TM5SAI2L Schneider Electric Modicon TM5 2-Channel Analog Input Module
Manufacturer: Schneider Electric
Product No.: TM5SAI2L
Condition: In stock
Product Type: Analog Input Module
Product Origin: FR
Payment: T/T, Western Union
Weight: 500g
Shipping port: Xiamen
Warranty: 12 months
Estimate delivery times: 12-26 days (International), 3-6 days (United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
Guaranteed Safe Checkout
Hardware Profile & Signal Acquisition Architecture
Control engineers integrate the TM5SAI2L Schneider Electric Modicon TM5 2-channel analog input module into distributed I/O slices to digitize continuous process variables with high speed and minimal panel footprint. Each channel operates independently under software configuration, accepting ±10 Vdc bipolar voltage or 0–20 mA / 4–20 mA current loops at 12-bit signed resolution. Built-in hardware diagnostics continuously evaluate wire breaks, out-of-range limits, and bus health across Modicon M241, M251, M258, and LMC058 automation architectures.
| Engineering Domain | Technical Parameter | Rated Specification |
|---|---|---|
| Identification | Manufacturer, Model & Series | Schneider Electric TM5SAI2L (Modicon TM5 Series) |
| Signal Acquisition | Channels & Signal Types | 2 Channels; ±10 Vdc, 0–20 mA, 4–20 mA (per-channel software configurable) |
| Conversion | Resolution & Accuracy | 12-bit signed (-32768 to +32767); ±0.3% FS @ 25 °C (±0.5% FS max) |
| Timing & Filtering | Sampling & Response Time | 1 ms or 300 µs/channel sampling; 200 µs offset; filter off or levels 2–128 |
| Isolation | Dielectric Strength | 500 Vrms AC (channels to TM5 bus); non-isolated between channels |
| Power & Bus Load | Supply & Current Consumption | 24 Vdc supply (0.81 W total); 2 mA @ 5 V DC bus; 5 mA @ 24 V DC bus |
| Environment | Thermal Span & Protection | 0 °C to +55 °C operating; -25 °C to +70 °C storage; IP20 ingress |
| Physical & Lifecycle | Dimensions, Mass & Status | 99 × 12.5 × 75 mm; 0.025 kg ultra-lightweight slice; Active lifecycle |
Diagnostic Capabilities & Integration Advantages
- Per-Channel Software Flexibility: Eliminates hardware DIP switches by letting programmers mix voltage and current sensors across Channel 0 and Channel 1 directly inside EcoStruxure Machine Expert.
- Granular Fault Diagnostics: Reports real-time status flags including 4–20 mA open-wire detection, upper/lower threshold breaches, ModuleOK, DcOk, and NetworkOk directly to PLC registers.
- Configurable Digital Filtering: Adjustable low-pass filter levels (2 through 128) suppress high-frequency process noise without sacrificing rapid 300 µs conversion cycles when fast loop response is critical.
- Ultra-Dense Slice Packaging: Measures just 12.5 mm wide and weighs 25 grams, maximizing I/O density inside compact machine-mounted junction boxes.
Field Engineering FAQ
Q1: How does the lack of channel-to-channel isolation affect wiring two separate sensors to the TM5SAI2L?
A1: Because both channels share a common internal reference potential, connecting two grounded sensors with different ground potentials creates a ground loop error. Use signal isolators or floating ungrounded transmitters when wiring multiple channels simultaneously.
Q2: How do I configure the 4–20 mA open-wire break diagnostic in EcoStruxure Machine Expert?
A2: Select the 4–20 mA input range in the I/O configuration tree; the firmware automatically flags a wire-break fault whenever loop current drops below roughly 3.6 mA, allowing your PLC logic to trigger a safe fallback routine.
Q3: When should I choose the 300 µs sampling rate over the standard 1 ms sampling rate?
A3: Enable the 300 µs fast sampling mode for high-speed dynamic applications such as hydraulic cylinder pressure profiling or web tension control, while keeping standard 1 ms sampling with higher digital filtering for slow thermal or tank level loops.
Q4: Can I mount this electronic slice directly onto a DIN rail without additional bus components?
A4: No, the TM5SAI2L is an electronic insert module that requires a compatible Modicon TM5 bus base and a 12-pin removable terminal block to complete the backplane power and field wiring connections.
Q5: Why does my ±10 Vdc input reading show slight offset drift near the upper 55 °C cabinet limit?
A5: Analog front-end reference components experience minor thermal drift across ambient extremes, shifting accuracy from ±0.3% FS at 25 °C to ±0.5% FS at 55 °C. Maintain adequate cabinet ventilation and keep high-heat power supplies separated from analog slices.
Tags
Q: Are these parts 100% original and new?
A: Yes. Every component is guaranteed to be 100% original, brand-new, and factory-sealed. We also provide a 12-month comprehensive warranty for your peace of mind.
Q: How fast is the shipping to my country?
A: For in-stock items, we offer same-day dispatch. International express shipping (DHL/FedEx/UPS) typically delivers within 3–5 business days worldwide.
Q: Can I get a formal quotation with shipping costs?
A: Absolutely. Our sales team is ready to provide a detailed Proforma Invoice (PI) including the most competitive shipping rates for your location.
Q: Do you offer discounts for bulk orders?
A: We provide volume-based pricing for large projects or multiple-item orders. Please contact us to get our Best Price Guarantee.
12-Month Comprehensive Warranty
Every part supplied by Global PLC Spare Hub is covered by a 12-month warranty from the date of invoice.
- Coverage: Functional defects and hardware failures under normal operating conditions.
- Commitment: We provide immediate repair, replacement, or a full refund for any verified defective components to minimize your operational downtime.
Returns & Exchange Policy
We offer a 30-day return policy to ensure you receive the exact part your system requires.
- Eligibility: Returns are accepted for uninstalled items in their original, factory-sealed packaging.
- RMA Process: Please contact our support team to obtain a Return Merchandise Authorization (RMA) number before shipping.
- Fast Processing: Refunds or exchanges are processed within 3–5 business days after the returned item passes our technical inspection.
Need Technical Assistance?Not sure if this part is compatible with your system? [Consult our Engineers] before purchasing to ensure 100% compatibility.



