
Maximum Permitted Voltage, Um 253 V AC

For operation at an ambient temperature of 60°C, the supplied installation information specifies power supply leads rated for an 80°C service temperature.

Hazardous-area suitability must be confirmed against the product nameplate, applicable certificates and the current installation standards. The area classification alone does not establish approval for every installation.

Mechanical and Electrical Characteristics

Product Line FLEX I/O 1797
Product Family FLEX Ex
Manufacturer Allen-Bradley / Rockwell Automation
Part Number 1797-PS1E
Product Type AC Input / Quad Ex DC Output Power Supply
Input Power 55 W
Power Dissipation 21 W
Thermal Dissipation 71.67 BTU/hr
Weight See verification note below
UPC 612598182961
Approximate Dimensions 5.51 × 6.9 × 11.0 inches

Field Installation: Points That Matter

  1. Mounting and bonding: Use suitable mounting hardware. Star washers and nuts are recommended in the supplied installation guidance to establish reliable electrical contact.
  2. Grounding surface: Where grounding bolts are used, remove paint or coating from the designated sub-panel contact area to maintain electrical continuity.
  3. Input wiring: Connect the AC supply to the specified input terminals and observe the maximum permitted voltage.
  4. Output wiring: Route the four output circuits through the specified cable entries. Follow the approved terminal arrangement and intrinsic-safety wiring rules.
  5. Ferrite installation: The supplied guidance recommends routing power supply output wires through the ferrite bead before connecting them to the module.
  6. ESD protection: Protect the device against electrostatic discharge during handling and maintenance. Use suitable ESD precautions and identification signage where required.
  7. Temperature verification: Check the actual ambient temperature and select wiring with the required temperature rating.

Daisy-Chain Power Planning

The supplied product information identifies daisy-chain connection as an available arrangement when the total module power draw remains below 8.5 W. If the load exceeds this stated condition, individual power supplies are recommended.

Before designing a daisy-chain arrangement, verify the applicable Rockwell Automation wiring diagram and power-budget rules. Do not interpret the 8.5 W per-output rating as permission to exceed the documented supply or circuit limits.

Application Areas

  • FLEX Ex distributed I/O installations
  • Hazardous-area field-device power distribution
  • Industrial process monitoring and control systems
  • Zone 1 and Zone 22 applications where the installed equipment and certification permit
  • Systems requiring galvanically isolated, intrinsically safe output circuits

Tags

Q: Are these parts 100% original and new?

A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.

Q: How fast is the shipping to my country?

A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.

Q: Can I get a formal quotation with shipping costs?

A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.

Q: Do you offer discounts for bulk orders?

A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.




12-Month Comprehensive Warranty

Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.

  • Coverage: Functional defects and hardware failures under normal operating conditions.
  • Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.

Returns & Exchange Policy

We offer a 30-day return policy to ensure you receive the exact part your system requires.

  • Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
  • RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
  • Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.

Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.