990-08-50-02-01 Bently Nevada 990 Vibration Transmitter 990 Series

Engineering Architecture & Configuration Breakdown

The 990-08-50-02-01 unit manufactured by Bently Nevada represents an advanced 990 Vibration Transmitter from the trusted 990 Series. This loop-powered transmitter processes signals directly from a non-contacting probe to deliver a proportional 4-20 mA output for PLC or DCS integration.

• Base Series: 990 – Compact Machinery Vibration Transmitter Platform
• Full-Scale Range Option (-08): 0-8 mils pp (0-200 μm pp) peak-to-peak displacement span
• System Length Option (-50): 5.0 meters (16.4 feet) total calibrated electrical length
• Mounting Option (-02): Rugged bulkhead screws for secure surface or panel fastening
• Agency Approval Option (-01): CSA Division 2 hazardous area classification

Electrical & Performance Specifications

Industrial Applications & Rotary Machinery

• Compact Industrial Turbines: Monitors shaft vibration on smaller steam turbines where rack space is restricted.
• Centrifugal Pumps & Blowers: Tracks radial vibration parameters on continuous-duty balance machinery.
• Gearboxes & Industrial Compressors: Measures high-frequency mechanical displacement in harsh plant skids.

Diagnostic Capabilities & Signal Processing

• Direct PLC Integration: Feeds real-time 4-20 mA vibration loops straight into distributed control systems without bulky monitor racks.
• Built-In Diagnostic BNC Output: Provides local Proximitor sensor output port supporting up to 3 meters (10 feet) of auxiliary cable connection for portable analyzers.
• Non-Interacting Calibration: Allows quick zero and span tuning adjustments during scheduled maintenance windows.

Global PLC Spare HUB's Insight

For plant operators looking to streamline vibration monitoring without investing in a full 3500 rack infrastructure, the 990-08-50-02-01 offers a robust, self-contained solution. When installing this transmitter in Division 2 hazardous locations, field technicians must verify that total loop resistance—including field wiring—does not exceed 1,000 ohms at 35 Vdc. Maintaining the probe gap strictly between 20 and 55 mils ensures the linear output voltage matches the 0-8 mils pp full-scale span without signal clipping. Additionally, utilizing the front BNC connection during routine walkarounds lets maintenance crews capture raw dynamic waveforms instantly.

Logistics, Packaging & Warranty Terms

• Condition Status: 100% New & Original factory sealed inventory.
• Factory Warranty: Complete 12 Months warranty coverage included.
• Dispatch Lead Time: Rapid 24 to 48 hour order handling and dispatch.
• Express Global Shipping: Fast door-to-door delivery via FedEx, UPS, and DHL.

Frequently Asked Questions

How does the transmitter signal a sensor fault or NOT OK condition?

The signal output drops below 3.6 mA within 100 microseconds whenever an open circuit or transducer fault occurs, and automatically restores normal output within 2 to 3 seconds after fault removal.

What target size is required to achieve accurate displacement readings?

The monitored shaft or target must have a minimum diameter of 9.5 mm (0.375 inches) to ensure proper eddy current field formation and linear accuracy.

Can I connect a portable diagnostic recorder directly to this transmitter?

Yes, the unit features a built-in BNC connector for the Proximitor Sensor output, allowing connection of diagnostic test gear up to 3 meters (10 feet) away.

What selection factors guide the choice of the -08 full-scale option?

Choose option -08 when your machinery vibration monitoring profile requires a specific 0 to 8 mils peak-to-peak (0 to 200 micrometers pp) measurement ceiling.

Why is bulkhead mounting preferred for the -02 hardware configuration?

Bulkhead mounting options provide a secure, vibration-resistant mechanical anchorage directly onto control panel backplanes or enclosure walls, minimizing secondary mechanical resonance.

Tags