330130-045-03-05 Bently Nevada 3300 XL Extension Cable

Global PLC Spare HUB's Insight

Instrumentation engineers often encounter signal attenuation and connector corrosion when routing traditional cabling across large mechanical skids. During the refit of a multi-stage centrifugal compressor train, replacing degraded intermediate wiring with the 330130-045-03-05 Bently Nevada 330130-045-03-05 3300 XL Extension Cable restored the baseline DC voltage and eliminated erratic shaft vibration alarms. The patented TipLoc and CableLoc design guarantees mechanical integrity under high-frequency G-forces.

Product Overview

The 330130-045-03-05 Bently Nevada 330130-045-03-05 3300 XL Extension Cable links proximity probes to proximitor sensors with minimal signal loss. Manufactured in the U.S.A., this armored 4.5-meter cable features superior shielding and agency approvals for hazardous zones. Every unit includes a 12-month warranty and ships within 24 to 48 hours via FedEx, UPS, and DHL.

Configuration Breakdown & Suffix Options

• Base Model: 330130 - 3300 XL Extension Cable Assembly
• Cable Length Suffix (-045): 4.5 meters (14.8 feet) total intermediate span
• Armor & Connector Option (-03): Armored cable housing with physical connector protector
• Agency Approvals (-05): Certified for CSA, ATEX, and IECEx hazardous environments

Technical Specifications

Installation Guide

• Route the armored cable maintaining clearance from high-voltage motor power lines.
• Secure the ClickLoc connectors hand-tight to prevent intermittent ground loops.
• Utilize the included connector protector instead of silicone tape if exposure to turbine lubricating oil is expected.
• Terminate field wiring using a three-conductor shielded triad cable up to 305 meters maximum distance.

Debugging and Maintenance Convenience

• Measure loop resistance using a precision multimeter to verify center and outer conductor integrity against baseline values.
• Inspect armor casing for pinching or localized crushing following mechanical maintenance cycles.
• Check proximitor output voltage to ensure the supply remains within the -23 Vdc to -26 Vdc operating window.

Certification Information

• Fully certified under CSA, ATEX, and IECEx standards for explosive gas atmospheres.
• Compliant with IEC standard 68-2-3 humidity endurance protocols.

Package Contents and Warranty

• One 330130-045-03-05 Bently Nevada 330130-045-03-05 3300 XL Extension Cable in factory packaging.
• Connector protector sleeve and backup silicone tape strip.
• Comprehensive 12-Month Factory Warranty document.
• Global priority express shipping via FedEx, UPS, and DHL.

Typical Application Scenarios and Diagnostic Capabilities

• Critical steam and gas turbine supervisory monitoring systems.
• Heavy industrial process compressors operating in explosive environments.
• Radial and axial shaft displacement tracking systems for large gearboxes.
• Real-time machinery diagnostics identifying rotor unbalance and fluid whirl.

Frequently Asked Questions

Q: Can silicone tape be used on the 330130-045-03-05 cable connections near turbine bearings?

• A: No, silicone tape is not recommended if the connection is exposed to turbine oil; use the physical connector protector instead.

Q: What is the exact DC resistance threshold for the center conductor on this 4.5-meter variant?

• A: The nominal center conductor resistance must measure 0.99 ± 0.15 ohms at ambient temperature.

Q: Does the 330130-045-03-05 require specific power supply parameters at the monitor rack?

• A: Yes, the system requires -17.5 Vdc to -26 Vdc for nonincendive installations, or -23 Vdc to -26 Vdc when using safety barriers.

Q: What is the maximum allowable cable run between the proximitor sensor and the monitor?

• A: The maximum field wiring length is restricted to 305 meters (1,000 feet) using proper triad shielding.

Q: How does the armored option protect against mechanical damage on plant floors?

• A: The integrated stainless steel armor provides robust defense against crushing loads, sharp metal edges, and heavy foot traffic.

Buying Guide & Selection Advice

When selecting intermediate wiring for vibration monitoring loops, verify that your probe tip length and proximitor sensor generation match the 3300 XL platform specification. Always choose armored variants like the 330130-045-03-05 Bently Nevada 330130-045-03-05 3300 XL Extension Cable when routing cables through harsh, unmanaged industrial cable trays to guarantee long-term signal fidelity.

Tags