330877-080-37-05 3300 XL Series Bently Nevada Extension Cable

Product Overview

The 330877-080-37-05 is a high-performance 3300 XL 50 mm Extension Cable engineered for seamless signal transmission. Designed by Bently Nevada, this cable maintains strict electrical impedance and thermal stability in extreme industrial settings. Please refer to the system manual to match cable lengths with your existing Proximitor sensor for optimal signal calibration.

Configuration Hierarchy

• Part Number: 330877
  • -080 (Cable Length): 8.0 meters (26.2 feet)
  • -37 (Armor/Cable Option): FluidLoc extension cable with stainless steel armor
  • -05 (Agency Approval): Multiple hazardous area approvals

Technical Specifications

• Cable Type: 75 Ω Triaxial, PFA insulated FluidLoc
• Resistance (Center to Coaxial): 2.0 ± 0.5 Ω
• Resistance (Coaxial to Coaxial): 0.6 ± 0.2 Ω
• Temperature Range: -51°C to +200°C (-31°F to +392°F)
• Certifications: EMC 2014/30/EU, RoHS 2011/65/EU, FCC Part 15, ABS Maritime
• Shipping: 24-48 hour dispatch via FedEx, UPS, or DHL
• Warranty: 12-month factory quality assurance

Global PLC Spare HUB's Insight

The 330877-080-37-05 serves as the backbone of reliable machinery protection systems. Global PLC Spare HUB recommends this cable for high-vibration applications such as centrifugal compressors and critical pump trains. Its FluidLoc technology effectively prevents oil and process fluid wicking, a common failure mode in legacy cabling. This improves diagnostic accuracy by maintaining a low noise floor, ensuring precise FFT spectral analysis of rotating shafts.

Professional FAQ

Q: Does the 8.0m length include the probe lead?
A: No. The probe length and extension cable length must be summed to equal the total calibrated length of your Proximitor system.

Q: What is the primary advantage of FluidLoc cabling in this model?
A: It features a specialized internal sealant that stops fluid from traveling inside the cable jacket, protecting terminal blocks from contamination.

Q: Can I use this with non-3300 XL series probes?
A: While optimized for the 3300 XL platform, please verify your Proximitor's calibration chart to ensure impedance matching.

Q: How does the SST armor affect signal noise?
A: The stainless steel armor provides robust mechanical protection without compromising the high-frequency response required for vibration diagnostics.

Q: Selection Guide: When is the 8.0m option necessary?
A: Opt for the 8.0m length when the Proximitor mounting location is separated from the machine casing to protect electronics from extreme heat or high-vibration zones.

Installation & Maintenance

For professional results, avoid sharp bending radii near the connector interface. Ensure all connections are finger-tight, followed by a slight torque to prevent signal impedance fluctuations. Periodic resistance testing between conductors is highly recommended during annual outages to confirm the integrity of the PFA insulation layer.

Tags