190501-12-99-00 Bently Nevada Velocity Sensor for Machinery Monitoring
Manufacturer: Bently Nevada
Product No.: 190501-12-99-00
Condition： In stock
Product Type: Velomitor CT Transducer
Product Origin: USA
Payment: T/T, Western Union
Weight: 297g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
190501-12-99-00 Bently Nevada Velomitor CT Velocity Transducer
190501-12-99-00 is an industrial velocity transducer designed for continuous machinery vibration monitoring.
The sensor belongs to the trusted Bently Nevada Velomitor CT monitoring family.
The transducer converts vibration velocity into stable electrical output signals.
Engineers deploy this sensor in rotating equipment protection and predictive maintenance systems.
The design combines wide frequency response, high environmental durability, and stable output performance.
Configuration Breakdown
| Model Structure | Description |
| 190501 | Velomitor CT Velocity Transducer Base Model |
| 12 | Plate Stud 3/8-in 24 to M8x1 Mounting Hardware |
| 99 | Unit with Included 32-foot Cable |
| 00 | Standard Version Without Additional Agency Approval |
Technical Performance Profile
| Brand | Bently Nevada |
| Model | 190501-12-99-00 |
| Product Type | Velomitor CT Velocity Transducer |
| Manufacturing Origin | United States |
| Sensitivity | 3.94 mV/mm/s ±5% |
| Frequency Response | 3 Hz to 900 Hz ±1 dB |
| Extended Frequency Range | 1.5 Hz to 1 kHz ±3 dB |
| Amplitude Linearity | ±2% to 63.5 mm/s peak |
| Transverse Response | Less than 5% |
| Output Bias Voltage | 10.1 VDC ±1 VDC |
| Dynamic Output Impedance | Below 400 Ω typical |
| Mounted Resonant Frequency | 9 kHz minimum |
| Broadband Noise | 0.229 mm/s peak |
| Maximum Cable Length | 305 meters |
Environmental and Mechanical Characteristics
- Operating Temperature: -40°C to +85°C
- Storage Temperature: -40°C to +100°C
- Shock Resistance: 5000 g peak maximum
- Humidity Resistance: 100% condensing tolerance
- Magnetic Field Susceptibility: Less than 0.0068 mm/s/gauss
- Housing Material: 316L stainless steel
- Connector Type: 2-pin MIL-C5015 connector
- Mounting Surface Diameter: 33 mm
- Sensor Height: 82 mm
- Mounting Torque: 4.5 N-m ±0.6 N-m
- Installation Orientation: Any mounting angle supported
- Weight: 0.297 kg typical
Signal Integrity and Diagnostic Capability
- Provides stable vibration velocity output under dynamic load conditions
- Supports continuous rotating machinery health monitoring
- Maintains signal integrity over long cable distances
- Detects abnormal vibration growth in critical assets
- Improves predictive maintenance efficiency
- Supports trend analysis within machinery protection systems
- Reduces false alarms through controlled transverse sensitivity
- Supports high-noise industrial environments effectively
Suitable Equipment and Industrial Applications
- Steam turbine monitoring systems
- Gas turbine vibration protection
- Industrial compressor monitoring
- Large rotating motor diagnostics
- Pump vibration analysis systems
- Cooling tower fan monitoring
- Power generation equipment
- Petrochemical rotating machinery
- Mining process equipment monitoring
- Condition-based maintenance systems
Intrinsic Safety and Hazardous Area Capability
The 190501 series supports intrinsically safe installation configurations.
- Supports Ex ia IIC T4 hazardous area applications
- Supports Class I Division 1 installation environments
- Supports Class II Groups E, F, and G areas
- Supports non-incendive industrial installation requirements
- Supports hazardous area machinery monitoring systems
Global PLC Spare HUB's Insight
190501-12-99-00 performs reliably in high-vibration industrial environments.
The sensor maintains stable output during long-term continuous machinery operation.
Its stainless steel housing improves durability in corrosive industrial locations.
The extended frequency response supports accurate low-speed and high-speed machine monitoring.
Field engineers often select this model for turbine and compressor protection systems.
The transducer integrates efficiently with industrial vibration monitoring platforms.
Installation and Field Deployment Notes
- Install on rigid mounting surfaces for accurate vibration transfer
- Use specified mounting torque during installation
- Separate sensor cable from high-voltage wiring paths
- Verify polarity before system commissioning
- Use shielded routing practices in high EMI environments
- Inspect connector sealing during outdoor installation
Packaging and Shipping Support
- Professional anti-static packaging included
- Industrial protective packing applied before shipment
- FedEx international shipping available
- UPS priority logistics support available
- DHL express delivery available worldwide
- Most orders dispatch within 24–48 hours
Warranty and Service Commitment
- 12-month warranty included
- Technical support available after delivery
- Pre-shipment inspection completed before dispatch
- Industrial export packaging standard applied
Professional FAQ
-
Why is low transverse response important in vibration monitoring?
Low transverse sensitivity improves measurement accuracy during multi-axis machine vibration conditions.
-
When should engineers select a velocity transducer instead of an accelerometer?
Velocity transducers suit rotating equipment requiring overall vibration severity monitoring.
-
How does stainless steel housing benefit field applications?
316L stainless steel improves corrosion resistance in harsh industrial environments.
-
What installation practice improves signal reliability most effectively?
Use rigid mounting surfaces and separate sensor cables from power wiring routes.
-
What should buyers verify before selecting 190501-12-99-00?
Confirm mounting thread compatibility, monitoring frequency range, cable distance, and hazardous area requirements.
Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.
People Also Bought
