Bently Nevada 330104-00-04-50-02-05 3300 XL Eddy Current Probe
Manufacturer: My Store
Product No.: 330104-00-04-50-02-05
Condition： In stock
Product Type: Proximity Probe
Product Origin: USA
Payment: T/T, Western Union
Weight: 323g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
Product Overview
Global PLC Spare HUB Review: Global PLC Spare HUB provides premium industrial automation hardware designed for critical turbomachinery protection systems. The Bently Nevada 330104-00-04-50-02-05 belongs to the advanced 3300 XL series. Engineers deploy this 8 mm proximity probe in heavy industrial environments to measure vibration and displacement accurately. High-precision eddy current technology ensures reliable shaft telemetry for steam turbines, compressors, and large generators.
Technical Specifications
| Brand | Bently Nevada |
| Manufacturer Part Number | 330104-00-04-50-02-05 |
| Product Series | 3300 XL 8 mm Proximity Probes, Metric |
| Measurement Range / Linear Range | 0.25 mm to 2.3 mm (10 mils to 90 mils) with linear output from -1 to -17 Vdc |
| Frequency Response | Zero to 10 kHz with standard field wiring lengths |
| Sensitivity | 7.87 V/mm (200 mV/mil) nominal output |
| Resolution | High-resolution displacement sensing for sub-micron vibration tracking |
| Temperature Range | -52°C to +177°C (-62°F to +350°F) for standard probe tip |
| Environmental Tolerance | Withstands up to 93% relative humidity per IEC 68-2-3 without losing calibration |
| Interference Resistance | Protected by braided stainless steel armor and shielded triad cabling |
Installation Guide
- Mount the 330104-00-04-50-02-05 probe using the M10 x 1 thread into the machinery casing.
- Ensure maximum thread engagement does not exceed 15 mm to prevent structural damage.
- Set the recommended initial radial vibration gap to -9 Vdc, which equals approximately 1.27 mm or 50 mils from the target.
- Connect the miniature coaxial ClickLoc connector securely to the compatible 5-meter Proximitor sensor.
- Run a 3-conductor shielded triad field cable with tinned wiring up to a maximum distance of 305 meters to the monitor.
Commissioning and Maintenance Convenience
The 3300 XL design simplifies setup through exact metric threading and positive-lock miniature connectors. Technicians verify DC resistance easily across the center and outer conductors, expecting a nominal 8.73 ohms for the 5-meter cable length. Viton O-rings maintain rigorous pressure seals between the probe tip and case without requiring complex adjustments during startup.
Compatibility Notes
This specific unit pairs exclusively with a 5-meter Bently Nevada Proximitor sensor. Mixing mismatched cable lengths distorts output voltage scaling. Field wiring must utilize approved 16 to 24 AWG shielded cables to preserve signal integrity across high-frequency ranges.
Certification Information
The 330104-00-04-50-02-05 carries comprehensive hazardous area approvals. It complies with CSA, ATEX, and IECEx standards. Certified installations support intrinsic safety via zener barriers or galvanic isolators for Class I Zone 0 and Division 1 environments, as well as non-incendive ratings for Zone 2 and Division 2 locations.
Package Contents and Warranty
Each shipment includes one factory-sealed Bently Nevada 330104-00-04-50-02-05 proximity probe with integrated armored cable and ClickLoc connector. Global PLC Spare HUB backs this hardware with a comprehensive 12-month warranty.
Logistics and Delivery
Global PLC Spare HUB dispatches all orders within 24 to 48 hours. Reliable international carriers including FedEx, UPS, and DHL deliver industrial spares directly to your facility.
Typical Application Scenarios and Diagnostic Capability
Industrial facilities utilize the 330104-00-04-50-02-05 within critical machinery protection systems. Typical applications include monitoring radial vibration, axial position, and rotor dynamics on large steam turbines, centrifugal compressors, hydroelectric generators, and boiler feed pumps. Advanced diagnostic capabilities detect shaft misalignment, unbalance, bearing wear, and oil whirl before catastrophic mechanical failure occurs.
Frequently Asked Questions
Can I connect this 5-meter probe to a 1-meter Proximitor sensor?
No. The 330104-00-04-50-02-05 requires a matched 5-meter Proximitor sensor to maintain proper system calibration and linear voltage output.
What causes premature failure of the probe pressure seal?
Exposing the probe assembly to ambient temperatures below -34°C (-30°F) compromises the Viton O-ring seal integrity and may cause premature failure.
How do I verify probe health during routine maintenance?
Measure the DC resistance between the center conductor and outer conductor using a multimeter. Expect a nominal reading of 8.73 ohms with a plus or minus 0.50 ohm tolerance.
Buying Guide
When selecting proximity transducers for rotating machinery, verify your machine's physical mounting thread size, extension cable length, and hazardous area classification. Matching the exact model code, such as the 330104-00-04-50-02-05, guarantees seamless integration with existing monitoring racks and prevents costly signal calibration errors.
Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.
People Also Bought
